Search results for: 'jst ph 2 pin connector'
JST PH 2-Pin Cable – Male Header 200mm
Brand: Adafruit
For a really long time Adafruit assumed that the JST PH didn't have a free-hanging male header version. But then Adafruit found this JST-PH 2-pin Male Cable, and Adafruit were like...
$1.60 AUD, inc GST
JST PH 2.0mm Pitch Connector Kit - 220 Piece Kit
Brand: Adafruit
Totally 220 pieces, this JST-PH Connector Kit is a must-have for your workstation. You'll have enough sockets and plugs to fuel your maker tendencies for days on...
$23.80 AUD, inc GST
JST-PH 2-pin Jumper Cable - 100mm long
Brand: Adafruit
This hand little 2 pin JST PH connector is perfect for all Adafruit's battery packs!
$1.90 AUD, inc GST
JST-PH 2-Pin SMD Connector (Side Entry)
Add a power connector to your SMD PCB designs with this JST-PH 2-pin compatible connector...
$0.26 AUD, inc GST
JST-PH 2 Pin Female Connector
Brand: DFRobot
This product includes 2-pin 2.0mm mating connector housing(10 units) and crimp pins (20 units).
$1.20 AUD, inc GST
2-Pin Female JST PH-Style Cable (14cm)
Brand: Pololu
This 5.5" (14cm) cable has two 26AWG conductors with a 2mm-pitch 2-pin female JST PH-style connector. The other ends of the wires are unterminated; they can be cut to length to match your application. The red and black wires are twisted together to reduce noise.
$3.20 AUD, inc GST
JST-PH Jumper 2 Wire Assembly
Brand: Sparkfun
This is a simple two wire cable. Great for jumping from board to board or just about anything else. There is a 2-pin JST connector on one end, bare cable on the opposite end. It also comes with the mating connector for the JST.
$2.20 AUD, inc GST
JST 2-pin Extension Cable with On/Off Switch - JST PH2
Brand: Adafruit
By popular request - Adafruit now have a way you can turn on-and-off Lithium Polymer batteries without unplugging them. This PH2 Female/Male JST 2-pin Extension Cable...
$6.35 AUD, inc GST
JST PH-Style Cable, 2-Pin, Female-Female, 25cm
Brand: Pololu
This 2-conductor, 25 cm (10") cable has 24 AWG wires and 2-pin female JST PH-type connectors (2mm pitch) on both ends...
$2.80 AUD, inc GST
Barrel Jack to 2-pin JST PH 2mm
Brand: Sparkfun
Two pin JST PH 2mm connector to a 2.1x 5.5mm barrel jack, 6.25 inch long jumper cable. We use this cable to adapt from a wall power supply to a relatively small, SMD JST connector. We found that many of the SMD connectors used for battery charging were too large or were not capable of through-putting the current we wanted for faster charging. This setup, with a SMD JST connector and wall power supply, can handle up to 2A!
$6.10 AUD, inc GST
JST PH-Style Cable with Female Pins for 0.1" Housings, 2-Pin, 12cm
Brand: Pololu
This 2-conductor, 12 cm (4.5") cable has 24 AWG wires and a 2-pin female JST PH-type connector (2mm pitch) on one end. The other ends of the wires are...
$2.40 AUD, inc GST
JST-PH 2-Pin SMT Right Angle Connector
Brand: Adafruit
A simple 2-pin connector that is compatible with the "JST PH 2-pin" connector - perfect for soldering to the bottom of Adafruit's 3.3V Logic Trinket and 5V Logic Trinket!...
$1.45 AUD, inc GST
Jumper Wire - JST-PH Black Red
Brand: Sparkfun
This is a simple two wire cable. Great for jumping from board to board. 2-pin JST-PH connector on one end, bare cable on the opposite end.
$1.90 AUD, inc GST
JST-PH 2-Pin SMT Right Angle Breakout Board
Brand: Adafruit
A simple 2-pin connector soldered onto a breadboard-friendly breakout. This is compatible with the "JST PH 2-pin" connector. Mates perfectly with all Adafruit's 1-cell...
$3.20 AUD, inc GST
6V Air Valve with 2-pin JST PH Connector - FA0520E
Brand: Adafruit
Here's a cool new valve for makers interested in pneumatic systems, hydraulics, inflatables, projects with compressed air, and the like. These air valves, also known by other names like, automatic bleeding valve or air release valve, are typically used to passively release air from a pressurized container.
$6.65 AUD, inc GST
Breakout for JST PH-Style Connector, 2-Pin Male Top-Entry, with SH
Brand: Pololu
This simple board serves as an adapter between a JST PH-style 2-pin, top-entry connector and breadboard-compatible 0.1"-pitch through holes. The PH...
$2.50 AUD, inc GST
Switched JST-PH 2-Pin SMT Right Angle Breakout Board
Brand: Adafruit
This switched JST connector is the best way to quickly prototype with Adafruit's LiPoly batteries. Adafruit paired a genuine JST connector with a slide switch that can do up...
$4.95 AUD, inc GST
3x AA Battery Holder with On/Off Switch and 2-Pin JST
Brand: Adafruit
Here's another addition to the growing family of AA battery holders. Behold! A holder for three (3) AA batteries! It's got a 6" long genuine JST-PH 2-pin cable connector, an On/Off switch, and, oh yes, it's in classy Adafruit black.
$7.95 AUD, inc GST
Similar matches
JST 2-pin cable
Brand: Adafruit
Red and black tinned wires with a 2-pin JST PH connector on the end. 4" / 100mm long. Matches up nicely with Adafruit's Lipoly charger! Adafruit don't have the 'mating' version...
$1.30 AUD, inc GST
4-pin JST PH to JST SH Cable - STEMMA to QT / Qwiic - 200mm long
Brand: Adafruit
Are you a maker in the midst of a STEMMA dilemma? This 200mm long 4-wire cable is a fantastic chimera-cable fitted with STEMMA QT / Sparkfun Qwiic JST SH on one...
$1.95 AUD, inc GST
JST connector Kit (2.0mm)
Brand: DFRobot
This kit includes PHR-2，PHR-3 and PHR-4 housing (20 units each)， through-hole type shrouded header （20 units each）and crimp contact (100 units).
$11.15 AUD, inc GST
JST Right-Angle Connector - Through-Hole 2-Pin
Brand: Sparkfun
This is a 2-pin, through-hole PH series JST connector. The pins are spaced by 2mm.
$1.85 AUD, inc GST
JST PH 4-Pin to Male Header Cable - I2C STEMMA Cable - 200mm
Brand: Adafruit
This cable will let you turn a JST PH 4-pin cable port into 3 individual wires with high-quality 0.1" male header plugs on the end. Adafruit are carrying these to match...
$3.30 AUD, inc GST
JST PH 4-Pin to Female Socket Cable - I2C STEMMA Cable - 200mm
Brand: Adafruit
This cable will let you turn a JST PH 4-pin cable port into 3 individual wires with high-quality 0.1" female sockets on the end. Adafruit are carrying these to match up...
$3.20 AUD, inc GST
JST PH 3-Pin Plug to Male Header Cable - 200mm
Brand: Adafruit
This cable will let you turn a JST PH 3-pin cable port into 3 individual wires with high-quality 0.1" male header plugs on the end. Adafruit are carrying these to match...
$2.60 AUD, inc GST
2.0mm Pitch 5-pin Cable Matching Pair - JST PH Compatible
Brand: Adafruit
These solid 2.0mm pitch connector cable pairs are great when you need something that can carry a couple of amps of current and are easy to connect and disconnect.
$2.25 AUD, inc GST
JST PH to Breadboard Jumper (3-pin)
Brand: Sparkfun
This is a simple jumper adapter cable that comes pre-terminated with a female JST connector on one end and a breadboard hookup pigtail on the other. This cable makes it easy to connect components with a JST connector to a breadboard or an Arduino-based device’s pins.
$2.95 AUD, inc GST
2.0mm Pitch 4-pin Cable Matching Pair - JST PH Compatible
Brand: Adafruit
These solid 2.0mm pitch connector cable pairs are great when you need something that can carry a couple of amps of current and are easy to connect and disconnect.
$2.10 AUD, inc GST
2.0mm Pitch 3-pin Cable Matching Pair - JST PH Compatible
Brand: Adafruit
These solid 2.0mm pitch connector cable pairs are great when you need something that can carry a couple of amps of current and are easy to connect and disconnect.
$2.20 AUD, inc GST
USB Type C Screw Panel Mount to 6 pin JST PH Cable
Brand: Adafruit
This panel mount cable is great for making USB Type C connections with a panel-mount setup. On the small panel-mount side you get a USB C connector, the...
$6.35 AUD, inc GST
JST PH 4-Pin Socket to Color Coded Cable - 200mm
Brand: Adafruit
This cable will let you turn a JST PH 4-pin cable socket into 4 individual tinned wires. These are great to match up with Adafruit's JST 4-PH cables, for extending and...
$2.10 AUD, inc GST
JST PH 3-Pin Socket to Color Coded Cable - 200mm
Brand: Adafruit
This cable will let you turn a JST PH 3-pin cable socket into 3 individual tinned wires. These are great to match up with Adafruit's JST 3-PH cables, for extending and...
$2.15 AUD, inc GST
JST PH 3-Pin Plug to Female Socket Cable - 200mm
Brand: Adafruit
This cable will let you turn a JST PH 3-pin cable port into 3 individual wires with high-quality 0.1" female header sockets on the end. Adafruit are carrying these to match...
$2.70 AUD, inc GST
JST PH 3-pin Plug-Plug Cable - 100mm long
Brand: Adafruit
This cable is a little over 100mm / 4" long and fitted with JST-PH 3-pin connectors on either end. Adafruit dig the solid and compact nature of these connectors and the .. read more
$1.60 AUD, inc GST
Breakout for JST PH-Style Connector, 6-Pin Male Top-Entry, with SH
Brand: Pololu
This simple board serves as an adapter between a JST PH-style 6-pin, top-entry connector and breadboard-compatible 0.1"-pitch through holes. The PH...
$3.20 AUD, inc GST
JST-PH 3 Holes Female Connector
Brand: DFRobot
This product includes 3-pin 2.0mm mating connector housing(10 units) and crimp pins (30 units).
$1.25 AUD, inc GST
JST PH-Style Cable, 6-Pin, Female-Female, 10cm
Brand: Pololu
This 6-conductor, 10 cm (4") cable has 24 AWG wires and 6-pin female JST PH-type connectors (2mm pitch) on both ends...
$5.40 AUD, inc GST
2.0mm Pitch 6-pin Cable Matching Pair - JST PH Compatible
Brand: Adafruit
These solid 2.0mm pitch connector cable pairs are great when you need something that can carry a couple of amps of current and are easy to connect and disconnect.
$2.35 AUD, inc GST
JST PH-Style Cable, 5-Pin, Female-Female, 10cm
Brand: Pololu
This 5-conductor, 10 cm (4") cable has 24 AWG wires and 5-pin female JST PH-type connectors (2mm pitch) on both ends...
$4.70 AUD, inc GST
3-Pin Female JST PH-Style Cable for Sharp Distance Sensors (30cm)
Brand: Pololu
This 12-inch (30-cm) cable has 26 AWG wires and a 3-pin female JST PH-style connector that mates with the connector on 3-pin Sharp analog distance sensors. The other ends of the wires are unterminated; they can be cut to length to match your application. The wire color scheme matches the Sharp distance sensor pinout: red for power, black for ground, and white for signal.
$3.25 AUD, inc GST
Makers love reviews as much as you do, please follow this link to review the products you have purchased.