E-Paper E-Ink Display Module (B) for Raspberry Pi Pico, 2.13inch, Red / Black / White, SPI (212×104)

2.13inch E-Paper E-Ink Display Module (B) For Raspberry Pi Pico, 250×122 Pixels, Red / Black / White, SPI Interface

Advantages Of EINK

E-paper display utilizes microcapsule electrophoretic technology for displaying, the principle is: charged particles suspended in clear fluid will move to sides of microcapsule when electric field is applied, making the microcapsule become visible by reflecting ambient light, just as traditional printed paper.
E-paper display will clearly display images/texts under lamplight or natural light, requires no backlight, and features nearly up to 180° viewing angle. It is usually used as e-reader due to its paper-like effect.

Colour EINK displays like this one require a full image refresh which takes around 15 seconds, if you need partial refresh support (less than 1 second) and full refresh times around a couple of seconds, then consider getting a faster monochrome EINK display like this one. If you need full refresh times below a second then it would be best to use a different technology like a OLED or LCD.

Features

• No backlight, keeps displaying last content for a long time even when power down
• Ultra low power consumption, basically power is only required for refreshing
• SPI interface, requires minimal IO pins
• Comes with development resources and manual (Raspberry Pi Pico C/C++ and MicroPython examples)
• Raspberry Pi Pico is NOT included, grab one here

Specifications

• Operating Voltage: 3.3V
• Communication Interface: 3-wire SPI, 4-wire SPI
• Outline Dimensions: 65x30.5mm
• Display Size:48.55x23.71mm
• Dot Pitch: 0.229x0.228mm
• Resolution 212x104 pixels
• Display Colour: Red, Black, White
• Grey Scale: 2
• Full Refresh Time: 15s
• Refresh Power: 26.4mW (typ.)
• Standby Current: <0.01uA (almost None)
• Viewing Angle: >170°

Dimensions

Pinout

Resources

Pico e-Paper 2.13 B - Waveshare Resources