Search results for: 'logic level converter'

This Bi-Directional Logic Level Converter is a breadboard-friendly device that converts between 5V and 3.3V logic.

Level shifting chips let you connect 3V and 5V devices together safely. This chip is similar to others in the shop (such as the 74LVC125) except this one is particularly...

Going from TTL to RS485 is made simple by this prototyping friendly module. On one side of the board are the TTL IOs, and on the other are the RS485. At the core is a MAX485 which is powered by 5V.

If you'd like to connect a board with native CAN Peripheral support, the Adafruit CAN Pal Transceiver will take the 3V logic level signals and convert...

This tiny logic level shifter features four bi-directional channels, allowing for safe and easy communication between devices operating at different logic levels. It can convert signals as low as 1.5 V to as high as 18 V and vice versa, and its four channels are enough to support most common bidirectional and unidirectional digital interfaces, including I²C, SPI, and asynchronous TTL serial.

Because the Arduino (and Basic Stamp) are 5V devices, and most modern sensors, displays, flash cards and modes are 3.3V-only, many makers find that they need to...

A nifty RS232 (DB9) to Serial converter. Comes with pre-soldered 0.1" male header pins for easy connectivity to breadboards and projects.

This current-to-voltage module can linearly convert 0~25mA current signals into 0~3V voltage signals. Industrial sensors or devices usually have the current signal output of 4~20 mA. With this current-to-voltage module, your main control board can easily attain the current signals input from industrial sensors or devices.

This 12V to 3.3V level converter module with 2-channel photoelectric isolation features common anode / common cathode / differential signal inputs. The...

This 12V to 3.3V level converter module with 4-channel photoelectric isolation features common anode / common cathode / differential signal inputs. The...

Because the Arduino (and Basic Stamp) are 5V devices, and most modern sensors, displays, flash cards and modes are 3.3V-only, many makers find that they need to...

The ‘must have’ IC for TTL/CMOS projects finally has its own breakout board! This is the RS232 converter IC that is capable of running at 3V and communicating with 5V logic.

We've been stocking WS2811-n-friends for a long time, enough to see many iterations and versions of the "one-wire-control" addressable LED...

If you're looking to interface with telco, retro or industrial equipment you'll probably run into RS-232 interfaces. The Adafruit RS232 Pal - Two...

This 12V to 5V level converter module with 4-channel photoelectric isolation features common anode / common cathode / differential signal inputs. The...

Sometimes you feel low, and sometimes you feel high - cause your logic levels are opposite what they should be! But this easy-to-use inverter chip will flip that...

The SparkFun 8 Channel Level Shifter Breakout features the TXS01018E 8-bit, bi-directional logic level translator from Texas Instruments...

This adapter helps to connect TTL (Transistor-Transistor Logic) level signals to RS232 interface.