Search results for: 'battery connector'
Learn
9V Battery Clip
Brand: Core Electronics
Standard 9V Battery Clip with leads.
$0.46 AUD, inc GST
9V Battery Clip to 2.1mm Barrel Jack Adapter
Brand: Core Electronics
This adapter consists of a 9V battery clip and a standard 5.5*2.1mm center positive barrel jack, it applied to power any device needs 9V input voltage...
$0.76 AUD, inc GST
Battery Connector Cable (5 pcs)
Brand: RAKwireless
A pre-crimped connector perfect for RAKWireless boards (and others) with the same wiring polarity.
$3.35 AUD, inc GST
JST RCY Connector Pack, Male
Brand: Pololu
This JST RCY plug is also referred to as a BEC (battery eliminator circuit) connector and is commonly used with battery packs for RC applications. The connector is keyed so that power cannot be reversed. You can use a crimping tool to attach these connectors to your own 22- to 28-AWG wires. This pack contains enough housings and crimp pins (including two spare pins) for 3 male connectors.
$6.30 AUD, inc GST
Deans Connector - M/F Pair
Brand: Sparkfun
Do you have an R/C vehicle battery pack that desperately needs a Deans connector? With our new M/F Deans connector pair, you’ll have just what you need to safely and securely connect your battery or anything else that requires a mini T Plug.
$2.25 AUD, inc GST
9V battery clip with 5.5mm/2.1mm plug
Brand: Adafruit
I found these high-quality battery clips. They're molded plastic so they wont tear like cheap clips, and they cover the battery terminals to prevent shorts. Comes...
$5.95 AUD, inc GST
Tamiya Connector Pack, Female
Brand: Pololu
This style of high-current connector is commonly used with the 7.2V sub-C battery packs that power many RC cars. The connector is keyed so that power cannot be reversed, and a latch secures the connection so that it will not become disconnected. You can use a crimping tool to attach these connectors to your own 14- to 20-AWG wires. This pack contains enough housings and crimp pins (including two spare pins) for 3 female connectors.
$8.25 AUD, inc GST
6xAA Battery Holder with DC2.1 Power Jack
Brand: DFRobot
This battery holder can hold 6 AA battery which can make 7.2 V rechargeable battery pack from NiMH / NiCd cells or 9V battery pack from alkaline cells.
$4.39 AUD, inc GST
Tamiya Plug with 10cm Leads, Male
Brand: Pololu
This style of high-current connector is commonly used with the 7.2V battery packs that power many RC cars. The connector is keyed so that power cannot be reversed, and a latch secures the connection so that it will not become disconnected. This male Tamiya connector has 10cm 14-AWG leads with stripped and tinned terminations.
$6.60 AUD, inc GST
6 x AA battery holder with 5.5mm/2.1mm plug
Brand: Adafruit
Make a portable power brick with plenty of juice! Use Alkaline AA's for a 9V 3000-4000mAh power supply, or rechargeable NiMH for 2000mAh 7.5V supply. Either one...
$7.75 AUD, inc GST
2-Way 18650 Battery Holder
This easy-to-use 16850 battery holder with dual-slot offers micro and type-C charging inputs, five 5V/2A output ports, five 3.3V/1A output ports and one...
$20.33 AUD, inc GST
2 x 18650 Battery Holder with DC2.1 Power Jack
Brand: DFRobot
The 18650 lithium battery is a commonly used lithium battery in electronic products. It is often used in batteries of laptop computers and power banks. 18650, which...
$3.40 AUD, inc GST
3 x 18650 Battery Holder with DC2.1 Power Jack
Brand: DFRobot
The 18650 lithium battery is a commonly used lithium battery in electronic products. It is often used in batteries of laptop computers and power banks. 18650, which...
$4.40 AUD, inc GST
6-AA Battery Holder
Brand: Pololu
Battery holder for six AA batteries.
$8.80 AUD, inc GST
4-AA Battery Holder
Brand: Pololu
Battery holder for four AA batteries.
$5.65 AUD, inc GST
3-AA Battery Holder
Brand: Pololu
Battery holder for three AA cells.
$3.60 AUD, inc GST
4 x AA Battery Holder with On/Off Switch
Brand: Adafruit
Make a nice portable power pack with this 4 x AA battery holder. It fits any alkaline or rechargeable AA batteries in series. There's a snap on cover and an on/off...
$7.70 AUD, inc GST
2xAAA Battery Holder with JST-PH Connector
Brand: Kitronik
2xAAA Battery Cage with JST connector. Supplied with 145mm colour coded leads. Perfect as a power supply to the BBC micro:bit.
$1.90 AUD, inc GST
9V Battery Holder
Brand: Sparkfun
This 9V battery holder allows your battery to snap in tight and holds it in place, which is great in situations where you don’t want the battery just hanging. It also has three mounting holes so you can attach it securely to your enclosure.
$7.35 AUD, inc GST
4 x AA Battery Holder with Premium Jumper Header Wires
Brand: Adafruit
Adafruit have got battery holders for all sorts of needs and projects! Waterproof? Here ya go. With an on/off switch? Easy peasy. Here's Adafruit's latest addition in classy Adafruit...
$7.50 AUD, inc GST
18650 Battery Holder (Surface Mount Tabs)
Brand: Core Electronics
Cradle your 18650 batteries with these ABS holders
$1.85 AUD, inc GST
9V battery holder with switch & 5.5mm/2.1mm plug
Brand: Adafruit
This is a 9V battery pack with on/off switch and a pre-attached 5.5mm/2.1mm center-positive barrel plug. Use this to battery-power your Arduino (or other electronic...
$8.75 AUD, inc GST
4×AA Battery Holder (with Power Switch, DC2.1 Jack, and Cover)
Brand: DFRobot
This battery holder can hold 4 AA batteries and comes with a DC 2.1 jack that offers a simpler and more secure wire connection...
$3.83 AUD, inc GST
2-C Battery Holder
Brand: Pololu
Battery holder for two C cells.
$8.70 AUD, inc GST
3 x AAA Battery Holder with On/Off Switch and 2-Pin JST-PH
Brand: Adafruit
This battery holder connects 3 AAA batteries together in series for powering all kinds of projects. Adafruit spec'd these out because the box is slim, and 3 AAA's add...
$5.40 AUD, inc GST
8-AA Battery Holder, Back-to-Back
Brand: Pololu
Battery holder for eight AA cells arranged as two back-to-back four-cell holders.
$7.60 AUD, inc GST
8 x AA battery holder with 5.5mm/2.1mm Plug and On/Off Switch
Brand: Adafruit
Make a portable power brick with plenty of juice! Use Alkaline AA's for a 12V 3000-4000mAh power supply, or rechargeable NiMH for 2000mAh 9.6V supply. Either one...
$16.90 AUD, inc GST
4-AA Battery Holder, Back-to-Back
Brand: Pololu
Battery holder for four AA cells arranged as two back-to-back two-cell holders.
$5.20 AUD, inc GST
8 x AA battery holder
Brand: Adafruit
When you need a portable 12V power pack, this big holder will do the job! The holder will store 8 AA batteries end to end, to give approximately 12VDC output with...
$6.40 AUD, inc GST
Battery Holder 4xAA with Cover and Switch
Brand: Sparkfun
This 4xAA battery holder puts a nice finishing touch on your battery powered project. This holder features a removable, sliding cover, which is secured with a small phillips head screw. Another bonus is the ON/OFF switch which can be used to control power to your project.
$5.40 AUD, inc GST
3-AAA Battery Holder, Enclosed with Switch
Brand: Pololu
Enclosed battery holder for three AAA cells. This holder features a lid that slides over the batteries and snaps into place to fully enclose them. It also features a switch that lets you open and close the electrical connection between the batteries and the holder’s leads.
$8.70 AUD, inc GST
6xAA Battery Holder(double layer)
Brand: DFRobot
This battery holder can hold 6 AA battery which can make 7.2 V rechargeable battery pack from NiMH / NiCd cells or 9V battery pack from alkaline cells.
$2.17 AUD, inc GST
Battery Holder 3xAA with Cover and Switch
Brand: Sparkfun
This 3xAA battery holder puts a nice finishing touch on your battery powered project. This holder features a removable, sliding cover, which is secured with a small phillips head screw. Another bonus is the ON/OFF switch which can be used to control power to your project.
$5.90 AUD, inc GST
Battery Holder 2xAA with Cover and Switch - JST-XH Connector
Brand: Sparkfun
This 2xAA battery holder puts a nice finishing touch on your battery powered project. This holder features a removable, sliding cover, which is secured with a small Phillips head screw. Another bonus is the ON/OFF switch which can be used to control power to your project.
$3.80 AUD, inc GST
4 x AA Battery Holder with 2.1mm Plug
Brand: Adafruit
Here's another addition to Adafruit's growing family of AA battery holders. A holder for four (4) AA batteries! It's got an 8" long power cable with a 2.1mm DC jack at...
$6.90 AUD, inc GST
2 x AA Battery Holder with Premium Jumper Header Wires
Brand: Adafruit
Adafruit have got battery holders for all sorts of needs and projects! Waterproof? Here ya go. With an on/off switch? Easy peasy. Here's Adafruit's latest addition in classy Adafruit...
$4.15 AUD, inc GST
6-AA Battery Holder, Enclosed with Switch
Brand: Pololu
Enclosed battery holder for six AA cells. This holder features a lid that slides over the batteries and snaps into place to fully enclose them. It also...
$14.20 AUD, inc GST
2-AA Battery Holder
Brand: Pololu
Battery holder for two AA cells.
$5.20 AUD, inc GST
5 x AA Battery Holder with 2.1mm DC Jack
Brand: Adafruit
Here's yet another addition to Adafruit's family of AA battery holders. It's a holder for five (5) AA batteries, with 5" wire leads. It's black and has a 2.1mm barrel plug...
$8.95 AUD, inc GST
2-AAA Battery Holder
Brand: Pololu
Battery holder for two AAA cells.
$2.80 AUD, inc GST
Makers love reviews as much as you do, please follow this link to review the products you have purchased.