Search results for: 'pimoroni'

This DRV2605L haptic driver breakout with linear actuator will really get you buzzing! The powerful haptic buzz is programmable with a range of built-in patterns, or you can program your own.

This SHIM provides a convenient way of powering your Raspberry Pi Pico from a LiPo/LiIon battery. You can recharge the battery easily by providing power to the Pico's USB port.

Make your Raspberry Pi seriously cool with Fan SHIM! This 30mm no-solder, controllable CPU fan with RGB LED and tactile switch will give your Raspberry Pi significantly better thermal performance.

A conveniently sized, labelled proto-board add-on for your Raspberry Pi Pico, perfect for permanently attaching your custom circuits!

A top of the line Pirate-brand RP2350-powered microcontroller with 16MB of flash storage, 8MB of PSRAM, USB-C, Qw/ST and built in LiPo charging....

Pibow Coupé 4. The slim, hackable, and attractive case for the Raspberry Pi 4!

Take control of and monitor your world with our ultimate jack-of-all-trades Raspberry Pi HAT!

A super-simple, slimline way to hook up a 3W speaker to your Raspberry Pi! Output punchy digital I2S audio whilst leaving your GPIO pins conveniently accessible.

A postage stamp sized RP2350 development board with a USB-C connection, perfect for portable projects, wearables, and embedding into stuff...

A top of the line Pirate-brand RP2350 microcontroller with 16MB of flash memory, 8MB of PSRAM, USB-C, Qw/ST and debug connectors...

Add a tiny yet convenient power switch to your Pi with Pimoroni's On-Off SHIM! Pimoroni's SHIMs (Shove Hardware in the Middle) are a new range of boards designed...

A really nice environmental sensor that's ideal for indoor monitoring of temperature, pressure, and humidity, or even outdoors in a suitable enclosure. It's Raspberry Pi and Arduino-compatible.

A top of the line Pirate-brand RP2040-powered microcontroller with lots of flash memory, USB-C, STEMMA QT/Qwiic and debug connectors... and built in LiPo charging!

A high-resolution 8", 1024x768, HDMI display, with Pimoroni-made display driver board and keypad, that's perfect for building into projects like arcade cabinets, or just use it as a handy display for your Raspberry Pi!

This handy dandy Arcade Parts Kit has all the components you need to build your own DIY arcade machine: joystick, ten buttons, and wiring loom. Just add a Picade X HAT or Player X USB as the controller.

The Pimoroni Blinkt! is a “shield” for the Raspberry Pi, equipped with eight super-bright and addressable RGB LEDs that make it ideal for adding visual notifications...

This wiring loom has all the cables and connectors you'll need to connect a joystick, arcade buttons, and illuminated button to Picade X HAT.

An all-singing, all-dancing time of flight distance sensor that uses PEW PEW LASERS (low-powered ones), our VL53L1X breakout is easy to use with Raspberry Pi or Arduino alike!

HyperPixel 4.0 is the perfect way to use your Pi without a bunch of cables or a bulky display. Design your own interface to control your project, display data, or turn your Pi into a tiny media center.

Your new RP2350-powered, connected desktop companion! Features a 4" square touchscreen, elegant black aluminium stand and RGB backlighting....

An electronic adventure playground for physical computing, built around the RP2350 chip. Includes a 2.8" LCD screen, a speaker, a mini breadboard, and...

This diffuser will give your pHAT lovely bokeh!

Over one hundred RGB LEDs, all individually-controllable, and four tactile buttons. It's the ultimate pocket-sized rainbow generator for Raspberry Pi!

Inky wHAT is a 400x300 pixel electronic paper (ePaper / eInk / EPD) display for Raspberry Pi

The tiny little LiPo/LiIon power supply shim for all versions of the Raspberry Pi!

Sense the world around you with enviro:bit! It's loaded with sensors for air and weather, colour and light, and sound, and slots right onto your micro:bit.

A fast and precise environmental sensor that can measure temperature, pressure, and altitude. Our BMP280 breakout is Raspberry-Pi and Arduino-compatible.

This fancy optical flow sensor detects the motion of surfaces in front of it, from ~80mm to infinity! It's great for DIY drone builds, and it's compatible with Pimoroni's new Breakout Garden HAT with SPI.

Protect your Pi Zero W in style with the Pibow Zero W case, in beautiful berry colours - red, purple, and blue!

Crisp, high-res, with great viewing angles (IPS), this 1.3" square, 240x240 pixel, colour LCD will add some pizzazz to your Raspberry Pi or Arduino projects.

A really sophisticated and accurate colour and luminance sensor breakout that's Raspberry Pi and Arduino compatible. As well as detecting RGB colour and light level, it has added bells and whistles like 50/60Hz light noise rejection, a wide detection range, and two illumination LEDs.

A high-power modular robotics and engineering platform, built around RP2040 and designed to drive the most ambitious robots, props and devices...

Your new RP2350-powered, connected desktop companion! Features a 4" square touchscreen, elegant black aluminium stand and RGB backlighting....

Inky wHAT is a 400x300 pixel electronic paper (ePaper / eInk / EPD) display for Raspberry Pi

28 tiny RGB LED pixels in a single row that just slip right onto your Pi's pins, no soldering required! LED SHIM is ideal for status updates, notifications, a VU meter, or as a bar graph for sensor readings.

The easiest way to use breakouts with your Raspberry Pi. There's no soldering required, just pop up to three Pimoroni breakouts into the slots on Breakout Garden pHAT and get started coding and creating.

Now with SPI! The easiest way to use breakouts with your Raspberry Pi. There's no soldering required, just pop up to three Pimoroni breakouts (2xI2C, 1xSPI) into the slots on Breakout Garden Mini and get started coding and creating.

Mote pHAT lets you run Pimoroni's beautiful Mote lights straight from your Pi or Pi Zero, for a super-compact setup. Connect up to 4 Mote light strips, with Pimoroni's Mote cables, to the 4 channels provided and away you go! That's up to 64 pixels.

Pinbetween gives you access to all of the micro:bit's pins at the same time as using an edge-connector add-on, and it's completely solderless!