Search results for: 'usb-a extension cable'

This extension is a Snap-In panel mount, meaning you cut your hole and snap it in - No drilling/screws required! The 30cm cable allows you to attach to your device and have a working usb extension to the external, female USB-A port.

Your cell phone charges off of USB, but can you really trust that charging station at the airport? Now you can control when to allow data in or out of your device...

Perhaps your smart phone, tablet, or even your Raspberry Pi 4, charges off of USB, but can you really trust that charging station at the airport? Now you can control when to allow data in or out of your device with this specially-designed USB cable.Voila! Your cable's data lines can now be switched on or off.

This is the USB-A Female Socket to 5-pin Terminal Block. If you need to connect to a device with a USB Jack, maybe make your own USB host connector, extension cable...

This handy USB extension cable will make it easy for you to enclose a device that has a A type (USB host) port. We think this would be most handy when...

Check out this handy MicroUSB extension cable, which will make it easy for you to enclose a device that has a B type (micro USB host) port. Great if you need to...

Check out this handy USB extension cable, which will make it easy for you to enclose a device that has a Mini-B USB type port. We think this would be most handy...

If you need to add a compact panel-mount connection but don't have the time or ability to cut a custom oval or square hole, this USB Micro B Small...

This handy USB extension cable will make it easy for you to extend your USB cable when it won't reach. The connectors are gold plated for years of reliability. Adafruit...

Need a USB-C cable that allows you to transfer data _and_ switch power? This is it!...

This panel mount USB-C extension cable enables you to more easily enclose a project that contains a USB-C port. The cable is 6" in length and includes two 14mm M3...

If you need to add a panel-mount connection but don't have the time or ability to cut a custom oval or square hole, this USB C Round Panel Mount Extension Cable...

Extend your servo's reach with this 1m Servo Extension Cable. Featuring male and female JR Style connectors, it's perfect for robotics, RC vehicles, and other DIY/Maker projects. Enjoy seamless connections and added flexibility in cable management – a must-have for any enthusiast's toolkit.

If you have a USB Type C port on your computer over here and you want to connect something over there then this extension cable will do the job right...

This encoder cable extension expands your robot’s wire routing options. Use it when your 4 pin JST XH Series encoder cable just won't reach.....

If you need to add a panel-mount connection for DC power, but don't have the time or ability to cut a custom oval or square hole, this Round Panel...

This 6-inch (150-mm), twisted cable has 22-AWG wires and female “JR”-style connectors on both ends, the same kind of connector commonly found on RC hobby servos. It can be used to make connections between devices with 0.1" 3-pin male headers, such as between RC servo controllers or RC receivers and motor controllers with an RC interface. It can also be a convenient way to connect various 3-pin sensors to a robot controller. The cable’s conductors each consist of 60 strands, making it much more flexible than standard servo cables, and the wires are twisted to reduce electromagnetic interference (EMI).

By popular demand, Adafruit now have a handy extension cord for all of Adafruit's JST-terminated battery packs (such as Adafruit's LiIon/LiPoly and 3xAAA holders). One end has a JST-PH...

By popular request - Adafruit now have a way you can turn on-and-off Lithium Polymer batteries without unplugging them. This PH2 Female/Male JST 2-pin Extension Cable...

Stretch out your servo connections with this flexible servo extension cord. It has a 3 pin shrouded "male" connection to plug your servo into and then, 30cm later...

If you need to add a panel-mount connection for telephone-interfacing projects, but don't have the time or ability to cut a custom oval or square...

This is an Ublox chip-based GPS receiver module of low power and high sensitivity that can receive 56 channels satellite signal. Compared with traditional GPS receivers...

Make your next audio input/output project in a box with this handy Panel Mount Stereo Audio Extension Cable - 1/8" / 3.5mm. OK its quite a mouthful, but its pretty...

This handy HDMI and USB Type-C Panel Mount Extension cable will make it easy to extend your project that needs both power/data over USB and has a video...

This 24-inch (600-mm), flat cable has 22-AWG wires and female “JR”-style connectors on both ends, the same kind of connector commonly found on RC hobby servos. It can be used to make connections between devices with 0.1" 3-pin male headers, such as between RC servo controllers or RC receivers and motor controllers with an RC interface. It can also be a convenient way to connect various 3-pin sensors to a robot controller.

For when you need more distance between you and your eInk display

If you need to add a compact panel-mount connection but don't have the time or ability to cut a custom oval or square hole, this USB C Small Round...

This product is a 3-in-1 cable. By itself, it can act as an extension cord for any 5.5/2.1mm DC power cable. The heavy 24 AWG wires can handle up to 5A. You can...

If you need to add a panel-mount connection but don't have the time or ability to cut a custom oval or square hole, this USB B Round Panel Mount Extension Cable...

Do you fear that your power may not be “far reaching” enough? How would another 3' work for you? Okay, so it doesn’t sound very dramatic, but sometimes an extra 3' of power cable is exactly what your project needs. Don’t hack apart a nice clean barrel jack connection just because it won’t reach, this male-to-female barrel jack extension cable will make the reach.

That new Raspberry Pi 400 computer you just got has a row of 2x20 pin headers on the right side - those are the GPIO (general purpose input/output) pins, and for those of Adafruit who like to hack electronics, they are where the real fun lies

If you have a USB Type C port on your computer over here and you want to connect something over there then this extension cable will do the job right...

This female to male DC power cable offers an easy solution for extending the length of a DC power supply.

This 24-inch (600-mm), twisted cable can be used to extend the leads of many common RC hobby servos. It has 22-AWG wires, and both the male and female cable ends are compatible with both JR- and Futaba-style connectors, allowing it to work in either system or as an adapter between systems. The cable’s conductors each consist of 60 strands, making it much more flexible than standard servo cables, and the wires are twisted to reduce electromagnetic interference (EMI).

Stretch out your servo connections with this flexible servo extension cord. It has a 3 pin shrouded "male" connection to plug your servo into and then, 50cm later...

This 12-inch (300-mm), twisted cable has 22-AWG wires and female “JR”-style connectors on both ends, the same kind of connector commonly found on RC hobby servos. It can be used to make connections between devices with 0.1" 3-pin male headers, such as between RC servo controllers or RC receivers and motor controllers with an RC interface. It can also be a convenient way to connect various 3-pin sensors to a robot controller. The cable’s conductors each consist of 60 strands, making it much more flexible than standard servo cables, and the wires are twisted to reduce electromagnetic interference (EMI).

This 12-inch (300-mm), flat cable can be used to extend the leads of many common RC hobby servos. It has 22-AWG wires, and both the male and female cable ends are compatible with both JR- and Futaba-style connectors, allowing it to work in either system or as an adapter between systems. The cable’s conductors each consist of 60 strands, making it more flexible than standard servo cables.

This 12-inch (300-mm), flat cable has 22-AWG wires and female “JR”-style connectors on both ends, the same kind of connector commonly found on RC hobby servos. It can be used to make connections between devices with 0.1" 3-pin male headers, such as between RC servo controllers or RC receivers and motor controllers with an RC interface. It can also be a convenient way to connect various 3-pin sensors to a robot controller. The cable’s conductors each consist of 60 strands, making it more flexible than standard servo cables.