Raspberry Pi Zero W (Wireless)

Rating:
99% of 100
SKU: CE04754 Brand: Raspberry Pi Guides (8)
The smallest Raspberry Pi just got a whole lot cooler. The Raspberry Pi Zero W carries the same form factor and specifications as the original Pi Zero and provides built-in WiFi and Bluetooth 4.1!
$24.50 AUD, inc GST
$22.27 AUD, exc GST

In stock, ships same business day if ordered before 2PM
Fastest delivery: Tomorrow* Disclaimer:
The shipping address needs to be in the AusPost next day network and eParcel Express is chosen during checkout. On rare occasions, orders may be delayed by up to one business day due to AusPost pickup timings or for order verifications.

Quantity Discounts:

  • 5-10 $21.89 (exc GST)
  • 10+ $21.67 (exc GST)
- +

1686 from local stock, 1 supplier stock; your order will dispatch between Dec 1 to Dec 10. And yes, stock levels and lead times are accurate!

Favourite product

Shipping:

  • $7+ Standard (5+ days*, tracked)
  • $11+ Express (2+ days*, tracked)
  • FREE Pickup (Newcastle only - must order online*)

Shipping costs may increase for heavy products or large orders.

Exact shipping can be calculated on the view cart page.

*Conditions apply, see shipping tab below.

The smallest Raspberry Pi just got a whole lot cooler. The Raspberry Pi Zero W carries the same form factor and specifications as the original Pi Zero and provides built-in WiFi and Bluetooth (4.1 + BLE)!

The Raspberry Pi Zero W packs all of the Raspberry Pi goodness that you know and love, into a package that's a mere 66mm x 30.5mm x 5mm. It's tiny! Perfect for projects that would otherwise be off-limits to a full-size Raspberry Pi board, the Pi Zero W provides mini-HDMI,  micro-B On-the-Go (OTG) USB port, and the ability to add an unsoldered 40-pin header for use with hardware, HATs, and other devices.

Check out our Pi Zero W Starter Kit if you're new to Raspberry Pi. Our Essentials Kit has the basics required to make the change from a full-sized Pi to the smaller Zero W.

Tech Specs:

  • BCM 2835 SoC (ARM11 at 1GHz)
  • 512MB of RAM
  • On-board Wi-Fi - 2.4 GHz 802.11 b/g/n (BCM43438)
  • On-board Bluetooth 4.1 + HS Low-energy (BLE) (BCM43438)
  • Storage: micro-SD
  • Display: mini-HDMI
  • Power: USB micro-B
  • USB: 1 x USB micro-B
  • CSI camera connector (requires adaptor cable)
  • Unpopulated 40-pin GPIO connector (requires soldering)
  • Compatible with existing pHAT/HAT add-ons
  • Dimensions: 65mm x 30.5mm x 5mm
  • Weight: 9.3g
  • Power Supply Voltage Requirement: 5.1V

Documentation

Note: the Raspberry Pi Zero isn't a personal computer. It's more of a device that you can code/use for all sorts of educational, industrial and maker automation projects.

Recommended Accessories (buying kits will always be better value):

This product is listed in:

Raspberry Pi>Boards
Raspberry Pi>Boards>Zero

Product Comments

Exact shipping can be calculated on the view cart page (no login required).

Products that weigh more than 0.5 KG may cost more than what's shown (for example, test equipment, machines, >500mL liquids, etc).

We deliver Australia-wide with these options (depends on the final destination - you can get a quote on the view cart page):

  • $3+ for Stamped Mail (typically 10+ business days, not tracked, only available on selected small items)
  • $7+ for Standard Post (typically 6+ business days, tracked)
  • $11+ for Express Post (typically 2+ business days, tracked)
  • Pickup - Free! Only available to customers who live in the Newcastle region (must order online and only pickup after we email to notify you the order is ready). Orders placed after 2PM may not be ready until the following business day.

Non-metro addresses in WA, NT, SA & TAS can take 2+ days in addition to the above information.

Some batteries (such as LiPo) can't be shipped by Air. During checkout, Express Post and International Methods will not be an option if you have that type of battery in your shopping cart.

International Orders - the following rates are for New Zealand and will vary for other countries:

  • $12+ for Pack and Track (3+ days, tracked)
  • $16+ for Express International (2-5 days, tracked)

If you order lots of gear, the postage amount will increase based on the weight of your order.

Our physical address (here's a PDF which includes other key business details):

Unit 18, 132 Garden Grove Parade
Adamstown
NSW, 2289
Australia

Take a look at our customer service page if you have other questions such as "do we do purchase orders" (yes!) or "are prices GST inclusive" (yes they are!). We're here to help - get in touch with us to talk shop.

Have a product question? We're here to help!

Write Your Own Review

Videos

View All

Guides

How to set up a PiHole on a Raspberry Pi - Block All Ads and More!

Time to create a Little Red Advertisement Devouring Monster. This will be a self-hosted, network-wi...
Time to create a Little Red Advertisement Devouring Monster. This will be a self-hosted, network-wi...

PiicoDev Motion Sensor MPU-6050 - Raspberry Pi Guide

Introduction This guide will help you read motion data from your PiicoDev® Motion Sensor with a...
Introduction This guide will help you read motion data from your PiicoDev® Motion Sensor with a...

PiicoDev Precision Temperature Sensor TMP117 - Raspberry Pi Guide

Introduction This guide will help you read temperature data from your PiicoDev® Precision Temp...
Introduction This guide will help you read temperature data from your PiicoDev® Precision Temp...

PiicoDev Atmospheric Sensor BME280 - Raspberry Pi Guide

Introduction This guide will help you read weather data from your PiicoDev® Atmospheric S...
Introduction This guide will help you read weather data from your PiicoDev® Atmospheric S...

Projects

A Back to the Future Clock

This project started life as an alarm clock for my son made to look like the time circuit from the B...
This project started life as an alarm clock for my son made to look like the time circuit from the B...

RetroPie in a Cartridge

For $50 and some dedication a retro gaming console can be yours and with HDMI you can play it with a...
For $50 and some dedication a retro gaming console can be yours and with HDMI you can play it with a...

DIY Gameboy based on Raspberry Pi Zero W (PiGRRL)

We made a Pi Zero W retro-games console! The nostalgia is making me dizzy! If you'd like to build y...
We made a Pi Zero W retro-games console! The nostalgia is making me dizzy! If you'd like to build y...

Educational Workshops

Raspberry Pi Workshop for Beginners

Welcome to the Raspberry Pi Workshop for Beginners! Here you'll be able to follow along with our s...
Welcome to the Raspberry Pi Workshop for Beginners! Here you'll be able to follow along with our s...
Feedback

Please continue if you would like to leave feedback for any of these topics:

  • Website features/issues
  • Content errors/improvements
  • Missing products/categories
  • Product assignments to categories
  • Search results relevance

For all other inquiries (orders status, stock levels, etc), please contact our support team for quick assistance.

Note: click continue and a draft email will be opened to edit. If you don't have an email client on your device, then send a message via the chat icon on the bottom left of our website.

Makers love reviews as much as you do, please follow this link to review the products you have purchased.