FeatherS3 [D] ESP32-S3 Development Board

SKU: CE10241 Brand: Unexpected Maker

The ESP32-S3 in the Feather Format with a few more features than the average board!

$39.34 AUD, inc GST
$35.76 AUD, exc GST

Available with a lead time
Expect dispatch between Jul 28 and Jul 29

- +

0 from local stock, 1 supplier stock; your order will dispatch between Dec 1 to Dec 10. And yes, stock levels and lead times are accurate!

Shipping:

  • $7+ Standard (5+ days*, tracked)
  • $11+ Express (2+ days*, tracked)
  • FREE Pickup (Newcastle only - must order online*)

Shipping costs may increase for heavy products or large orders.

Exact shipping can be calculated on the view cart page.

*Conditions apply, see shipping tab below.

The Unexpected Maker FeatherS3 [D] delivers powerful ESP32-S3 performance in a Maker-loved board configuration

Designed with robust power management, built-in LiPo charging, USB-C with protection circuitry, and two STEMMA QT connectors, the FeatherS3 [D] enables effortless project builds- from wireless data loggers to low-power controllers. The 21 GPIO pins are broken out and full FeatherWing compatibility, allowing this board to be prototyped with in a breadboard, or baked into a custom configuration in a project.

Technical Specifications

  • Microcontroller: ESP32-S3, 32-bit dual-core 240 MHz with RISC-V ultra-low-power coprocessor
  • Wireless: 2.4 GHz WiFi (802.11 b/g/n); Bluetooth 5, BLE + Mesh
  • Memory: 16 MB QSPI flash; 8 MB additional QSPI PSRAM
  • Power: Dual 700 mA 3.3 V LDO regulators; ultra-low deep-sleep current
  • USB-C: Reverse-feed protection plus USB-serial JTAG interface
  • Battery: LiPo charging circuit; VBAT voltage measurement; 5 V presence detection
  • LEDs: Low-power RGB; power (red) and charge (orange) status indicators
  • Connectors: 2 × STEMMA QT (Qwiic compatible), JST-PH 2.0 mm for LiPo
  • GPIO: 21 pins accessible via headers (Feather layout)
  • Antennas: Onboard high-gain 3D antenna and u.FL external connector (switchable in software via RF switch; onboard selected by default for safety)
  • Dimensions: 52.3 mm × 22.9 mm; maximum thickness 6.6 mm (at JST battery port)

Compatibility

Platform Details
CircuitPython Pre-installed UF2 bootloader; easily updatable from circuitpython.org
ESP-IDF Supported for C/C++ development with Espressif SDK
MicroPython Community builds available
Arduino ESP32-S3 board support for Arduino IDE
PlatformIO Multi-platform environment via Visual Studio Code or CLI

Additional Resources

What’s Included

  • FeatherS3 [D] board
  • Colour pinout reference card
  • Unassembled male headers

This product is listed in:

Development Boards>ESP32

Product Comments

Exact shipping can be calculated on the view cart page (no login required).

Products that weigh more than 0.5 KG may cost more than what's shown (for example, test equipment, machines, >500mL liquids, etc).

We deliver Australia-wide with these options (depends on the final destination - you can get a quote on the view cart page):

  • $3+ for Stamped Mail (typically 10+ business days, not tracked, only available on selected small items)
  • $7+ for Standard Post (typically 6+ business days, tracked)
  • $11+ for Express Post (typically 2+ business days, tracked)
  • Pickup - Free! Only available to customers who live in the Newcastle region (must order online and only pickup after we email to notify you the order is ready). Orders placed after 2PM may not be ready until the following business day.

Non-metro addresses in WA, NT, SA & TAS can take 2+ days in addition to the above information.

Some batteries (such as LiPo) can't be shipped by Air. During checkout, Express Post and International Methods will not be an option if you have that type of battery in your shopping cart.

International Orders - the following rates are for New Zealand and will vary for other countries:

  • $12+ for Pack and Track (3+ days, tracked)
  • $16+ for Express International (2-5 days, tracked)

If you order lots of gear, the postage amount will increase based on the weight of your order.

Our physical address (here's a PDF which includes other key business details):

40 Aruma Place
Cardiff
NSW, 2285
Australia

Take a look at our customer service page if you have other questions such as "do we do purchase orders" (yes!) or "are prices GST inclusive" (yes they are!). We're here to help - get in touch with us to talk shop.

Have a product question? We're here to help!

Write Your Own Review

Videos

View All

Guides

WiFi GlowBit Matrix Control with WLED and ESP32/ESP8266 Dev Boards – Make Pixel Art with No Code!

Nothing beats bright shiny colourful lights and adding an extra dimension only makes them better.&n...
Nothing beats bright shiny colourful lights and adding an extra dimension only makes them better.&n...

Understanding ESP32 Naming Conventions

Espressif is a constantly ground-breaking company that produces lots of really cool development mod...
Espressif is a constantly ground-breaking company that produces lots of really cool development mod...

The Maker Revolution

The Maker Revolution celebrates the creation of new devices and the modification of existing ones - ...
The Maker Revolution celebrates the creation of new devices and the modification of existing ones - ...

Projects

Interactive Exercise Bike - Pedal Powered Visuals

This project turns a cheap exercise mini bike into a virtual bike. I made this project with my brot...
This project turns a cheap exercise mini bike into a virtual bike. I made this project with my brot...

Accurate IoT Clock With ESP8266

Being punctual is important. Hence accurate time is required. Clocks tend to miss out when it comes...
Being punctual is important. Hence accurate time is required. Clocks tend to miss out when it comes...

Spirit In A Box Halloween Trick

IntroductionThis project was born from the desire to craft a captivating and spine-tingling magic t...
IntroductionThis project was born from the desire to craft a captivating and spine-tingling magic t...
Feedback

Please continue if you would like to leave feedback for any of these topics:

  • Website features/issues
  • Content errors/improvements
  • Missing products/categories
  • Product assignments to categories
  • Search results relevance

For all other inquiries (orders status, stock levels, etc), please contact our support team for quick assistance.

Note: click continue and a draft email will be opened to edit. If you don't have an email client on your device, then send a message via the chat icon on the bottom left of our website.

Makers love reviews as much as you do, please follow this link to review the products you have purchased.