xTool M2 3W Infrared Laser Module - 1064nm
Adds true metal engraving to your colour craft laser - permanent marks on jewellery, tools and tumblers, with no unnecessary steps.
Available with a lead time
Expect dispatch between Sep 21 and Sep 21
This product incorporates a laser system. Before purchasing or using laser equipment (including modules, components, or complete machines such as laser cutters and engravers), please consider the following:
- These products are intended for professional, educational, industrial, or supervised workshop environments.
- Operators should be appropriately trained and understand laser safety practices, including enclosures, signage, PPE, and safe operating procedures where applicable.
A declaration of use will need to be submitted during checkout.
Diode lasers bounce off shiny metal. Infrared light at 1064nm doesn't - it is absorbed straight into the surface, so stainless steel, aluminium, brass, copper, titanium and precious metals take a distinct, permanent mark with no marking spray or extra processes.
Built exclusively for the xTool M2, this module fits the same multi-function module holder as the diode head, so one machine covers both cutting and bare-metal marking. Two locating pins on the back align it into position, a single module cable connects it, and the M2 recognises it in xTool's software - swapping heads is an easy couple of minutes' work.
Metals aren't the whole story either. The infrared wavelength also bites into engineering plastics and rubber where a diode module produces weak, low-contrast results, opening up phone cases, chargers, earbud cases, candle lids and technical labels.
Features
Marks bare metal directly - no consumable marking spray, and nothing to fade or rub away afterwards
Produces high-contrast results on engineering plastics and rubber, where diode modules tend to leave faint or inconsistent marks
Swaps in and out without tools, so the M2 moves between diode cutting and infrared marking as the project demands
650nm red indicator laser lets you confirm placement on the workpiece before firing
Tight beam divergence holds fine detail — small text, serial numbers and intricate logos stay legible
Lens protector and nozzle are user-serviceable and replaceable, so routine cleaning keeps output power consistent over the module's life
Official xTool part — guaranteed mechanical fit, electrical compatibility and software support
Specifications
Property | Specification |
|---|---|
Working laser wavelength | 1064 nm |
Maximum power output | 3.3 W |
Beam divergence | 1.5 mrad (IEC 60825-1) |
Indicator laser | 650 nm, 390 µW |
Operating temperature | 0 °C to 35 °C |
Compatibility | xTool M2 |
Resources
xTool M2 Support Centre — machine guides, material settings and troubleshooting
What's Included
1x xTool M2 3W infrared laser module
1x Art scratch paper
1x User manual
Exact shipping can be calculated on the view cart page (no login required).
Products that weigh more than 0.5 KG may cost more than what's shown (for example, test equipment, machines, >500mL liquids, etc).
We deliver Australia-wide with these options (depends on the final destination - you can get a quote on the view cart page):
- $3+ for Stamped Mail (typically 10+ business days, not tracked, only available on selected small items)
- $7+ for Standard Post (typically 6+ business days, tracked)
- $11+ for Express Post (typically 2+ business days, tracked)
- Pickup - Free! Only available to customers who live in the Newcastle region (must order online and only pickup after we email to notify you the order is ready). Orders placed after 2PM may not be ready until the following business day.
Non-metro addresses in WA, NT, SA & TAS can take 2+ days in addition to the above information.
Some batteries (such as LiPo) can't be shipped by Air. During checkout, Express Post and International Methods will not be an option if you have that type of battery in your shopping cart.
International Orders - the following rates are for New Zealand and will vary for other countries:
- $12+ for Pack and Track (3+ days, tracked)
- $16+ for Express International (2-5 days, tracked)
If you order lots of gear, the postage amount will increase based on the weight of your order.
Our physical address (here's a PDF which includes other key business details):
40 Aruma Place
Cardiff
NSW, 2285
Australia
Take a look at our customer service page if you have other questions such as "do we do purchase orders" (yes!) or "are prices GST inclusive" (yes they are!). We're here to help - get in touch with us to talk shop.
Have a product question? We're here to help!
xTool M2 Colour Craft Laser Cutter - Standalone Machine (20W)SKU: CE11113Print in full colour, then cut it out on the same desktop machine. 20W of dio ...
- APM81815 Step-Down Voltage Regulator Carrier (5V)SKU: POLOLU-5267 Brand: Pololu
A tiny buck regulator that turns up to 72 V into a steady 5 V at ~1.1 A, with ...
- xTool M2 CMYK Inkjet Printing ModuleSKU: CE11125 Brand: xTool
Turn print-then-cut into a single seamless process - full CMYK at 1200 DPI, t ...
- xTool RA3 Lite Rotary Attachment for M2SKU: CE11122 Brand: xTool
Turn your xTool M2 into a rotary engraver for tumblers, mugs, rings and spher ...
Videos
View AllGuides
xTool P3 First Time Cutting Quick Start Guide
Setting Up Your xTool P3 | From Unboxing to First Cut
xTool P3 Overview | A New Standard for Making?
The Maker Revolution
Projects
The Rats Nest VCC Desktop Power Supply
Remote-Controlled Mars Rover
FlipperMate: Hands-Free Pinball
Makers love reviews as much as you do, please follow this link to review the products you have purchased.
Product Comments