Adafruit AHT20 - Temperature & Humidity Sensor Breakout Board - STEMMA QT / Qwiic

SKU: ADA4566 Brand: Adafruit
The AHT20 is a nice but inexpensive temperature and humidity sensor from the same folks that brought Adafruit the DHT22. You can take sensor readings as often as you like, and it uses standard I2C so its super easy to use with any Arduino or Linux/Raspberry Pi board.
$8.80 AUD, inc GST
$8.00 AUD, exc GST

In stock, ships same business day if ordered before 2PM
Delivered by Tue, 26th of Nov

Quantity Discounts:

  • 10-25 $7.76 (exc GST)
  • 25+ $7.60 (exc GST)
- +

2 from local stock, 1 supplier stock; your order will dispatch between Dec 1 to Dec 10. And yes, stock levels and lead times are accurate!

Shipping:

  • $7+ Standard (5+ days*, tracked)
  • $11+ Express (2+ days*, tracked)
  • FREE Pickup (Newcastle only - must order online*)

Shipping costs may increase for heavy products or large orders.

Exact shipping can be calculated on the view cart page.

*Conditions apply, see shipping tab below.

The AHT20 is a nice but inexpensive temperature and humidity sensor from the same folks that brought Adafruit the DHT22. You can take sensor readings as often as you like, and it uses standard I2C so its super easy to use with any Arduino or Linux/Raspberry Pi board.

This sensor has a typical accuracy of +- 2% relative humidity, and +-0.3 °C at 20-80% RH and 20-60 °C. There is only one I2C address so it's not a good option when you need multiple humidity sensors.

As with all Adafruit breakouts, Adafruit have done the work to make this handy temperature-and-humidity super easy to use. Adafruit have put it on a breakout board with the required support circuitry and connectors to make it easy to work with and is now a trend Adafruit have added SparkFun Qwiic compatible STEMMA QT JST SH connectors that allow you to get going without needing to solder. Just use a STEMMA QT adapter cable, plug it into your favorite microcontroller or Blinka supported SBC and you're ready to rock! QT Cable is not included, but Adafruit have a variety in the shop

Check out Adafruit's learning guide which has schematics, diagrams, libraries, and more!

Technical Details

Specifications:

  • Use with 3.3V or 5V power/logic
  • I2C address 0x38
  • Operational Temperature range: -40 to 85 °C (+-1 °C typical accuracy over entire range)
  • Operational Relative Humidity range: 0 to 100 RH% (+-3 % typical accuracy over entire range)

Revision History:

  • As of September 16, 2022 - this sensor breakout may come with black or tan STEMMA QT connectors - they work the same!
      RoHS 2 2011 65 EU Compliant
      RoHS 2 2015 863 EU Compliant
      Learn
      Sense temperature and humidity data for less!

      Product Comments

      Exact shipping can be calculated on the view cart page (no login required).

      Products that weigh more than 0.5 KG may cost more than what's shown (for example, test equipment, machines, >500mL liquids, etc).

      We deliver Australia-wide with these options (depends on the final destination - you can get a quote on the view cart page):

      • $3+ for Stamped Mail (typically 10+ business days, not tracked, only available on selected small items)
      • $7+ for Standard Post (typically 6+ business days, tracked)
      • $11+ for Express Post (typically 2+ business days, tracked)
      • Pickup - Free! Only available to customers who live in the Newcastle region (must order online and only pickup after we email to notify you the order is ready). Orders placed after 2PM may not be ready until the following business day.

      Non-metro addresses in WA, NT, SA & TAS can take 2+ days in addition to the above information.

      Some batteries (such as LiPo) can't be shipped by Air. During checkout, Express Post and International Methods will not be an option if you have that type of battery in your shopping cart.

      International Orders - the following rates are for New Zealand and will vary for other countries:

      • $12+ for Pack and Track (3+ days, tracked)
      • $16+ for Express International (2-5 days, tracked)

      If you order lots of gear, the postage amount will increase based on the weight of your order.

      Our physical address (here's a PDF which includes other key business details):

      Unit 18, 132 Garden Grove Parade
      Adamstown
      NSW, 2289
      Australia

      Take a look at our customer service page if you have other questions such as "do we do purchase orders" (yes!) or "are prices GST inclusive" (yes they are!). We're here to help - get in touch with us to talk shop.

      Have a product question? We're here to help!

      Write Your Own Review

      Videos

      View All

      Guides

      Weather Station with Arduino Tutorial

      This Weather Station with Arduino was designed for the South Australia Catholic Education STEM Weath...
      This Weather Station with Arduino was designed for the South Australia Catholic Education STEM Weath...

      Micro:bit Temperature and Humidity Sensing

      The Micro:bit has the ability to measure temperature by sensing the temperature of the sil...
      The Micro:bit has the ability to measure temperature by sensing the temperature of the sil...

      Temperature Sensing with the TMP36 and Pycom

      Note: With the rollout of TTNv3, the "Setup" section of this guide no longer works - but we're keepi...
      Note: With the rollout of TTNv3, the "Setup" section of this guide no longer works - but we're keepi...

      The Maker Revolution

      The Maker Revolution celebrates the creation of new devices and the modification of existing ones - ...
      The Maker Revolution celebrates the creation of new devices and the modification of existing ones - ...

      Projects

      Have you ever wanted to make a Weatherproof Weather and Air Quality System that transmits its edge-...

      Camera Dew Controller

      Introduction My passion hobby is night-time time-lapse photography and astrophotography/nightscape...
      Introduction My passion hobby is night-time time-lapse photography and astrophotography/nightscape...

      ThingSpeak temperature & pressure logger

      This project logs temperature and pressure observations to a ThingSpeak channel using an ESP8266 WiF...
      This project logs temperature and pressure observations to a ThingSpeak channel using an ESP8266 WiF...
      Feedback

      Please continue if you would like to leave feedback for any of these topics:

      • Website features/issues
      • Content errors/improvements
      • Missing products/categories
      • Product assignments to categories
      • Search results relevance

      For all other inquiries (orders status, stock levels, etc), please contact our support team for quick assistance.

      Note: click continue and a draft email will be opened to edit. If you don't have an email client on your device, then send a message via the chat icon on the bottom left of our website.

      Makers love reviews as much as you do, please follow this link to review the products you have purchased.