FEETECH Sub-Micro Servo FS0307

SKU: POLOLU-3420 Brand: Pololu
The FS0307 analog sub-micro servo from FEETECH is a great tiny actuator for a small robot mechanism. Servo horns and associated hardware are included....
$10.60 AUD, inc GST
$9.64 AUD, exc GST

Available with a lead time
Expect dispatch between Nov 22 and Nov 25

Quantity Discounts:

  • 10-25 $9.35 (exc GST)
  • 25+ $9.15 (exc GST)
- +

0 from local stock, 1 supplier stock; your order will dispatch between Dec 1 to Dec 10. And yes, stock levels and lead times are accurate!

Shipping:

  • $7+ Standard (5+ days*, tracked)
  • $11+ Express (2+ days*, tracked)
  • FREE Pickup (Newcastle only - must order online*)

Shipping costs may increase for heavy products or large orders.

Exact shipping can be calculated on the view cart page.

*Conditions apply, see shipping tab below.

FEETECH FS0307 Sub-Micro Servo with a LEGO Minifigure as a size reference.

This is a great general-purpose actuator for tiny mechanisms. The FS0307 is a very small 4.4 g analog servo from FEETECH (formerly known as Fitec) that offers position control over an approximate 120° operating angle for servo pulses between 900 µs and 2100 µs. As with most servos, the pulse range can be expanded to achieve an expanded operating angle, but the limits of this are not specified by FEETECH. (In Pololu's tests, Pololu were able to get an expanded range of approximately 180° over a pulse range of 650 µs to 2500 µs, but as this is not part of FEETECH’s official specifications, it is possible different units will behave differently in this regard.)

The servo has a 6" (15 cm) cable that is terminated with a standard JR-style connector, which is Futaba-compatible, and it includes additional servo horns and mounting hardware.

The servo cable is terminated with a Futaba-compatible JR-style connector.

An example of hardware included with the FEETECH FS0307 sub-micro servo. Actual hardware might vary.

You can find more information about this servo in its datasheet (98k pdf).

Note that, as with most hobby servos, stalling or back-driving this servo can damage it.

People often buy this product together with:

Sub-Micro Servo 3.7g Sub-Micro Servo 3.7g
FEETECH Sub-Micro Servo FS0403 FEETECH Sub-Micro Servo FS0403
FEETECH Sub-Micro Servo FS0403-FB with Position Feedback FEETECH Sub-Micro Servo FS0403-FB with Position Feedback

Dimensions

Size: 20.0 × 8.3 × 17.3 mm
Weight: 4.4 g

General specifications

Digital?: N
Speed @ 6V: 0.09 sec/60°
Stall torque @ 6V: 0.6 kg·cm
Speed @ 4.8V: 0.10 sec/60°
Stall torque @ 4.8V: 0.5 kg·cm
Hardware included?: Y
Lead length: 6 in

 

This product is listed in:

Components & Parts>Motors>Servos>Micro

Product Comments

Exact shipping can be calculated on the view cart page (no login required).

Products that weigh more than 0.5 KG may cost more than what's shown (for example, test equipment, machines, >500mL liquids, etc).

We deliver Australia-wide with these options (depends on the final destination - you can get a quote on the view cart page):

  • $3+ for Stamped Mail (typically 10+ business days, not tracked, only available on selected small items)
  • $7+ for Standard Post (typically 6+ business days, tracked)
  • $11+ for Express Post (typically 2+ business days, tracked)
  • Pickup - Free! Only available to customers who live in the Newcastle region (must order online and only pickup after we email to notify you the order is ready). Orders placed after 2PM may not be ready until the following business day.

Non-metro addresses in WA, NT, SA & TAS can take 2+ days in addition to the above information.

Some batteries (such as LiPo) can't be shipped by Air. During checkout, Express Post and International Methods will not be an option if you have that type of battery in your shopping cart.

International Orders - the following rates are for New Zealand and will vary for other countries:

  • $12+ for Pack and Track (3+ days, tracked)
  • $16+ for Express International (2-5 days, tracked)

If you order lots of gear, the postage amount will increase based on the weight of your order.

Our physical address (here's a PDF which includes other key business details):

Unit 18, 132 Garden Grove Parade
Adamstown
NSW, 2289
Australia

Take a look at our customer service page if you have other questions such as "do we do purchase orders" (yes!) or "are prices GST inclusive" (yes they are!). We're here to help - get in touch with us to talk shop.

Have a product question? We're here to help!

Write Your Own Review

Videos

View All

Guides

Servos, Steppers or Solenoids? | Choosing an Actuator to Move Your Project

In this guide, we go over some common ways of adding motion to your project with actuators such as ...
In this guide, we go over some common ways of adding motion to your project with actuators such as ...

Getting Started with Servos | Examples with Raspberry Pi Pico

In this guide, we'll learn what a Servo is, when we might use one, how to choose a Servo, and final...
In this guide, we'll learn what a Servo is, when we might use one, how to choose a Servo, and final...

Setting up and Using the Adafruit 16-Channel Servo HAT for Raspberry Pi

This guide will teach you how to control up to 992 5V Servos through the GPIO pins on your Rasp...
This guide will teach you how to control up to 992 5V Servos through the GPIO pins on your Rasp...

Controlling Standard Servos with Raspberry Pi

This guide will teach you how to control any small and big servos with a Raspberry Pi 4 Model B (wor...
This guide will teach you how to control any small and big servos with a Raspberry Pi 4 Model B (wor...

Projects

Pico Baro V2

Introduction: The inspiration for this project stems back to my childhood when I was curious to f...
Introduction: The inspiration for this project stems back to my childhood when I was curious to f...

Micro:bit Random Selector

This project has been created to be used as an exemplar for Year 7 Technology students to demonstrat...
This project has been created to be used as an exemplar for Year 7 Technology students to demonstrat...

DIY Pi Buggy

The motivation behind this project came from a robotics and engineering club that I've been going to...
The motivation behind this project came from a robotics and engineering club that I've been going to...
Feedback

Please continue if you would like to leave feedback for any of these topics:

  • Website features/issues
  • Content errors/improvements
  • Missing products/categories
  • Product assignments to categories
  • Search results relevance

For all other inquiries (orders status, stock levels, etc), please contact our support team for quick assistance.

Note: click continue and a draft email will be opened to edit. If you don't have an email client on your device, then send a message via the chat icon on the bottom left of our website.

Makers love reviews as much as you do, please follow this link to review the products you have purchased.