13.3inch e-Paper Display (B), E-Ink Display 960×680 pixels - Red / Black / White

SKU: WS-27236 Brand: Waveshare
13.3inch e-Paper Display (B), E-Ink Display, 960×680 pixels, Red / Black / White, SPI Communication, Partial Refresh Support, Optional for e-Paper...
Special Price $292.75 AUD, inc GST
Regular Price $304.95 AUD, inc GST
$277.23 AUD, exc GST

Available with a lead time
Expect dispatch between Nov 22 and Nov 25

Quantity Discounts:

  • 3+ $257.82 (exc GST)
- +

0 from local stock, 1 supplier stock; your order will dispatch between Dec 1 to Dec 10. And yes, stock levels and lead times are accurate!

Shipping:

  • $7+ Standard (5+ days*, tracked)
  • $11+ Express (2+ days*, tracked)
  • FREE Pickup (Newcastle only - must order online*)

Shipping costs may increase for heavy products or large orders.

Exact shipping can be calculated on the view cart page.

*Conditions apply, see shipping tab below.

This e-paper display retains the last shown content without a backlight, even after power loss, making it efficient for various applications. Its ultra-low power consumption design ensures power is primarily needed only when refreshing the display. It comes with development resources and a manual, including a driver board circuit diagram and examples for platforms such as Raspberry Pi, Jetson Nano, Arduino, and STM32. For extended functionality, there's an optional e-Paper Driver HAT, which includes a standard Raspberry Pi 40PIN GPIO extension header that supports Raspberry Pi series boards and Jetson Nano. It utilizes a SPI interface for easy connection with controllers like Raspberry Pi, Jetson Nano, Arduino, and STM32, and it features an onboard voltage regulator making it compatible with both 3.3V and 5V MCUs.


Specifications

  • Operating Voltage:
    • Raw Display: 3.3V
    • e-Paper Driver HAT: 3.3V/5V
  • Grey Scale: 2
  • Interface: 3-wire SPI, 4-wire SPI
  • Partial Refresh Time: 2.9 seconds
  • Display Dimensions: 286.32 × 212.26 × 1.20 mm
  • Full Refresh Time: 22 seconds
  • Display Area: 275.52 × 195.16 mm
  • Refresh Power: 75 mW
  • Dot Pitch: 0.287 × 0.287 mm
  • Standby Current: <0.01 µA (almost none)
  • Resolution: 960 × 680 pixels
  • Viewing Angle: >170°
  • Display Color: Red, Black, White

 

 


Dimensions 13.3inch red / black / white e-Paper display, outline dimensions e-Paper Driver HAT, outline dimensions
Documents

 

 

 

Shipping List

  • 1 x 13.3inch e-Paper (B)
  • 1 x e-Paper Driver HAT + Adapter board + FFC cable
  • 1 x RPi screws pack (2pcs)
  • 1 x GH1.25 9PIN cable ~20cm

Product Comments

Exact shipping can be calculated on the view cart page (no login required).

Products that weigh more than 0.5 KG may cost more than what's shown (for example, test equipment, machines, >500mL liquids, etc).

We deliver Australia-wide with these options (depends on the final destination - you can get a quote on the view cart page):

  • $3+ for Stamped Mail (typically 10+ business days, not tracked, only available on selected small items)
  • $7+ for Standard Post (typically 6+ business days, tracked)
  • $11+ for Express Post (typically 2+ business days, tracked)
  • Pickup - Free! Only available to customers who live in the Newcastle region (must order online and only pickup after we email to notify you the order is ready). Orders placed after 2PM may not be ready until the following business day.

Non-metro addresses in WA, NT, SA & TAS can take 2+ days in addition to the above information.

Some batteries (such as LiPo) can't be shipped by Air. During checkout, Express Post and International Methods will not be an option if you have that type of battery in your shopping cart.

International Orders - the following rates are for New Zealand and will vary for other countries:

  • $12+ for Pack and Track (3+ days, tracked)
  • $16+ for Express International (2-5 days, tracked)

If you order lots of gear, the postage amount will increase based on the weight of your order.

Our physical address (here's a PDF which includes other key business details):

Unit 18, 132 Garden Grove Parade
Adamstown
NSW, 2289
Australia

Take a look at our customer service page if you have other questions such as "do we do purchase orders" (yes!) or "are prices GST inclusive" (yes they are!). We're here to help - get in touch with us to talk shop.

Have a product question? We're here to help!

Write Your Own Review

Videos

View All

Guides

7 Colour E-Ink Display For Raspberry Pi | Inky Impression 5.7" (7 Colour ePaper/eInk HAT)

It has finally happened, they figured it out! The new frontier of Colour Electronic Paper is here a...
It has finally happened, they figured it out! The new frontier of Colour Electronic Paper is here a...

Waveshare 5.5 Inch AMOLED Screen for Raspberry Pi

Ever wanted a pocket computer with a Full HD screen (1080x1920)? Love tiny GPIO screens like this ...
Ever wanted a pocket computer with a Full HD screen (1080x1920)? Love tiny GPIO screens like this ...

Tiny Screens for Raspberry Pi - Waveshare 3.5 Inch LCD

There is a whole range of Sub-4 Inch Displays that attach directly to the GPIO pins of Raspberry Pi ...
There is a whole range of Sub-4 Inch Displays that attach directly to the GPIO pins of Raspberry Pi ...

The Maker Revolution

The Maker Revolution celebrates the creation of new devices and the modification of existing ones - ...
The Maker Revolution celebrates the creation of new devices and the modification of existing ones - ...

Projects

Simple e-ink dashboard

The aim of my project was to make a small display to show information such as the clock, weather, ca...
The aim of my project was to make a small display to show information such as the clock, weather, ca...

Raspberry Pi Desk Clock with Data Display

This project uses a Raspberry Pi and TFT display panel to provide a desk clock that also monitors ou...
This project uses a Raspberry Pi and TFT display panel to provide a desk clock that also monitors ou...
Feedback

Please continue if you would like to leave feedback for any of these topics:

  • Website features/issues
  • Content errors/improvements
  • Missing products/categories
  • Product assignments to categories
  • Search results relevance

For all other inquiries (orders status, stock levels, etc), please contact our support team for quick assistance.

Note: click continue and a draft email will be opened to edit. If you don't have an email client on your device, then send a message via the chat icon on the bottom left of our website.

Makers love reviews as much as you do, please follow this link to review the products you have purchased.