Search results for: 'male to female'

ZipWire™ provides a convenient way to connect the signals in your projects. The wires can be unzipped for individual wires as needed. The color-coding can be used to organize power, ground and other signal types to keep your circuit organized. The rainbow-colored ribbon cable provides the 10 standard electrical colors. Each ZipWire ribbon provides 40 wires, four of each color.

Unplugging USB devices just to remove power is a thing of the past with this handy little microUSB extender.

Totally 220 pieces, this JST-PH Connector Kit is a must-have for your workstation. You'll have enough sockets and plugs to fuel your maker tendencies for days on...

This is a basic SMA male to female connector cable at 25cm in length and RG174 housing...

This handy USB extension cable will make it easy for you to enclose a device that has a A type (USB host) port. We think this would be most handy when putting a...

These hexagonal male-female aluminum standoffs are intended specifically for use with the Raspberry Pi. They keep parts spaced 18.6 mm apart, which is...

USB Type-C Male To USB-A Female Adapter...

This is a basic SMA (Sub-Miniature A) male to female connector cable. Each cable is 25cm (9.8") long and has a 50Ω impedance that can handle frequencies up to 17 GHz. The SMA connectors at each end are small enough for most consumer GPS, cellular, and other RF applications and they use a threaded housing to create strong mechanical connections.

This RF adapter bit is great for anyone doing RF work. Depending on the dev-board and antenna you have, you may be faced with either RP-SMA or SMA connectors. Unfortunately...

A USB 2.0 extension cable designed to achieve distances up to 5m

This is a basic SMA male to female connector cable at 1M in length and RG174 housing...

Type-C extension cable specially selected for Unihiker, suitable for compact project production...

This 10m (33') SMA extension does a great job of connecting your receiver or radio to a distant antenna with as little RF loss as possible...

This connector pack comes with five 3.5mm (MH-FC) bullet connectors and five 3.5mm (MH-FC) connectors. These are the same connectors as.....

Check out this handy USB extension cable, which will make it easy for you to enclose a device that has a Mini-B USB type port. We think this would be most handy...

This is a basic RP-SMA male to female connector cable at 1M in length and RG174 housing...

This Adapter allows you to run devices and cables with the classic USB Type A connector off a device or adapter with a USB Type C port...

This is an adapter that converts an RP-SMA board to an SMA antenna. The adapter will connect to any of our 2.4GHz wireless boards (Bluetooth, Nordic, or XBee) or interface cables and will allow you to use an antenna/cable with an SMA connection.

This is a basic RP-SMA male to female connector cable at 25cm in length and RG174 housing...

This M12 to RJ45 Ethernet adapter uses M12 male 4 pin D coded with IP67 waterproof rating, which is impervious to dust and short-term soaking, safe and...

N-type to SMARS Cable to connect LoRa Gateway to Fibreglass antenna and extend the coverage...

The 20cm IPEX4 to SMA Adapter Cable is designed for LattePanda SBCs wireless communication. Features high-quality, stable signal transmission and...

This handy USB extension cable will make it easy for you to enclose a device that has a B type port. We think this would be most handy when putting an Arduino in...

These are generic connectors similar to the popular Deans Ultra Plug connectors. They are sold as matching male-female pairs and have a current rating of 50 A. They are the smallest high-current connectors Pololu know of, and they are great for projects that involve bigger motors and controllers, such as Pololu's Simple Motor Controllers and high-power motor drivers.

Power your DIY projects effortlessly with the Anderson to Female Automotive Socket (16AWG). Ideal for car devices, camping, and solar setups – connect, charge, and go!

This is a basic RP-SMA male to female connector cable at 10M in length and RG58 housing...

This handy USB extension cable will make it easy for you to enclose a device that has a micro-B type port. We think this would be most handy when putting an Arduino...

This DB9 Male to RJ45 Female Adapter can be used to handle serial data communication between RS232 devices with one RJ45 network cable, or as an extender...

This 6-pin connector and plug set is great when you need to create a robust connection for signal or power. This product consists of two separate parts, the panel-mount jack and the mating plug. The plug has a ring which screws to the panel-mount connector ensuring a solid connection that won’t pull off.

These are high-current XT60 connectors commonly used in the RC hobby industry. They are sold as matching male-female pairs and are great for projects that involve bigger motors and controllers, such as Pololu's high-power motor drivers and Simple Motor Controllers.

This 12-inch (300-mm), flat Y-cable is typically used to connect two servos to a single servo port . It has 22-AWG wires terminated on one end by a “JR”-style female connector and on the other by two Futaba J male connectors, allowing it to work in either system or as an adapter between systems. The split occurs close to the cable’s JR input, so the two male ends can be separated by up to approximately 18" (450 mm). The cable’s conductors each consist of 60 strands, making it more flexible than standard servo cables.

This Male-to-Female 8mm REX™ CV Joint offers positive drive at variable angles. A constant-velocity (CV) joint allows you to create a drive.....

These are high-current XT60 connectors commonly used in the RC hobby industry. They are sold as matching male-female pairs and are great for projects that involve bigger motors and controllers, such as Pololu's high-power motor drivers and Simple Motor Controllers.

These sew-on fabric snaps are the same size used on the LilyPad SimpleSnap boards. You can sew these into your project to allow for easy removal or prototyping. They are 8mm snaps, which is equivalent to a size #1/0 at your local fabric shop.

This DB15 Male to RJ45 Female Adapter can be used to handle data communication between VGA devices with one RJ45 network cable, or as an extender to...

RF cables are required when connecting RF Explorer to other instruments or devices. This 50cm cable is good for any frequency up to 3GHz, and can fit RF...

N-type to SMARS Cable to connect LoRa Gateway to Fibreglass antenna and extend the coverage...