Search results for: &#039;12v relay&#039;

This solid state relay/switch board provides a way to make and break an electrical connection based on a 2.7 V to 40 V input signal. Its electrically...

$7.90 AUD, inc GST

Solid State Relay - 40A (3-32V DC Input)

Brand: SparkFun

A solid-state relay (SSR) allows you to control high-current AC loads from lower-voltage DC control circuitry.

$29.40 AUD, inc GST

Zooz Z-Wave Universal Relay AU

Z-Wave relay with two NO/NC outputs and dual dry-contact 12-24V inputs to control DC up/down motors, sprinklers and gates.

$77.45 AUD, inc GST

Industrial 8-Channel RP2350 Relay Module (Ethernet + Isolated RS485)

Bring programmable switching to a DIN rail - high-power relays, isolated field inputs and a wired network connection in one unit.

$71.22 AUD, inc GST

Pololu Basic SPDT Relay Carrier with 12VDC Relay (Assembled)

The Pololu basic relay carrier modules allow simple control of a single-pole, double-throw (SPDT) switch from low-voltage, low-current control signals. This item includes the basic carrier PCB with a soldered-in 12 V relay, 5.0 mm terminal blocks for the switch connections, and straight 0.1" male header for the control connections. The included power relay is an Omron G5LE-14-DC12 and is rated for up to 10 A under most conditions.

$14.70 AUD, inc GST

Pololu Basic SPDT Relay Carrier with 12VDC Relay (Partial Kit)

The Pololu basic relay carrier modules allow simple control of a single-pole, double-throw (SPDT) switch from low-voltage, low-current control signals. This item includes the basic carrier PCB along with an Omron G5LE-14-DC12 12 V relay, 5.0 mm terminal blocks, and 0.1" male headers in straight and right-angle versions. Surface-mount components are pre-assembled on the PCB, but the through-hole components are not installed. The included power relay is rated for up to 10 A under most conditions.

$13.20 AUD, inc GST

Modbus RTU 32-Ch Relay Module

Modbus RTU 32-Ch Relay Module, RS485 Interface, With Multiple Isolation Protection Circuits, Industrial-Grade, Rail-Mount Case

$119.95 AUD, inc GST

These are high quality Single Pole - Double Throw (SPDT) sealed relays. Use them to switch high voltage, and/or high current devices.

Relay SPDT Sealed

Brand: SparkFun

$5.50 AUD, inc GST

Pololu Basic 2-Channel SPDT Relay Carrier with 12VDC Relays (Assembled)

The Pololu basic 2-channel relay carrier modules allow simple, independent control of two single-pole, double-throw (SPDT) switches from low-voltage, low-current control signals. This item includes the basic carrier PCB with two soldered-in 12 V relays, 5.0 mm terminal blocks for the switch connections, and straight 0.1" male header for the control connections. The included power relays are Omron G5LE-14-DC12 and are rated for up to 10 A under most conditions.

$23.90 AUD, inc GST

Pololu RC Switch with Isolated Solid State Relay/Switch, SPST, 30V, 10A

This module is a solid state relay/switch with a radio control (RC) interface, enabling switching of large, electrically isolated loads in RC systems...

$21.40 AUD, inc GST

Gravity: Easy Relay Module

The traditional relay module has complicated wiring and is not friendly to beginners or students. The simple switch module simplifies the wiring method for connecting...

$13.66 AUD, inc GST

SSR-60DA Solid State Relay

A solid state relay (SSR) allows you to control high-current AC loads from lower voltage DC control circuitry...

$11.50 AUD, inc GST

The SparkFun Qwiic Quad Relay is a unique power accessory board that has been designed for switching not one but four high powered devices from your Arduino or another...

SparkFun Qwiic Quad Relay

Brand: SparkFun

$61.75 AUD, inc GST

Out of stock

Industrial 4-Channel Relay Module

The module adopts the standard Modbus RTU protocol, the communication interface supports RS485 or RS232 and supports communication baud rates of 2400, 4800, 9600...

$52.48 AUD, inc GST

Pololu RC Switch with Isolated Solid State Relay/Switch, SPST, 60V, 6A

This module is a solid state relay/switch with a radio control (RC) interface, enabling switching of large, electrically isolated loads in RC systems...

$20.05 AUD, inc GST

Modbus RTU 8-ch Latching Relay Module (C) with RS485 Interface, Multi Isolation Protection Circuits, Rail-mounted Case

Modbus RTU 8-ch Latching Relay Module (C) with RS485 Interface, Multi Isolation Protection Circuits, Rail-mounted Case...

$64.15 AUD, inc GST

Pololu RC Switch with Isolated Solid State Relay/Switch, SPST, 60V, 6A (Soldered Connectors)

This module is a solid state relay/switch with a radio control (RC) interface, enabling switching of large, electrically isolated loads in RC systems...

$22.30 AUD, inc GST

Industrial Modbus RTU 8-ch Relay Module (E) with RS485 Interface

Industrial Modbus RTU 8-ch Relay Module (E) with RS485 Interface, 30A High Current, Multi Isolation Protection Circuits, Onboard Optocoupler Isolation,...

$90.70 AUD, inc GST

Pololu RC Switch with Isolated Solid State Relay/Switch, SPST, 30V, 10A (Soldered Connectors)

This module is a solid state relay/switch with a radio control (RC) interface, enabling switching of large, electrically isolated loads in RC systems...

$23.95 AUD, inc GST

Control high-power devices or circuits with a single digital connection.

Modulino Latch Relay

Brand: Arduino

$16.75 AUD, inc GST

Out of stock

Power Relay Base to suit SY4065

DIN rail mount for DPDT Relays with screw terminals.

$9.70 AUD, inc GST

A Feather board without ambition is a Feather board without FeatherWings! This is the Latching Mini Relay FeatherWing. It gives you power to control, and control...

Adafruit Latching Mini Relay FeatherWing

Brand: Adafruit

$14.50 AUD, inc GST

A Feather board without ambition is a Feather board without FeatherWings! This is the Non-Latching Mini Relay FeatherWing. It gives you power to control, and control...

Adafruit Non-Latching Mini Relay FeatherWing

Brand: Adafruit

$14.55 AUD, inc GST

The Power + Relay HAT for Pi Zero is designed as an all-in-one simple automation add on for the Raspberry Pi Zero. It combines the beefy 5V 3A power...

Power + Relay HAT for Raspberry Pi Zero

Brand: The Pi Hut

$42.95 AUD, inc GST

Similar matches

5V Single Channel Relay Module 10A

A versatile, compact relay board that can drive up to 10A @28VDC while only drawing approximately 60mA at 5V.

$3.95 AUD, inc GST

5V 4 Channel Relay Module 10A

A versatile relay board with opto-isolated inputs. Each channel can switch up to 10A @28VDC

$6.40 AUD, inc GST

5V 2 Channel Relay Module 10A

A versatile relay board with opt-isolated inputs. Each channel can drive up to 10A @28VDC

$5.70 AUD, inc GST

Gravity: Digital Relay Module (Arduino and Raspberry Pi Compatible)

Introducing the Gravity Digital Relay Module – the latest addition to DFRobot’s Gravity series! This module is a little different to the other relays in our store...

$6.84 AUD, inc GST

2 Channel Solid State Relay Module (DC Control, AC Load)

This breakout module gives you access to a 2 channel solid state relay that can be switched with 3-5VDC

$5.40 AUD, inc GST

8 Channel Solid State Relay Module (DC Control, AC Loads)

This breakout module gives you access to a 8 channel solid state relay that can be switched with 3-5VDC

$26.75 AUD, inc GST

Relay Module V2 (Arduino Compatible)

The DFRobot Single Relay blocks the number of electronic modules. It can be used in interactive projects. It can also be used to control the lighting, electrical and other equipments. The modular design makes it easy to expand with the Arduino board (not included). The Relay output state by a light-emitting diode. It can be controlled through the digital IO port, such as solenoid valves, lamps, motors and other high current or high voltage devices.

$4.60 AUD, inc GST

Pololu Basic SPDT Relay Carrier with 5VDC Relay (Assembled)

The Pololu basic relay carrier modules allow simple control of a single-pole, double-throw (SPDT) switch from low-voltage, low-current control signals. This item includes the basic carrier PCB with a soldered-in 5 V relay, 5.0 mm terminal blocks for the switch connections, and straight 0.1" male header for the control connections. The included power relay is an Omron G5LE-14-DC5 and is rated for up to 10 A under most conditions.

$14.40 AUD, inc GST

Gravity: Magnetic Latching Relay for ESP32 / Arduino

This DFRobot magnetic latching relay is a new type of relay. It remains in the last position it was when last powered and features noiseless and low power...

$11.65 AUD, inc GST

Pololu RC Switch with Relay (Assembled)

This RC relay enables easy control of large, electrically isolated loads in radio control (RC) systems. The activation threshold and direction are configurable, and a safe-start feature reduces the likelihood of unexpected activation. This assembled version ships with the 5V relay, terminal block, and straight male header pins soldered in, so it can be integrated into hobby RC systems without the need for additional soldering. The included power relay is an Omron G5LE-14-DC5 and is rated for up to 10 A under most conditions.

$30.15 AUD, inc GST

WisBlock Relay Module RAK13007

Brand: RAKwireless

Single-channel WisBlock relay switches up to 250 VAC/10 A for control of motors, lights and conveyors in IoT projects.

$12.65 AUD, inc GST

XIAO 6-Channel Wi-Fi 5V DC Relay (ESP32-C6)

Brand: Seeed Studio

Six independently controlled relay channels in one compact enclosure, driven by a Seeed Studio XIAO ESP32-C6 with ESPHome firmware pre-installed.

$60.56 AUD, inc GST

Analog switches are a solid state alternative to relays, when you want a smaller, lower-power technology that won't wear out mechanically. As the name...

Adafruit STEMMA Analog SPDT Switch - MAX4544 12V - JST PH 2mm

Brand: Adafruit

$10.55 AUD, inc GST