Search results for: 'jst battery cable'

This 6" (15cm) cable has two 26AWG conductors with a 2.5mm-pitch 2-pin female JST XH-style connector. The spacing is very close to 0.1", which means this connector will work with 0.1" male header pins and standard perfboards and solderless breadboards. The other ends of the wires are unterminated; they can be cut to length to match your application. The red and black wires are twisted together to reduce noise.

This cable will let you turn a JST PH 4-pin cable port into 3 individual wires with high-quality 0.1" female sockets on the end. Adafruit are carrying these to match up...

These solid 2.5mm pitch connector cable pairs are great when you need something that can carry a couple amps of current, easy to connect and disconnect, and is just-about 0.1" pitch compatible.

These 2-wire cables are 16cm long and come as a set. One side has a 2-pin JST SM type connector plug on the end. The other side has a matching 2-pin JST SM type...

This 30 cm (12") cable has six 28 AWG wires and a 6-pin female JST SH-type connector that works with our Micro Metal Gearmotor Encoders with top-entry...

These 3-wire cables are 163mm (6.4") long and come as a set. One cable has a JST SM type connector plug on the end. The other cable has a matching JST SM type receptacle...

These solid 2.5mm pitch connector cable pairs are great when you need something that can carry a couple amps of current, easy to connect and disconnect, and is just-about 0.1" pitch compatible.

This 12 cm (4.5") cable has six 28 AWG wires and a 6-pin female JST SH-type connector that works with our Micro Metal Gearmotor Encoders with top-entry...

These solid 2.5mm pitch connector cable pairs are great when you need something that can carry a couple amps of current, easy to connect and disconnect, and is just-about 0.1" pitch compatible.

This battery holder connects 3 AAA batteries together in series for powering all kinds of projects. Adafruit spec'd these out because the box is slim, and 3 AAA's add...

2xAAA Battery Cage with JST connector. Supplied with 145mm colour coded leads. Perfect as a power supply to the BBC micro:bit.

This 2-conductor, 25 cm (10") cable has 24 AWG wires and 2-pin female JST PH-type connectors (2mm pitch) on both ends...

This 10 cm (4") cable has six 28 AWG wires and 6-pin female JST SH-type connectors on both ends. These connectors work with our Micro Metal Gearmotor ...

This cable will let you turn a JST PH 3-pin cable socket into 3 individual tinned wires. These are great to match up with Adafruit's JST 3-PH cables, for extending and...

This cable is a little over 100mm / 4" long and fitted with JST-GH compatible 6-pin connectors on either end. We dig the solid and compact nature of...

This 2-conductor, 30 cm (12") cable has 28 AWG wires and a 2-pin female JST SH-type connector on one end. The other ends of the wires are unterminated;...

This 4-conductor, 75 cm (30") cable has 28 AWG wires and a 4-pin female JST SH-type connector on one end. The other ends of the wires are unterminated;...

This 5-conductor, 10 cm (4") cable has 24 AWG wires and 5-pin female JST PH-type connectors (2mm pitch) on both ends...

This 6-conductor, 10 cm (4") cable has 24 AWG wires and 6-pin female JST PH-type connectors (2mm pitch) on both ends...

This is a 2-pin JST RCY connector typically used for low-voltage applications running 10A or less. They are commonly found in RC vehicles. These come in a bag of 1 male plug, 1 female plug, plus pins to connect them both. The pins crimp to your cable and are inserted into the housing.

This is a simple four wire cable. Great for jumping from board to board or just about anything else. These cables mate with the connectors listed below. They have bare wires on one end and a 4-pin JST SH connector on the other end with a mating socket.

These 5-wire cables are 168mm (6.6") long and come as a set. One cable has a JST SM type connector plug on the end. The other cable has a matching JST SM type receptacle...

This is a two-cell AA battery holder with 6" (~150mm) cable that has been terminated with a JST-PH connector.

This battery holder connects 2 AA batteries together in series for powering all kinds of projects. Adafruit spec'd these out because the box is fairly slim, and 2 AA's...

These 4-wire cables are 15cm long and come as a set, one side has a JST SM type connector plug on the end. The other side has a matching JST SM type receptacle connector...

This is a simple six wire cable. Great for jumping from board to board or just about anything else. These cables mate with the connectors listed below. They have bare wires on one end and a 6-pin JST SH connector on the other end with a mating socket.