empowering creative people

Raspberry Pi > Displays

Pimoroni HDMI 8" LCD Screen Kit (1024x768)

SKU: CE05754

$113.95 AUD, inc GST
$103.59 AUD, exc GST

More Views

Pimoroni HDMI 8" LCD Screen Kit (1024x768)
113.95 AUD

SKU: CE05754

$113.95 AUD, inc GST
$103.59 AUD, exc GST

Shipping:

  • $6.95 Standard (2-4 days, tracked)
  • $9.95 Express (Overnight*, tracked)
  • $3 Economy Post* (3-7 days, no tracking)
  • FREE Pickup (Newcastle only)

Shipping costs may increase for heavy products or large orders.

Exact shipping can be calculated on the view cart page.

*Conditions apply, see shipping tab below.

A high-resolution 8", IPS, 1024x768, HDMI display, with Pimoroni-made display driver board and keypad, that's perfect for building into projects like arcade cabinets, or just use it as a handy display for your Raspberry Pi!

This new 8" display is a step up from Pimoroni's previous one, with a higher-resolution 1024x768 IPS screen, and a display driver board and keypad designed and made by Pimoroni. It's the same, good old 4:3 aspect ratio, making it ideal for retro gaming builds.

There's even a little keypad (and cable) included to control the display and navigate the menu options, and Pimoroni has broken those pins out on the board too, so you can use your own buttons if you like.

Just supply the display driver board with 5V and at least 780mA through a micro-USB cable or power supply and you're good to go!

Display Features

  • 1024x768 resolution
  • IPS, wide-viewing angle display (170°)
  • 60Hz refresh rate (12.5ms average response time)
  • Contrast ratio: 500:1 (white:black)
  • Brightness: 350 cd/m2 (nits)
  • Outer dimensions: 174x136x3mm
  • Screen area: 165x124mm
  • Weight: 125g

Display Driver Board Features

  • Pimoroni-made display driver board (HDMI>LVDS)
  • Keypad and controllable backlight brightness, contrast, and saturation
  • HDMI input
  • Power supply: 5V, 780mA
  • Driver board dimensions: 65x56.5x8.5mm
  • Keypad dimensions: 56x13.5x4.25mm
  • Keypad ribbon cable length: 20cm

This product is listed in:

Documentation and Resources:
Educational Workshops
  • Raspberry Pi Workshop for Beginners
  • Welcome to the Raspberry Pi Workshop for Beginners! Here you'll be able to follow along with our series of bite-sized videos that cover everything you'll need to know to get started with your Raspberry Pi, and start making awesome projects. My name...
  • Rain Gauge Data Logger
  • Summary A Raspberry Pi 3B is used to collect digital counts from an electronic rain gauge (1mm of rain per reed switch closure by magnetic see-saw). It has been running without issues for over 12 months. A UPS powers the Pi so it is immune from short power glitches. The total count is displayed on an LCD screen with reset and inc/dec test buttons. “To HTML” and “To LCD” routines are also included to simp...
  • Television Media Centre
  • Introduction: I have a flat screen television that is about 7 years old that I purchased before Smart TVs were commonly available. What I wanted to achieve with My Pi project was to turn my slightly old TV into a media centre. I wanted to play music through my TV as well as play saved movies and stream internet content. It was important for me to be able to stream ABC iView and SBS On Demand as they provide a free service and ...
  • Mass SD card Image Writer
  • We've built a mass SD card writer using a Raspberry Pi 3 Model B, some USB hubs and SD card readers. This beast has enough ports to write 49 SD cards at once! At Core Electronics, sometimes logistics hang-ups mean that suppliers cannot meet our demand for pre-flashed SD cards. During these periods we have to pick up the slack by manually imaging blank SD cards we source ourselves. Of course, this is a super-tedious process, and ...
  • Raspberry Pi IoT Doorbell
  • This Raspberry Pi, IoT Doorbell is basically a simple smart Door Bell, which takes a photo of whoever rings it, and emails it to the specified email address, and keeps all the photos in a folder. (along with going Ding-Dong). Any Problems, just leave a comment/start a discussion below....
  • Raspberry Pi OSMC - Custom Media Center
  • I wanted to upgrade my media center (RPi B+ with Xbian) to something a bit nicer, more stable and more accessible than just the RPi in a basic plastic case.

Product Comments

Exact shipping can be calculated on the view cart page (no login required).

We deliver Australia-wide with these options:

  • $3 for Small Items (3-7 days, not tracked, only available on selected small items)
  • $6.95 for Standard Post (2-4 days, tracked)
  • $9.95 for Express Post (Overnight for most of Australia, 2+ days for rural, tracked)
  • Pickup - Free! Only available to customers who live in the Newcastle region (only after we email you to notify your order is ready)

International Orders - the following rates are for New Zealand and will vary for other countries:

  • $11.49 for Pack and Track (3+ days, tracked)
  • $16.50 for Express International (2-5 days, tracked)

If you order lots of gear, the postage amount might increment based on the weight of your order.

Our physical address (here's a PDF which includes other key business details):

Unit 18, 132 Garden Grove Parade
Adamstown
NSW, 2289
Australia

Take a look at our customer service page if you have other questions such as "do we do purchase orders" (yes!) or "are prices GST inclusive" (yes they are!). We're here to help - get in touch with us to talk shop.

Have a product question? We're here to help!