Search results for: &#039;sd nand&#039;

Add speedy mega-storage in a jiffy using this 16 GB Class 10 micro-SD card

$20.11 AUD, inc GST

MicroSD Card 4GB Class 10 With Adapter

The perfect size for embedded and datalogging projects.

$11.30 AUD, inc GST

SanDisk MAX Endurance microSD Card - 64GB

Built for always-on projects that never stop reading and writing. Rated for 30,000 hours of continuous use, so your logger or Pi doesn't randomly stop working because of a worn-out card.

$99.00 AUD, inc GST

Extreme SD/MicroSD Memory Card - 64GB Class 10 - Adapter Included

Capture up to 4K UHD media on this extremely durable and fast SD/MicroSD card at speeds up to 160MB/s. The perfect card for extended use with drones, cameras or phones.

$26.40 AUD, inc GST

Adafruit SPI FLASH Breakout - W25Q64 - 64 MBit / 8 MByte

Sometimes you need a little extra storage for your microcontroller projects: for files, images, fonts, audio clips, etc. If you need lots of space, like...

$7.05 AUD, inc GST

SD Card Module

Expand your memory resources on your next project with the addition of this handy SD Card module. Supports 5V+3.3V inputs; all IOs are well marked.

$1.20 AUD, inc GST

microSD Adapter

If you need to load or store large amounts of data, look no further than this 3.3V SPI microSD card module.

$1.15 AUD, inc GST

Adafruit Micro SD SPI or SDIO Card Breakout Board - 3V ONLY!

Micro SD cards and microcontrollers go together like micro-peanutbutter-and-jelly: SD cards are inexpensive, durable, easy to find at any shop, come in many sizes and can plug into any computer using a common SD card reader. That makes them perfect for microcontroller storage and retrieval - whether it's images, fonts, GIFs, audio files, or sensor logs.

$6.40 AUD, inc GST

Converts a uSD (microSD) Card into a full sized SD Card.

SanDisk uSD to SD Adapter

$1.70 AUD, inc GST

MicroSD card breakout board+

Not just a simple breakout board, this microSD adapter goes the extra mile - designed for ease of use. Onboard 5v->3v regulator provides 150mA for power-hungry cards...

$13.20 AUD, inc GST

This simple board breaks out the pins of a microSD card connector to a 0.1″ pin spacing that is compatible with standard perfboards, solderless breadboards, and 0.1" connectors.

Breakout Board for microSD Card

Brand: Pololu

$8.30 AUD, inc GST

Transform your Raspberry Pi 5 with blazing-fast 512GB NVMe SSD storage using the M.2 HAT+ expansion board, perfect for OS installations and high-speed data applications. Experience up to 10x faster performance than SD cards while maintaining full Pi 5 compatibility.

Raspberry Pi 5 NVMe SSD Kit with M.2 HAT+ - 512GB

Brand: Raspberry Pi

$209.58 AUD, inc GST

White Shortening microSD to SD Card Adapter

This short-style white microSD adapter slides in where the SD card goes but is 11mm shorter (excluding the silver lip). This makes it stick out a lot less...

$3.50 AUD, inc GST

Argon ONE V5 - M.2 NVME Single Slot Expansion Board

Brand: Argon40

Add a single NVMe drive to your Argon One V5 case - perfect for a desktop setup!

$42.65 AUD, inc GST

SparkFun Level Shifting microSD Breakout

The SparkFun Level Shifting microSD Breakout is quite similar to the SparkFun microSD Transflash Breakout, but with the included level shifting hardware, this board allows you to utilize a microSD card at Arduino’s SD library’s top speed on a 5V system. With this small breakout board, that is not much bigger than your fingernail, adding mass storage to your project will never be easier.

$10.85 AUD, inc GST

Breakout Board for microSD Transflash

Breakout board for the microSD socket that is not much bigger than your fingernail. Compatible with the SPI interface found on any SD card, this tiny form factor was created for cell phone storage and is perfect for your next MP3 project! Board comes fully assembled and tested.

$9.90 AUD, inc GST

QSPI Flash 128M-Bit

128Mb of Serial Flash memory in an SMD SOIC-8 package

$2.80 AUD, inc GST

SSD to USB Adapter (2 pack)

Brand: UCTRONICS

These SATA to USB 3.0 cables can help you expand the functions of your Raspberry Pi or upgrade the hard drive in your laptop by adding external SSDs.

$57.45 AUD, inc GST

SD to MicroSD Extender - 23cm (9 inch) long cable

Stop fiddling with SD card sockets in the back of your latest gadget, and streeeeeeeeeetch out with an SD Card Extender. This simple, but effective device...

$13.55 AUD, inc GST

SD Card Extender - 68cm (26 inch) long cable

Stop fiddling with SD card sockets in the back of your latest gadget, and streeeeeeeeeetch out with an SD Card Extender . This simple, but effective device gives...

$15.10 AUD, inc GST

This compact board breaks out the pins of a microSD card connector necessary to interface with the card through SPI (Serial Peripheral Interface), and it...

Breakout Board for microSD Card with 3.3V Regulator and Level Shifters

Brand: Pololu

$12.60 AUD, inc GST

Add an SD slot and prototyping area in a single shield

Arduino SD Proto Shield

Brand: Arduino

$33.70 AUD, inc GST

SMT Socket - Wide SOIC-8 (200mil)

This socket is good for any SOIC/SOP Wide-body 8 pin chip in a 200mil wide body. Simply flip open the latch, insert the chip, and flip down the latch to secure it in place.

$8.65 AUD, inc GST

This is the new-released SD card V4.0 shield. It provides a storage space for your Arduino. Users can read/write SD card via Arduino's built-in SD library...

SD Card Shield V4 (Seeed Studio)

Brand: Seeed Studio

$28.60 AUD, inc GST

MicroSD Socket

Add tons of storage to your next project with this micro SD card socket. Adafruit use this part in all Adafruit's designs and it works great with any microSD ('transflash') of...

$3.45 AUD, inc GST

SD/MMC Card Breakout

With SD and MMC memory prices dropping, the time is right for mass storage and datalogging. This breakout board will allow you to breakout the SD/MMC socket to a standard .1" 10-pin header. Perfect for breadboarding and the likes. Board comes fully assembled and tested as shown.

$19.80 AUD, inc GST

microSD Sniffer

When playing with microSD, you sometimes need to view what the SPI traffic is doing, whether for hacking or debugging. The microSD Sniffer allows you to hook up an external device, such as a logic analyzer or microcontroller, to view what signals are being passed back and forth. Insert one side into a regular uSD socket and a uSD card into the on-board socket, simple as that.

$22.95 AUD, inc GST