Addressable LED Ring - 16 Bit WS2812 RGB LED

SKU: CE05353 Brand: Core Electronics
This is small circular ring of addressable RGB LEDs (16 total). Great for many maker projects.
$7.35 AUD, inc GST
$6.68 AUD, exc GST

In stock, ships same business day if ordered before 2PM
Delivered by Fri, 6th of Dec

Quantity Discounts:

  • 5-15 $6.55 (exc GST)
  • 15+ $6.35 (exc GST)
- +

5 from local stock, 1 supplier stock; your order will dispatch between Dec 1 to Dec 10. And yes, stock levels and lead times are accurate!

Shipping:

  • $7+ Standard (5+ days*, tracked)
  • $11+ Express (2+ days*, tracked)
  • FREE Pickup (Newcastle only - must order online*)

Shipping costs may increase for heavy products or large orders.

Exact shipping can be calculated on the view cart page.

*Conditions apply, see shipping tab below.

This is a small, circular ring of addressable RGB LEDs. To use them, simply wire to the back of the board pictured above (there are some solder pads available, labelled for data and power) and code it using an appropriate library.

Specifications

  • Voltage: 5VDC
  • Color: RGB
  • LED Type: 16x WS2812
  • Outer Diameter 45mm
  • Inner diameter of 33mm

Package Included

  • 1 x 16 Bit WS2812 5050 RGB LED Driver Development Board

*Note: This product does differ from the Adafruit Neopixel ring in regards to wiring, this product has flat pads for wiring on the back of the PCB, not through-hole pads.

Other LED Ring Sizes Available

8-LEDs CE05354

12-LEDs CE05346

16-LEDs CE05353

24-LEDs CE05348

This product is listed in:

Components & Parts>LEDs>Addressable
Wearables

Product Comments

Exact shipping can be calculated on the view cart page (no login required).

Products that weigh more than 0.5 KG may cost more than what's shown (for example, test equipment, machines, >500mL liquids, etc).

We deliver Australia-wide with these options (depends on the final destination - you can get a quote on the view cart page):

  • $3+ for Stamped Mail (typically 10+ business days, not tracked, only available on selected small items)
  • $7+ for Standard Post (typically 6+ business days, tracked)
  • $11+ for Express Post (typically 2+ business days, tracked)
  • Pickup - Free! Only available to customers who live in the Newcastle region (must order online and only pickup after we email to notify you the order is ready). Orders placed after 2PM may not be ready until the following business day.

Non-metro addresses in WA, NT, SA & TAS can take 2+ days in addition to the above information.

Some batteries (such as LiPo) can't be shipped by Air. During checkout, Express Post and International Methods will not be an option if you have that type of battery in your shopping cart.

International Orders - the following rates are for New Zealand and will vary for other countries:

  • $12+ for Pack and Track (3+ days, tracked)
  • $16+ for Express International (2-5 days, tracked)

If you order lots of gear, the postage amount will increase based on the weight of your order.

Our physical address (here's a PDF which includes other key business details):

Unit 18, 132 Garden Grove Parade
Adamstown
NSW, 2289
Australia

Take a look at our customer service page if you have other questions such as "do we do purchase orders" (yes!) or "are prices GST inclusive" (yes they are!). We're here to help - get in touch with us to talk shop.

Have a product question? We're here to help!

Write Your Own Review

Videos

View All

Guides

WLED Phone App | Control Addressable LEDs with an ESP32 or ESP8266

Today will be all about controlling Fully Addressable LED Lights using any Espressif ESP32 Dev...
Today will be all about controlling Fully Addressable LED Lights using any Espressif ESP32 Dev...

E-Textiles / Wearables Compared: LilyPad vs GEMMA vs Microbit

Every good E-Textiles or Wearables project needs to start somewhere, and the natural starting point ...
Every good E-Textiles or Wearables project needs to start somewhere, and the natural starting point ...

The Maker Revolution

The Maker Revolution celebrates the creation of new devices and the modification of existing ones - ...
The Maker Revolution celebrates the creation of new devices and the modification of existing ones - ...

Addressable RGB LED Controllers

Addressable RGB LED strips are one maker favourite that can really spruce up any project or even b...
Addressable RGB LED strips are one maker favourite that can really spruce up any project or even b...

Projects

Aircraft Lighting Model

The aim of this project was to create a working model of the aircraft exterior lighting systems. Ini...
The aim of this project was to create a working model of the aircraft exterior lighting systems. Ini...

HUGE LED Pixel Panel

I’ve always been fascinated by LED screens and seeing beautiful colours mix and merge to creat...
I’ve always been fascinated by LED screens and seeing beautiful colours mix and merge to creat...

Time lapsing in OctoPrint (Properly!)

Now that we have decked out our Lulzbot Taz 6 3D Printer with a really nice looking acrylic enclosur...
Now that we have decked out our Lulzbot Taz 6 3D Printer with a really nice looking acrylic enclosur...
Feedback

Please continue if you would like to leave feedback for any of these topics:

  • Website features/issues
  • Content errors/improvements
  • Missing products/categories
  • Product assignments to categories
  • Search results relevance

For all other inquiries (orders status, stock levels, etc), please contact our support team for quick assistance.

Note: click continue and a draft email will be opened to edit. If you don't have an email client on your device, then send a message via the chat icon on the bottom left of our website.

Makers love reviews as much as you do, please follow this link to review the products you have purchased.