Search results for: '1.27 mm'
JTAG (2x10 2.54mm) to SWD (2x5 1.27mm) Cable Adapter Board
Brand: Adafruit
This adapter board is designed for adapting a 'classic' 2x10 (0.1"/2.54mm pitch) JTAG cable to a slimmer 2x5 (0.05"/1.27mm pitch) SWD Cable. It's helpful for using...
$9.40 AUD, inc GST
10-pin 2x5 Socket-Socket 1.27mm IDC (SWD) Cable - 150mm long
Brand: Adafruit
These little cables are handy when programming or debugging a tiny board that uses 10-pin 1.27mm (0.05") pitch SWD programming connectors. Adafruit see these connectors...
$6.20 AUD, inc GST
SWD (2x5 1.27mm) Cable Breakout Board
Brand: Adafruit
This adapter board is designed to make it easier to use ARM dev boards that use slimmer 2x5 (0.05"/1.27mm pitch) SWD cables for programming. It's helpful for using...
$5.90 AUD, inc GST
Header - 2x5 Pin (Male, 1.27mm)
Brand: Sparkfun
This is a super small, 2x5 pin male PTH header. This header is in the common configuration for JTAG applications. Each pin has a spacing of 1.27mm in between each...
$3.65 AUD, inc GST
Makerverse Protoboard for Raspberry Pi Pico
Brand: Makerverse
The centre of your next project. Mount your RPi Pico with headers, or solder directly to the protoboard.
$5.15 AUD, inc GST
NanoS3 (Onboard Antenna)
Brand: Unexpected Maker
Your very own NanoS3 with CircuitPython pre-installed
$31.76 AUD, inc GST
Similar matches
Male Pin Header 2.54mm (1x20)
Brand: Core Electronics
Perfect for prototyping, these straight male headers are a super common header type so grab a few and put your ideas to the test!
$0.35 AUD, inc GST
Female Header 2.54mm (2x20)
Brand: Core Electronics
Perfect for prototyping, this straight female header is a commonly used header type so grab a few and put your ideas to the test!
$0.82 AUD, inc GST
RP2040 MCU based, 1.28inch Round LCD (onboard sensors)
Brand: Waveshare
RP2040 MCU Board, With 1.28inch Round LCD, accelerometer and gyroscope Sensor...
$26.25 AUD, inc GST
0.100" (2.54 mm) Female Header: 1x4-Pin, Right-Angle
Brand: Pololu
This connector is a single-row, 4-pin, right-angle female header strip designed to match 0.1" male headers. The order quantity must be a multiple of two.
$1.05 AUD, inc GST
10-pin 2x5 Socket-Socket 1.27mm IDC (SWD) Cable - 300mm long
Brand: Adafruit
These cables are handy when programming or debugging a tiny board that uses 10-pin 1.27mm (0.05") pitch SWD programming connectors. We see these...
$6.55 AUD, inc GST
0.05" Pitch Thru-Hole Female Socket Header 2x5 10-pin
Brand: Adafruit
The small, but mighty 0.05" Pitch Thru-hole Female Socket Header 2x5 10-pin. We had an extra batch of these headers when we were adding...
$1.05 AUD, inc GST
Pogo Pin Probe Clip - 2x5 1.27mm Pitch SWD
Brand: Adafruit
The Pogo Pin Probe Clip with 2x5 0.05" pitch SWD spacing is a great way to test and connect with pin-point accuracy without soldering! It's sort...
$37.50 AUD, inc GST
Mini SWD 0.05 Pitch Connector - 10 Pin SMT Box Header
Brand: Adafruit
Adafruit have carrying a new 1.27mm pitch 2x5 Mini SWD 0.05" Pitch Connector. It's a tinier, bite-sized version of the Box Header used on Adafruit's SWD Cable Breakout Board. Instead...
$3.45 AUD, inc GST
SWD 0.05 Pitch Connector - 10 Pin SMT Box Header
Brand: Adafruit
This 1.27mm pitch, 2x5 male SMT Box Header is the same one used on Adafruit's SWD Cable Breakout Board. The header alone is great if you want to incorporate this piece...
$3.05 AUD, inc GST
1.25mm Pitch 2-pin Cable 20cm long 1:1 Cable - Molex PicoBlade Compatible
Brand: Adafruit
When 0.1" is too big, and JST PH's too chunky, this ultra-slim 1.25mm connector cable is a reliable alternative. These are 1.25mm pitch but have a nice clicky connection.
$1.50 AUD, inc GST
1.25mm Pitch 4-pin Cable 20cm long 1:1 Symmetric Cable - Molex PicoBlade Compatible
Brand: Adafruit
When 0.1" is too big, and JST PH's too chunky, this ultra-slim 1.25mm connector cable is a reliable alternative. These are 1.25mm pitch but have a nice clicky connection.
$1.85 AUD, inc GST
2.54mm 1x3-Pin Straight Female Header
Brand: Core Electronics
Got some 2.54mm | 0.1" pitch through holes on your PCB you need to connect to? Here's some headers you can use.
$0.11 AUD, inc GST
GPIO Ribbon Cable 2x8 IDC Cable - 16 pins 12 long
Brand: Adafruit
Connect this to that! If you want to bridge those contacts out onto another PCB, you'll want this GPIO Ribbon Cable! Comes in a classic Adafruit Black, has a nice...
$4.75 AUD, inc GST
1.25mm Pitch 7-pin Cable 20cm long 1:N Cable - Molex PicoBlade Compatible
Brand: Adafruit
When 0.1" is too big, and JST PH's too chunky, this ultra-slim 1.25mm connector cable is a reliable alternative. These are 1.25mm pitch but have a nice clicky connection.
$2.50 AUD, inc GST
Makers love reviews as much as you do, please follow this link to review the products you have purchased.