Search results for: 'rfid sticker'
RFID/NFC Tag Adhesive (NTAG213 Chip, 13.56MHz)
Brand: Core Electronics
One circular adhesive NFC tag, perfect for low profile applications.
$1.55 AUD, inc GST
RFID/NFC Nail Stickers - 5 Pack with White LEDs
Brand: Adafruit
You're at New York's hottest cyberpunk club is Near Field Commune(ication), and it's got everything, Adabot & the Circuit Playground, Collin's wondrous, mind-blowing...
$14.55 AUD, inc GST
NFC Classic Sticker
Brand: DFRobot
NFC classic sticker (13.56MHz) is widely used in electronic locks or customer identification as well as other systems where a small and easy to carry tag is desired.
$2.80 AUD, inc GST
NFC Tag (Round)
Brand: DFRobot
NFC Tag (13.56MHz) is widely used in electronic locks or customer identification as well as other systems where a small and easy to carry tag is desired.
$3.20 AUD, inc GST
13.56MHz RFID/NFC Clear Tag - NTAG203 Chip
Brand: Adafruit
This is a clear 13.56MHz RFID/NFC Tag with an NTAG203 chip - often used for train/bus passes, information sharing, and contactless payment, but also found...
$5.15 AUD, inc GST
UHF RFID Sticker
Brand: DFRobot
Are you still looking for a UHF RFID tag for your UHF RFID reader? Try this one, this UHF tag accords with ISO 18000-6C、EPC Class1 Gen2 standard protocol. It contains 96 bit EPC space and 512 bit user space. Carrier frequency could arrive 860~960MHz. It is really a good choice to be used in Vehicle management, logistics management and people management system.
$1.70 AUD, inc GST
13.56MHz RFID/NFC Sticker - NTAG203 Tag
Brand: Adafruit
This is a blank 13.56MHz RFID/NFC Sticker with an NTAG203 chip - often used for train/bus passes, information sharing, contactless payment, but also found in other...
$5.15 AUD, inc GST
RFID/NFC Tag Blue Fob (NTAG213 Chip, 13.56MHz)
Brand: Core Electronics
One keychain-friendly NFC tag, perfect for carrying around.
$1.40 AUD, inc GST
RFID/NFC Tag Starter Pack (NTAG213 Chip, 13.56MHz) - Assorted Pack of 4
Brand: Core Electronics
A pack of four assorted NFC tags (card, fob, sticker, disk)
$6.55 AUD, inc GST
RFID Tag - Transparent MIFARE 1K (13.56 MHz)
Brand: Sparkfun
This is a basic RFID tag that functions within the MIFARE Classic 1K guidelines. You can use these for all sorts of identification and sensing applications. The tag also has 1K of data storage which can be read and written from a compatible device. Check the related products below.
$6.85 AUD, inc GST
13.56MHz RFID/NFC Sticker - 1KB
Brand: Adafruit
This is a blank 13.56MHz RFID/NFC sticker - often used for inventory uses but also wherever a sticker is desired. The tag contains a small RFID chip and an antenna...
$4.40 AUD, inc GST
13.56MHz RFID/NFC Clear Tag - 1KB
Brand: Adafruit
This is a blank 13.56MHz Classic 'laundry' tag - often used for laundry or identification but also found in other systems where a small proximity card is desired...
$4.40 AUD, inc GST
13.56MHz RFID/NFC White Tag - 1KB
Brand: Adafruit
This is a blank 13.56MHz RFID/NFC laundry tag - often used for laundry but also general tagging. The tag contains a small RFID chip and an antenna, and is passively...
$4.30 AUD, inc GST
13.56MHz RFID/NFC White Tag - NTAG203 Chip
Brand: Adafruit
This is a blank 13.56MHz RFID/NFC Tag with an NTAG203 chip - often used for train/bus passes, information sharing, contactless payment, but also found in other systems...
$5.20 AUD, inc GST
RFID/NFC Tag 25mm Coin (NTAG213 Chip, 13.56MHz)
Brand: Core Electronics
One coin-sized NFC tag, ideal for embedding in your project.
$1.45 AUD, inc GST
RFID/NFC Tag Credit Card-Sized (NTAG213 Chip, 13.56MHz)
Brand: Core Electronics
Enhance your DIY projects with this credit card-sized RFID/NFC tag featuring an NTAG213 chip. Perfect for creating access control systems, tracking tools, and contactless vending machines. Compatible with almost any 13.56MHz RFID/NFC reader. Carry it in your wallet for convenience.
$1.70 AUD, inc GST
RFID/NFC Tag 3x Small (NTAG213 Chip, 13.56MHz)
Brand: Core Electronics
A printable, break-apart 3UP CR80 card. Each card features a key-ring hole.
$6.30 AUD, inc GST
Micro NFC/RFID Transponder - NTAG213 13.56MHz
Brand: Adafruit
This tiny micro NFC/RFID tag is super small, and contains an NTAG213 chip plus antenna. It's super tiny, flexible and a great way to DIY an RFID or NFC device if...
$5.80 AUD, inc GST
13.56MHz RFID/NFC Black Sewable Button - NTAG213 - 24mm Diameter
Brand: Adafruit
This is a blank 13.56MHz RFID/NFC Laundry Tag Button with an NTAG213 chip - often used for laundry or garment identification, information sharing, contactless payment...
$3.60 AUD, inc GST
Grove - 125KHz RFID Reader (Seeed Studio)
Brand: Seeed Studio
The Grove-125KHz RFID Reader is a module used to read uem4100 RFID card information with two output formats: Uart and Wiegand. It has a sensitivity with...
$21.10 AUD, inc GST
13.56MHz RFID/NFC tag assortment - 1KB
Brand: Adafruit
One of each of Adafruit's favorite 13.56MHz RFID/NFC Classic 1K tags - 5 in total! Credit card size 1" diameter 'laundry' clear tag 1" diameter 'laundry' white tag Key...
$18.45 AUD, inc GST
RFID Tag - Adhesive Mifare 1K (13.56 MHz)
Brand: Sparkfun
This is a basic RFID tag that functions within the MIFARE Classic 1K guidelines. You can use these for all sorts of identification and sensing applications. The tag also has 1K of data storage which can be read and written from a compatible device.
$10.05 AUD, inc GST
SparkFun DataLogger IoT RFID Kit
Brand: Sparkfun
Embark on a Journey of RFID Exploration with the SparkFun DataLogger IoT RFID Kit...
$114.95 AUD, inc GST
RFID USB Reader
Brand: Sparkfun
The RFID USB Reader is a simple to use, USB to serial base unit for the ID-3LA, ID-12LA, and ID-20LA readers. Simply plug a reader into the headers and attach a miniUSB cable. Open a terminal program of your choice at 9600bps 8N1, then scan your 125kHz ID tag and the unique 32-bit ID will be shown on the screen. The unit is based on a FTDI chip and comes with a read LED and buzzer.
$49.65 AUD, inc GST
Adafruit ST25DV16K I2C RFID EEPROM Breakout - STEMMA QT / Qwiic
Brand: Adafruit
This RFID tag is really unique: it works with mobile phones just like other RFID tags, but you can reprogram it over I2C!
$7.20 AUD, inc GST
RFID Reader Breakout
Brand: Sparkfun
This is a simple breakout board for our RFID readers. The RFID Reader Breakout converts the 2mm pins to bread board friendly 0.1" headers. With this ability the ID-3LA, ID-12LA, and the ID-20LA you can solder the reader directly to the breakout board or use the 2mm sockets.
$6.80 AUD, inc GST
Pin Map Sticker for ATMEGA328 with Optiboot
Brand: Sparkfun
This is a sticker sized to the ATMEGA328 IC with the pinout printed on top...
$1.80 AUD, inc GST
SparkFun RFID USB-C Reader
Brand: Sparkfun
The SparkFun RFID USB-C Reader provides a streamlined solution for reading low-frequency RFID tags. This user-friendly breakout board, featuring a USB-C...
$44.50 AUD, inc GST
Similar matches
PiicoDev RFID Module (NFC 13.56MHz)
Brand: PiicoDev
Read (and write) RFID/NFC tags with this compact module.
$11.45 AUD, inc GST
NFC HAT for Raspberry Pi (PN532)
Brand: Waveshare
This is a Raspberry Pi NFC HAT based on PN532 operating in the 13.56MHz frequency range. It supports three communication interfaces: I2C, SPI, and UART.
$29.20 AUD, inc GST
NFC Antenna (Seeed Studio)
Brand: Seeed Studio
NFC Antenna is a 13.56MHz antenna for Near Field Communication (NFC). It has a IPX/U.FL connector and can be used by NFC Shield V2, Xadow NFC and Grove...
$6.10 AUD, inc GST
Qwiic Micro Dynamic NFC/RFID Tag
Brand: Sparkfun
The STMicroelectronics ST25DV _**dynamic**_ Near Frequency Communication / Radio Frequency Identification tag ICs are awesome! The ST25DV64KC offers 64-kBi...
$17.65 AUD, inc GST
SparkFun Qwiic Dynamic NFC/RFID Tag
Brand: Sparkfun
The SparkFun Qwiic Dynamic NFC/RFID Tag is an advanced IC that lets you easily add dynamic NFC/RFID functionality to your projects. With its Qwiic connectors, it's a snap to get started. Perfect for makers looking to add new levels of interactivity to their projects!
$19.80 AUD, inc GST
Arduino Compatible RFID Read and Write Module
This RFID module allows you to both read and write MiFare-Type RFID cards. Create your own contactless security lock. Include one credit-card style tag and one key-fob style tag.
$27.10 AUD, inc GST
PN532 NFC/RFID controller breakout board - v1.6
Brand: Adafruit
The PN532 is the most popular NFC chip, and is what is embedded in pretty much every phone or device that does NFC. It can pretty much do it all, such as read and...
$75.90 AUD, inc GST
SparkFun Simultaneous RFID Reader - M7E Hecto
Brand: Sparkfun
The SparkFun M7E Hecto Simultaneous RFID Reader simplifies reading UHF RFID tags (EPCglobal Gen 2) with its powerful M7E-HECTO module by JADAK...
$524.95 AUD, inc GST
RFID Tag (125kHz)
Brand: Sparkfun
You might know RFID as the technology that Big Brother uses to track your every move. Quickly, don the tinfoil hats!!
$4.75 AUD, inc GST
Holographic RFID Blocking Card Holders (10-pack)
Brand: Adafruit
These Holographic Vertical RFID Blocking Card Sleeves keep all your RFID-enabled cards (i.e. credit cards, bank cards, photo IDs,...
$6.95 AUD, inc GST
13.56MHz RFID/NFC Clear Keychain Fob - 1KB
Brand: Adafruit
This is a blank 13.56MHz RFID/NFC keychain fob - often used for keys but also an easy way to tag something. The tag contains a small RFID chip and an antenna, and...
$4.55 AUD, inc GST
RFID Button - 16mm (125kHz)
Brand: Sparkfun
This is a simple, thumbnail-size RFID tag. These tags are great for sensing presence, identification, etc., and they’re small, so they can be easily sewn into clothing or inserted into enclosures. Each tag comes with a unique 32-bit ID code and is not reprogrammable. The carrier frequency of this tag is 125kHz, so it works great with our ID-2, ID-12 and ID-20 RFID readers.
$8.30 AUD, inc GST
Makers love reviews as much as you do, please follow this link to review the products you have purchased.