Search results for: &#039;qwiic to female&#039;

PiicoDev Expansion Board for Pico (Non-Recharging)

Brand: PiicoDev

Start experimenting with high-tech sensors and modules with Raspberry Pi Pico/RP2040. Use the on-board PiicoDev connector to quickly and easily connect with the PiicoDev family of sensor modules without soldering.

$5.90 AUD, inc GST

JST SH 4-Pin Cable - Qwiic Compatible - 100mm Long

This 4-wire cable is a little over 100mm / 4" long and fitted with JST-SH female 4-pin connectors on both ends. Compared with the chunkier JST-PH these are 1mm pitch...

$1.90 AUD, inc GST

STEMMA QT / Qwiic JST SH 4-Pin Cable - 400mm long

This 4-wire cable is a little over 400mm / 15.7" long and fitted with JST-SH female 4-pin connectors on both ends. Compared with the chunkier JST-PH...

$3.25 AUD, inc GST

STEMMA QT / Qwiic JST SH 4-Pin Cable - 300mm long

This 4-wire cable is a little over 300mm / 11.8" long and fitted with JST-SH female 4-pin connectors on both ends. Compared with the chunkier JST-PH...

$2.80 AUD, inc GST

Female-Female 2.54 to 2.0mm Jumper Wires x 40

These jumper wires come with a twist! Instead of going from 0.1"/2.54mm pitch headers to breadboard or something like that, these are 2.54mm to 2.0mm! Handy for...

$16.25 AUD, inc GST

Breakout for JST SH-Style Connector, 4-Pin Male Side-Entry (2-Pack)

These simple boards serve as adapters between a JST SH-style 4-pin male connector and breadboard-compatible 0.1"-pitch through holes.

$3.20 AUD, inc GST

SparkFun Qwiic HAT for Raspberry Pi

The SparkFun Qwiic HAT for Raspberry Pi is the quickest and easiest way to enter into SparkFun’s Qwiic ecosystem while still using that Raspberry Pi that you’ve...

$11.20 AUD, inc GST

SparkFun MicroMod ATP Carrier Board

Access all the pins (i.e. ATP) of the MicroMod Processor Boards with the SparkFun MicroMod ATP Carrier Board! This board breaks out the MicroMod Processor Board's...

$35.85 AUD, inc GST

SparkFun Qwiic Shield for Arduino Nano

The SparkFun Qwiic Shield for Arduino Nano provides you with a quick and easy way to enter into SparkFun's Qwiic ecosystem with your Arduino Nano board. The Qwiic...

$9.70 AUD, inc GST

Similar matches

Female Header Pins 2.54mm (1x20)

Perfect for prototyping, these straight female headers are a super common header type so grab a few and put your ideas to the test!

$0.41 AUD, inc GST

JST SH 4-Pin to Premium Male Headers Cable - Qwiic Compatible - 150mm Long

This 4-wire cable is a little over 150mm / 6" long and fitted with JST-SH female 4-pin connectors on one end and premium Dupont male headers on the other. Compared...

$1.95 AUD, inc GST

Slim Header -Female 1x20

If stacking your boards too high is an issue check out this range of low-profile headers!

$0.72 AUD, inc GST

Slim Header -Female 1x40

If stacking your boards too high is an issue check out this range of low-profile headers!

$1.40 AUD, inc GST

Female Header 2.54mm (2x20)

Perfect for prototyping, this straight female header is a commonly used header type so grab a few and put your ideas to the test!

$0.82 AUD, inc GST

JST PH 4-Pin to Female Socket Cable - I2C STEMMA Cable - 200mm

This cable will let you turn a JST PH 4-pin cable port into 3 individual wires with high-quality 0.1" female sockets on the end. Adafruit are carrying these to match up...

$3.20 AUD, inc GST

2.54mm 1x4-Pin Straight Female Header

Four header pins in a block for a permanent prototyping connection to your breakouts and PCBs.

$0.16 AUD, inc GST

Pico/Pico W Female Header Pack

Grab a couple female headers for your Pico or Pico W!

$0.82 AUD, inc GST

2.54mm 1x6-Pin Straight Female Header

Do you have a headerless breakout module, custom PCB, or other 2.54mm-pitch connection you need a reliable set of headers for? If so, then these are the kind of headers you're after.

$0.16 AUD, inc GST

2.54mm 1x3-Pin Straight Female Header

Got some 2.54mm | 0.1" pitch through holes on your PCB you need to connect to? Here's some headers you can use.

$0.11 AUD, inc GST

2.54mm 1x3-Pin Right Female Header

Need a simple three pin connection parallel to your board? There are not many easier options than a female header such as this.

$0.16 AUD, inc GST

2.54mm 1x8-Pin Straight Female Header

This is a 1 × 8 set of 2.54mm | 0.1" separated female headers perfect for small microcontroller breakouts and similar boards to allow easy access to a row of pins

$0.22 AUD, inc GST

2.54mm 1x2-Pin Straight Female Header

These minature header blocks are perfect for when there are a couple points side-by-side you need to interface to.

$0.11 AUD, inc GST

0.100" (2.54 mm) Female Header: 2x3-Pin, Straight

This connector is a double-row, 6-pin (2×3), straight female header strip designed to match 0.1" male headers. The order quantity must be a multiple of two.

$1.70 AUD, inc GST

2.54mm 1x12-Pin Straight Female Header

A header for twelve points on a PCB in a row that you want to connect to.

$0.32 AUD, inc GST

Female Header Pack

This pack of female headers includes two 6-pin headers and two 8-pin headers. This is similar to the header kit that comes with Arduino shields except that the pins are shorter so they don’t stack. These are useful for Arduino compatible boards that don’t come with headers already installed (like the Arduino Pro).

$3.90 AUD, inc GST

JST SH-Style Cable, 2-Pin, Single-Ended Female, 30cm

This 2-conductor, 30 cm (12") cable has 28 AWG wires and a 2-pin female JST SH-type connector on one end. The other ends of the wires are unterminated;...

$1.70 AUD, inc GST

0.100" (2.54 mm) Female Header: 2x6-Pin, Straight

This connector is a double-row, 12-pin (2×6), straight female header strip designed to match 0.1" male headers.

$2.80 AUD, inc GST

2.54mm 1x40-Pin Right Female Header

This long row of headers has you covered when you have an "unconventional" free 40-pins on the edge of your PCB to interface or prototype with.

$1.05 AUD, inc GST

2.54mm 1x20-Pin Right Female Header

If you've got exactly twenty positions for pins on the edge of your board you want some female headers on to interface with, these headers have you covered.

$0.74 AUD, inc GST

USB Type A Female Breakout

This simple board breaks out a female USB type A connector’s VCC, GND, D- and D+ pins to a 0.1" pitch header. If you want to add a USB to your project, but don’t want to put up with soldering tiny connectors, this is the board for you.

$9.30 AUD, inc GST

2.54mm 1x2-Pin Right Female Header

Got two 0.1" seperated points on the edge of a board you need to connect to easily and permanently? In that case, there aren't many more simple options than a female header such as this.

$0.17 AUD, inc GST