Search results for: 'wireless communication modules'

40 results

IPEX4 to SMA Wireless Communication Female Connector Cable for LattePanda 3 Delta / 2 Alpha / 2 Delta (20cm)

Brand: DFRobot
The 20cm IPEX4 to SMA Adapter Cable is designed for LattePanda SBCs wireless communication. Features high-quality, stable signal transmission and...
$1.82 AUD, inc GST

HUSKYLENS 2 WiFi Module (Wireless AI Vision & AIoT)

Brand: DFRobot
Instantly upgrade HUSKYLENS 2 AI vision sensor with this Wi-Fi 6 module. Stream video wirelessly, build powerful AIoT applications, and connect to LLMs....
$13.71 AUD, inc GST

RM2 Wireless Module for Yukon

Brand: Pimoroni
Add 2.4GHz wireless and Bluetooth connectivity to your Yukon project....
$25.15 AUD, inc GST

CAT1 SIM7600G 4G Communication and GNSS Positioning Module (Compatible with Raspberry Pi / LattePanda)

Brand: DFRobot
SIM7600G, a 4G CAT1 and GNSS positioning module, supports LTE-FDD, LTE-TDD, WCDMA, GSM, and can be used with Raspberry Pi and LattePanda SBCs for data,...
$109.89 AUD, inc GST

ZL9NSQ Wireless 3D Attitude Sensor Module for Posture Detection

Brand: DFRobot
The ZL9NSQ 3D Attitude Sensor Module, offering unparalleled accuracy for posture monitoring, gaming and entertainment device, Featuring IMU Motion Engine...
$112.45 AUD, inc GST

XBee 3 Module - U.FL Antenna

Brand: SparkFun
After years of popularity with the XBee Series 1 and XBee Series 2, we now have the XBee Series 3 which brings the best of both worlds. XBee 3 not only handles 802.15.4...
$46.20 AUD, inc GST

Grove - 433MHz Simple RF link kit (Seeed Studio)

Brand: Seeed Studio
This kit is used for one way wireless communication at a frequency of 433MHz and includes a transmitter module and a receiver module. The twig configuration...
$23.20 AUD, inc GST

SparkFun XBee 3 Wireless Kit

Brand: SparkFun
This is the SparkFun XBee 3 Wireless Kit, the perfect box full of goodies to get you started using XBees. Inside this kit you will find two XBee 3 Modules, one XBee...
$179.95 AUD, inc GST

XBee 3 Module - PCB Antenna

Brand: SparkFun
After years of popularity with the XBee Series 1 and XBee Series 2, we now have the XBee Series 3 which brings the best of both worlds. XBee 3 not only handles 802.15.4...
$42.80 AUD, inc GST

Macchina A0 OBD-II Development Module

Brand: SparkFun
The A0 in the latest in Macchina's line of OBD-II interfaces. The A0 uses the power of the ESP32 BLE and WiFi module to allow for wireless access to the OBD-II port...
$189.95 AUD, inc GST

ESP32 WiFi-BT-BLE MCU Module / ESP-WROOM-32

Brand: Espressif ESP32 & ESP8266
The ESP8266 started a small revolution by bringing WiFi to a small and cheap package that also had enough processing power and enough pins to get small things done...
$12.95 AUD, inc GST

Arduino Portenta Vision Shield

Brand: Arduino
The Portenta Vision Shield brings industry-rated features to your Arduino Portenta. This hardware add-on will let you run embedded computer vision applications, connect wirelessly or via Ethernet to the Arduino Cloud or your own infrastructure, and activate your system upon the detection of sound events.
$104.95 AUD, inc GST

BLE Link

Brand: DFRobot
Imagine developing a wearable devices, such as smart pedometer bracelet with Arduino + Android/IOS. Communication is made between device and phone via BLE (BT4.0 low engergy). By linking into star network of low power consumption, BLE achieves rapid real-time communication. Many software or hardware engineers are hoping to have such a platform that is able to do this.
$16.14 AUD, inc GST

IO Expansion Shield for Arduino (V6)

Brand: DFRobot
Our IO expansion board is evolving, the V6 IO Expansion Shield is now supporting Xbee and has colour coded pin header. It combines our popular Xbee shield with IO expansion shield(V4). It even supports SD card which provides the ultimate functional expansion for Arduino so far. As its predecessor, it supports RS485, APC220, Bluetooth , Xbee communication, servo control.
$14.99 AUD, inc GST

Makerverse LoRa-E5 Breakout

Brand: Makerverse

Long-range and low power data transmission for remote projects.

$30.60 AUD, inc GST

Arduino Nano 33 IoT

Brand: Arduino
The ease of use of a Nano board with the addition of secure IoT and BT connectivity.
$40.90 AUD, inc GST

SparkFun RFM69 Breakout (434MHz)

Brand: SparkFun
This is the SparkFun RFM69 Breakout, a small piece of tech that breaks out all the pins available on the RFM69HCW module as well as making the transceiver easy to use. The RFM69HCW is an inexpensive and versatile radio module that operates in the unlicensed ISM (Industry, Science and Medicine) radio band. It’s perfect for building inexpensive short-range wireless networks of sensors and actuators for home automation, citizen science and more.
$23.60 AUD, inc GST

Romeo BLE (Arduino Compatible Atmega 328)

Brand: DFRobot
Romeo is an All-in-One Arduino compatible microcontroller especially designed for robotics applications from DFRobot. It benefits from the Arduino open source platform, it is supported by thousands of open source codes, and can easily be expanded with your Arduino-comaptible shields. The integrated 2 way DC motor driver and wireless socket allows you to start your project immediatly without the need for an additional motor driver.
$64.61 AUD, inc GST

Dual Bipolar Stepper Motor Shield for Arduino (DRV8825)

Brand: DFRobot
Do you want to do some projects with stepper motors such as a drafting instrument, a 3D printer, an auto curtain......? As we all know, regular stepper motors are hard to drive, but with this stepper motor shield, you can easily drive 2 stepper motors via just 6 digital I/O pins
$58.36 AUD, inc GST

SparkFun MicroMod LoRa Function Board

Brand: SparkFun
The SparkFun MicroMod LoRa Function Board provides LoRA and LoRaWAN capabilities to your MicroMod project...
$68.95 AUD, inc GST

DIGITAL IR Transmitter Module(Arduino Compatible)

Brand: DFRobot
IR Transmitter Module is designed for IR communication when paired with IR receiver module.
$6.17 AUD, inc GST

nRF51822 Bluetooth Low Energy Module - MDBT40-256RV3

Brand: Adafruit
If you have a custom PCB design and you'd like to add a little Bluetooth Low Energy, this module is ultra compact and easy to use. It contains a Nordic nRF51822...
$13.80 AUD, inc GST

Digi XBee® RR Module - U.FL Antenna

Brand: SparkFun
The Digi XBee® RR Module is an embedded solution providing fast point-to-multipoint or peer-to-peer networking via an U.FL antenna (not included)...
$50.40 AUD, inc GST

RFM69HCW Wireless Transceiver - 915MHz

Brand: Core Electronics

This is the 915MHz base RFM69HCW Wireless Transceiver that is found on Sparkfuns RFM69 Breakout. The RFM69HCW is an inexpensive and versatile radio module that operates in the unlicensed ISM (Industry, Science and Medicine) band, a set of frequencies set aside for low-power, short-range, license-free radios. 

$7.65 AUD, inc GST

WiFi Module ESP-01 (ESP8266)

Brand: Core Electronics
Create powerful and flexible wireless communication in your projects with ease using the WiFi Module ESP-01. This well-known Maker module is perfect for cost-optimised projects with its compact size and reliable connectivity. Programmed via UART interface and with 1MB of flash, it allows for Micropython to be flashed quickly. Get pre-soldered header, simple WiFi communication, and programmable IO pins all in one package.
$6.35 AUD, inc GST

ESP32-S3 LR1121 LoRa Development Board with 1.54inch OLED (HF, With Battery)

Brand: Waveshare

Build your own LoRa walkie-talkie: push-to-talk, an OLED status screen and a sturdy aluminium case, with battery included.

$71.73 AUD, inc GST

DFRobot Leonardo with Xbee socket

Brand: DFRobot

DFRobot Leonardo with Xbee socket is an Arduino Leonardo variant board based on the ATmega32u4 chip. Because the ATmega32u4 handles USB directly, code libraries are available which allow the board to emulate a computer keyboard, mouse, and more using the USB-HID protocol!

$25.16 AUD, inc GST

PiicoDev Transceiver 915MHz

Brand: PiicoDev

Unlock wireless communication up to 100m with this long-range transceiver.

$20.05 AUD, inc GST

XBee USB Adapter V2

Brand: DFRobot
The XBee USB Adapter V2 is an update version from DFRobot. It features an Atmega8U2 programmed as a USB-to-serial converter, the same chip found on the Arduino Uno.
$31.52 AUD, inc GST

Edison Robot V3

Brand: Edison

More than just a robot! The Edison robot is a powerful, engaging tool for teaching kids STEM, computational thinking and computer programming in a hands-on way.

$58.31 AUD, inc GST

XBee Shield

Brand: SparkFun
Xbee radios are an awesome way to add wireless capability to your Arduino project and now it’s even easier with the XBee Shield. The shield form-factor mates directly with any dev board that has an Arduino standard footprint and equips it with wireless communication capabilities using the popular XBee module. This unit works with all XBee modules including the Series 1 and 2, standard and Pro versions.
$36.90 AUD, inc GST

Bluetooth Module (HC-06)

Brand: Core Electronics
Much like it's more well-known brother, the HC-05, the HC-06 is a transparent TX/RX pipeline Bluetooth module which allows devices to communicate via a serial connection with all of the Bluetooth specific handling taken care of by the module's software stack.
$13.52 AUD, inc GST

Bluetooth Module (HC-05)

Brand: Core Electronics
This Bluetooth Module provides a cheap, reliable TX/RX pipeline for your project using the classic Bluetooth protocol. With in-built logic level shifting it can also be used with Arduino and other 5V systems.
$13.55 AUD, inc GST

SparkFun RFM69 Breakout (915MHz)

Brand: SparkFun
This is the SparkFun RFM69 Breakout, a small piece of tech that breaks out all the pins available on the RFM69HCW module as well as making the transceiver easy to use. The RFM69HCW is an inexpensive and versatile radio module that operates in the unlicensed ISM (Industry, Science and Medicine) radio band. It’s perfect for building inexpensive short-range wireless networks of sensors and actuators for home automation, citizen science and more.
$24.10 AUD, inc GST

LoRa E5 Shield

Brand: Unexpected Maker

LoRa E5 Shield for the TinyPICO, TinyS2 & TinyS3 This shield includes an E5 LoRa module from Seeed, that works in a range of regions

$32.23 AUD, inc GST

ESP32-S3 IR Thermal Imaging Camera Module, Type-C Port (80×62 Pixels, 90° FOV)

Brand: Waveshare
ESP32-S3 IR Thermal Imaging Camera Module, Type-C Port, 80×62 Pixels, Options for 45° / 90° FOV...
$139.95 AUD, inc GST

SparkFun Thing Plus - XBee3 Micro (U.FL)

Brand: SparkFun
The XBee3 Thing Plus is an ultra capable and easy way for getting into wireless device development. The combination of XBee and Qwiic in a space conscious design...
$92.35 AUD, inc GST

Robot Driver Board (ESP32)

Brand: Waveshare
General Driver board for Robots, Based on ESP32, multi-functional, supports WIFI, Bluetooth and ESP-NOW communications, Compatible with Raspberry Pi and...
$46.05 AUD, inc GST

HopeRF 433MHz Wireless Transceiver (RFM69HWC)

Brand: Core Electronics

This is the 434MHz base RFM69HCW Wireless Transceiver that is found on our RFM69 Breakout. The RFM69HCW is an inexpensive and versatile radio module that operates in the unlicensed ISM (Industry, Science and Medicine) band, a set of frequencies set aside for low-power, short-range, license-free radios. It’s perfect for building inexpensive short-range wireless networks of sensors and actuators for home automation, citizen science and more.

$7.95 AUD, inc GST

Industrial 6-Channel ESP32-S3 WiFi Relay Module

Brand: Waveshare
Industrial 6-Channel ESP32-S3 WiFi Relay Module, Supports WiFi / Bluetooth / RS485 control, Onboard RS485 / Pico HAT interfaces, With Multiple Isolation...
$52.30 AUD, inc GST
Feedback

Please continue if you would like to leave feedback for any of these topics:

  • Website features/issues
  • Content errors/improvements
  • Missing products/categories
  • Product assignments to categories
  • Search results relevance

For all other inquiries (orders status, stock levels, etc), please contact our support team for quick assistance.

Note: click continue and a draft email will be opened to edit. If you don't have an email client on your device, then send a message via the chat icon on the bottom left of our website.

Makers love reviews as much as you do, please follow this link to review the products you have purchased.