Search results for: 'smd adapter'
SOT23 to DIP Adapter
Brand: Sparkfun
6 pin SOT-23 to DIP adaptor. Created to take SOT23 of various pin sizes breakout to DIP. This will work with 3-pin MOSFETs, BJTs, Voltage Regulators (SOT-23-5), and various other Micro6, Micro5, etc packages.
$2.15 AUD, inc GST
Prototyping Board - SOP8
Brand: DFRobot
This is a SOP8 to DIP8 Adapter Board. You can change the SOP8 to DIP8 packaging.So that You needn't to buy the DIP chips for prototyping specially.Just solder the SMD chips on the board and plug it into the bread board will make you convenient to do prototyping.It can be used repeatedly also.
$0.92 AUD, inc GST
SSOP to DIP Adapter 28-Pin
Brand: Sparkfun
8, 16, 20, and 28-Pin SSOP to DIP break out boards. The footprint was rotated to accommodate different width SSOP devices and can be used with any pin count up to 28 pins. Designed to be used with 0.65mm pitch devices but can also be used with 0.025" pitch devices (comes out to ~0.635mm). We’ve made these 0.635mm devices fit just fine. Can be used with packages that have a lead span of .230" up to .350". Breaks out SSOP pins to standard .6" (600mil) and .3" (300mil) DIP width to be used in any DIP socket or bread board. The 8 and 16 boards have a 300mil spacing. The 20 and 28 pin boards have 600mil spacing between the DIP pins.
$8.80 AUD, inc GST
SMD Resistor - 0805 ± 5%(500pcs)
Brand: DFRobot
Surface mount device , SMD, resistors are the most widely used electronic component. They're designed to have small metal tabs that could be directly soldered to the surface of the PCB.
$8.05 AUD, inc GST
USB Female Type A SMD Connector
Brand: Sparkfun
USB Type ‘A’ Female SMD connector. For use with any PCB that will be used with a Type A to Type A USB cable. Designed to mount to the UBW32.
$2.70 AUD, inc GST
Raspberry Pi Pico adapter for Keyboard FeatherWing
Brand: Pimoroni
This adapter was designed specifically to allow driving the Keyboard FeatherWing with a Raspberry Pi Pico. The Pico can be soldered directly to the...
$8.65 AUD, inc GST
Raspberry Pi Pico Adapter PCB for Keyboard FeatherWing
Brand: Adafruit
From the folks at Solder Party comes this adapter designed specifically to drive the Keyboard FeatherWing with a Raspberry Pi Pico. It can be easily...
$9.50 AUD, inc GST
Pololu 23201a Serial Adapter Partial Kit
Brand: Pololu
This item is the partial kit version of the 23201a serial adapter. All surface-mount components are assembled; the 0.1″ breakaway male header strip and DB9 connector are included but not soldered.
$23.45 AUD, inc GST
SWD 0.05 Pitch Connector - 10 Pin SMT Box Header
Brand: Adafruit
This 1.27mm pitch, 2x5 male SMT Box Header is the same one used on Adafruit's SWD Cable Breakout Board. The header alone is great if you want to incorporate this piece...
$3.05 AUD, inc GST
Similar matches
Makerverse MicroSD Card Adapter (3.3 and 5V compatible)
Brand: Makerverse
DIY datalogger - store mountains of data using an external Micro SD card.
$4.15 AUD, inc GST
micro:bit Edge Connector - SMD, Right Angle (40-pin)
Brand: Sparkfun
The micro:bit Edge Connector allows you to expand the capabilities of the micro:bit development platform. This version of the connector features 40, right angle...
$7.80 AUD, inc GST
JST SH Horizontal 6-Pin Connector - SMD
Brand: Sparkfun
Here is a six pin horizontal 1.0mm pitch connector. It is useful if you need something very tiny as a connection. These are not the standard JST type connectors we use on most of our boards, but are actually the much smaller JST-SH type. Check the drawing below.
$1.60 AUD, inc GST
microSD Adapter
Brand: Core Electronics
If you need to load or store large amounts of data, look no further than this 3.3V SPI microSD card module.
$1.15 AUD, inc GST
Teensy Audio Adapter Board (Rev D)
Brand: Teensy
This is the Teensy Audio Adapter Board that can be added to a Teensy 4.0 for your next audio project. The shield provides you with an easy-to-use tool to add high...
$16.40 AUD, inc GST
USB KeepAlive SMD - Pre-assembled Power Bank Adapter
Brand: The Pi Hut
Keep your power bank from auto-shutting off with this pre-assembled USB KeepAlive adapter, designed to maintain power delivery for low-current devices like microcontrollers, Raspberry Pi Pico, and other USB-powered projects.
$15.95 AUD, inc GST
JST-PH 2-Pin SMD Connector (Side Entry)
Add a power connector to your SMD PCB designs with this JST-PH 2-pin compatible connector...
$0.26 AUD, inc GST
JTAG (2x10 2.54mm) to SWD (2x5 1.27mm) Cable Adapter Board
Brand: Adafruit
This adapter board is designed for adapting a 'classic' 2x10 (0.1"/2.54mm pitch) JTAG cable to a slimmer 2x5 (0.05"/1.27mm pitch) SWD Cable. It's helpful for using...
$9.40 AUD, inc GST
FTDI Basic Breakout - 3.3V
Brand: Sparkfun
This is the newest revision of our FTDI Basic. We now use a SMD 6-pin header on the bottom, which makes it smaller and more compact. Functionality has remained the same.
$34.35 AUD, inc GST
USB-C Breakout Board (SMD)
Brand: Core Electronics
Experiment and implement USB-PD or high-speed USB with this versatile breakout.
$1.60 AUD, inc GST
JST-SH 4-Pin SMD Connector (Side Entry) - PiicoDev Compatible Connector
Add a small 4-pin connector to your SMD PCB designs with this JST-SH 4-pin compatible connector...
$0.23 AUD, inc GST
USB Mini-B SMD Connector
Brand: Sparkfun
USB Type ‘Mini-B’ Female SMD connector. This is a 5-pin Mini-B surface mount connector commonly found in MP3 players, media/disk readers, USB hubs, pretty much anything small and USB.
$3.30 AUD, inc GST
Mini SWD 0.05 Pitch Connector - 10 Pin SMT Box Header
Brand: Adafruit
Adafruit have carrying a new 1.27mm pitch 2x5 Mini SWD 0.05" Pitch Connector. It's a tinier, bite-sized version of the Box Header used on Adafruit's SWD Cable Breakout Board. Instead...
$3.45 AUD, inc GST
Surface Mount Navigation Switch
Brand: Sparkfun
Surface mount 3-way switch. These switches are commonly found on handheld devices like MP3 players. This switch allows the user to navigate using up and down selections then select by pressing the plastic piece inwards. Capable of swtiching up to 1.2VA (360mA at 3.3V and 240mA at 5V).
$2.95 AUD, inc GST
DC Barrel Power Jack/Connector (SMD)
Brand: Sparkfun
This is a common SMD barrel-type power jack for DC wall supplies. These are compatible with our DC wall supplies and have a 5mm jack, with a 2.1mm center pole diameter.
$3.60 AUD, inc GST
Makers love reviews as much as you do, please follow this link to review the products you have purchased.