Search results for: &#039;printed circuit board&#039;

Once you are happy with your breadboard project, lock it down on this smaller protoboard and make it a bit more permanent.

$1.35 AUD, inc GST

Rapidly prototype custom circuits by milling traces and through-holes on your CNC mill. The 1.5mm thick FR4 substrate provides a rigid, stable base with copper cladding optimised for desktop CNC isolation routing.

$2.40 AUD, inc GST

Universal Proto-board PCBs 2cm x 8cm - 3 Pack

Here's a handy 3-pack of 2cm x 8cm Proto-board PCBs in Adafruit Black. Both sides have a black silkscreen with some row/column markings. Note that these don't have any traces between the PCB holes, you would normally bend over a thru-hole lead to create connections. They're also good for just plain mechanical work because they are made of strong FR4.

$5.60 AUD, inc GST

Universal Proto-Board PCBs 5cm x 7cm - 3 Pack

Here's a handy 3-pack of 5cm x 7cm Proto-board PCBs in Adafruit Black. Both sides have a black silkscreen with some row/column markings. Note that these don't have any traces between the PCB holes, you would normally bend over a thru-hole lead to create connections. They're also good for just plain mechanical work because they are made of strong FR4

$8.25 AUD, inc GST

Universal Proto-board PCB 6cm x 8cm - 2mm pitch

Here's a handy 6cm x 8cm Proto-board PCB that is meant for use with 2mm pitch parts - like maybe an XBee. Both sides have a green silkscreen with some...

$4.70 AUD, inc GST

Adafruit Perma-Proto Half-sized Breadboard PCB - 3 Pack!

Customers have asked Adafruit to carry basic perf-board, but Adafruit never liked the look of most basic perf: its always crummy quality, with pads that flake off and no labeling...

$25.40 AUD, inc GST

Double-Sided PCB Blank (100x150mm)

Brand: Makera

$2.50 AUD, inc GST

NeoPixel Mini PCB - Pack of 5

These are the smallest NeoPixel breakouts around! Tiny, bright RGB pixels to your project. These little PCBs are only 8mm x 10mm and have two sets of three pads...

$9.20 AUD, inc GST

SMT Breakout PCB for SOIC-16 or TSSOP-16 - 3 Pack!

Beguiled by a fancy new chip that is only available in a SOIC or (T)SSOP pinout? This breakout PCB set will make your life much much easier and get you prototyping...

$7.70 AUD, inc GST

Single-Sided PCB Blank (150x200mm)

Brand: Makera

$3.15 AUD, inc GST

Solder-able Breadboard

This is the Solderable Breadboard. A bare PCB that is the exact size as our regular breadboard (approx. 55mm x 80mm) with the same connections to pins and power rails. This board is especially useful for preserving a prototype or experiment you just created on a solderless breadboard by soldering all the pieces in place.

$13.05 AUD, inc GST

Adafruit Perma-Proto Mint Tin Size Breadboard PCB

Making a project that will fit into a "Altoids" Mint Tin? Put down that PCB shear and pick up a Perma-Proto in the new exciting minty shape!

$11.70 AUD, inc GST

Adafruit Flex Perma-Proto - Half-sized Breadboard Flex-PCB

Make your next project super-flexy with a prototyping board that can twist and bend. Adafruit took Adafruit's lovely classic perma-proto design and had it made from incredibly...

$12.90 AUD, inc GST

Out of stock

Adafruit Swirly Aluminum Mounting Grid for 0.1" Spaced PCBs

With most of our dev boards, sensors and feathers now sporting plug-and-play stemma QT ports it can be very fast to put together projects with half a...

$11.45 AUD, inc GST

smôl 100mm 16-way Flexible Printed Circuit

This is the 100mm 16-way 0.5mm-pitch Flexible Printed Circuit used to interconnect smôl boards end to end. *** _**smôl** is an ecosystem of miniatu...

$6.40 AUD, inc GST

smôl 36mm 16-way Flexible Printed Circuit Z-shaped 18mm

This is the 36mm 16-way 0.5mm-pitch Flexible Printed Circuit used to interconnect smôl boards side by side. This FPC has an offset (step) of 18mm. ***...

$4.40 AUD, inc GST

Solder-able Breadboard - Large

This is the Large Solder-able Breadboard. A bare PCB that is the exact size as our full-size breadboard with the same connections to pins and power rails. This board is especially useful for preserving a prototype or experiment you just created on a solderless breadboard by soldering all the pieces in place.

$24.80 AUD, inc GST

Adafruit Swirly Aluminum Mounting Grid for 0.1" Spaced PCBs - 2x10

With most of our dev boards, sensors and feathers now sporting plug-and-play stemma QT ports it can be very fast to put together projects with half a...

$7.95 AUD, inc GST

Adafruit Swirly Aluminum Mounting Grid for 0.1" Spaced PCBs - 10x10

With most of our dev boards, sensors and feathers now sporting plug-and-play stemma QT ports it can be very fast to put together projects with half a...

$17.70 AUD, inc GST

Adafruit Perma-Proto Quarter-sized Breadboard PCB - 3 Pack!

Customers have asked Adafruit to carry basic perf-board, but Adafruit never liked the look of most basic perf: its always crummy quality, with pads that flake off and no labeling...

$17.05 AUD, inc GST

Out of stock

Adafruit Perma-Proto Full-sized Breadboard PCB - 3 Pack!

Customers have asked Adafruit to carry basic perf-board, but Adafruit never liked the look of most basic perf: its always crummy quality, with pads that flake off and no labeling...

$40.65 AUD, inc GST

Double-Sided PCB Blank (150x200mm)

Brand: Makera

Rapidly prototype custom circuits by milling traces and through-holes on your CNC mill. The 1.5mm thick FR4 substrate provides a rigid, stable base with double-sided copper cladding optimised for desktop CNC isolation routing.

$3.35 AUD, inc GST

Adafruit Perma-Proto 40-Pin Raspberry Pi Breadboard PCB Kit - with 2x20 Header

We put a PermaProto full-sized proto board in a blender with a Pi Cobbler and out emerged this very tasty confection - the 40-Pin PermaProto for Pi! It has the Cobbler...

$16.10 AUD, inc GST

Adafruit Perma-Proto 40-Pin Raspberry Pi Half-Size PCB Kit - with 2x20 Header

We put a PermaProto half-sized proto board in a blender with a Pi Cobbler and out emerged this very tasty confection - the 40-Pin PermaProto for Pi! It has the Cobbler...

$12.10 AUD, inc GST

Out of stock

Solder-Wick Desolder Braid 2mm-5ft (8035)

Soder-Wick®, the world's leading brand of desoldering braid, is the fastest, cleanest and safest braid in the industry. It significantly reduces rework/repair time...

$6.30 AUD, inc GST

This is 40 Pin 2.54 mm Single Row Pin Header Strip. It is great for our FIO and custom PCBs or general custom headers.

10 Pcs 40 Pin Headers - Straight

Brand: DFRobot

$4.59 AUD, inc GST

IPA Technical Grade, 99.997%, Isopropyl/Rubbing Alcohol 1 Litre

This Isopropyl Alcohol (IPA) contains 99.997% Isopropyl alcohol and is perfect for cleaning all electronics and PCB materials.

$18.10 AUD, inc GST

Professional Desktop PCB Holder

This fancy and ultra-adjustable PCB holder was recommended to Adafruit by Collin, who is not only a master at soldering but also has impeccable taste in furnishings, so...

$31.25 AUD, inc GST