Search results for: 'gpio pin headers'

This 2x20 “tall” header has the same number and spacing of pins as a Raspberry Pi and provides your board with the ability to extend the heights of your GPIO to...

This 2x20 shrouded header has the same number and spacing of pins as the Raspberry Pi B+ so you can easily connect via ribbon cable to the low-level peripherals and get hacking! This through-hole header has 40 0.1"-spaced pins and is keyed for polarity.

This 2x20 flat ribbon-cable fits the GPIO headers on the Raspberry Pi B+ so you can easily connect to the low-level peripherals and get hacking! This cable has 0.1"-spaced connectors and is keyed for polarity.

Perfect for prototyping, the straight male header is a super common header type so grab a few and put your ideas to the test!

This 2x20 pin female header is meant to allow you to extend the reach of any board with the standard 2x20 GPIO pin footprint like the Raspberry Pi, Google Coral...

Connect your own PCB to a Raspberry Pi with this extra-tall female header. The female header part has extra spaces to make it 13.6mm tall: when placed on your Pi...

If you already own the GPIO Hammer Headers Jig and just want some more headers, then these are the headers you are after.

This 0.1mm pitch 2x2 Female Header is the perfect boost to use with boards that use the 4-pin 'PoE' header on the Raspberry Pi 3 and 4, like the Raspberry Pi PoE HAT! It's a great pairing to the 2x20 socket riser header to get a full lift.

If you already own the GPIO Hammer Headers Jig and just want some more headers, then these are the headers you are after.

This adapter board allows you to use our range of Raspberry Pi boards with the Arduino Uno, Genuino UNO and other Arduino boards which use the same pin layout as the Uno design.

If you're after a quick and easy to way to connect external circuitry up to your Raspberry Pi, then look no further! This breakout board has a form factor perfect for connecting to breadboards using the included 40-pin ribbon cable.

That new Raspberry Pi 400 computer you just got has a row of 2x20 pin headers on the right side - those are the GPIO (general purpose input/output) pins, and for those of Adafruit who like to hack electronics, they are where the real fun lies

Extend your Raspberry Pi's functionality with this rainbow ribbon cable!

Here is an easy solution for extending your Raspberry Pi's GPIO capabilities. This is a 40-pin FPC to Straight 2x20 IDC Female Socket Header Adapter

These 40-pin 2x20 male GPIO headers can be used on a Raspberry Pi Zero and come in a multi-pack containing all 5 colours! Great for any version of...

Connect your own PCB to a Raspberry Pi with this normal-height female header. The female header part is about 8.5mm tall, good for small HATs that do not to clear...

Now at right angles! Securely attach a HAT (or two mini HATs) to your Raspberry Pi 400, so that they're pointing upwards and correctly oriented.

The Power + Relay HAT for Pi Zero is designed as an all-in-one simple automation add on for the Raspberry Pi Zero. It combines the beefy 5V 3A power...

If your soldering isn't quite up to scratch, or you just don't own a soldering iron yet, then these nifty hammer headers form Pimoroni might be just what you need...

Pixelblaze is a Wi-Fi Addressable LED Controller and Custom Pattern Editor, powered by an ESP32 module with 240Mhz dual-core processor for 'blazingly...

Connect your own PCB to a Raspberry Pi B+ and stack on top with this normal-height female header with extra long pins. The female header part is about 8.5mm tall...

The Breakout Pi Plus is a useful and versatile prototyping expansion board for the Raspberry Pi.

Simplifying Projects with Raspberry Pi Pico Small but Mighty Love the Maker Pi Pico but can't fit it into your project? Now we have the Maker Pi Pico...

The Cytron Maker Pi Pico Base is an all-in-one accessory for the Raspberry Pi Pico, offering a feature-rich learning environment for beginners and beyond!...

For super-slim SMT designs, this custom-made, 2x20 short SMT female header can be used to plug a Raspberry Pi HAT onto a B+ or A+ or Pi 2. It's harder to use than...

Connect your own PCB to a Raspberry Pi B+ with this extra-tall female header. The female header part has extra spaces to make it 16.5mm tall: when placed on your...

Add a tiny yet convenient power switch to your Pi with Pimoroni's On-Off SHIM! Pimoroni's SHIMs (Shove Hardware in the Middle) are a new range of boards designed...

This neat little board plugs directly into the Raspberry Pi GPIO header and provides 2 or 4 connectors for small stepper motors

PCIe To M.2 Adapter With PoE Function (C) For Raspberry Pi 5, Supports NVMe Protocol M.2 Solid State Drive, High-speed Reading / Writing...

Enhance your Raspberry Pi projects with this dual-access GPIO extension board, featuring both vertical and horizontal pin headers for flexible GPIO access on all 40-pin Raspberry Pi models including Pi 5, 4, and Zero.

This 'shorty' 2x20 header is great for a slim connection to your Raspberry Pi model A+ or B+, it's basically the through-hole version of the SMT GPIO Header for...

Imagine the project you've always dreamed about. Now beef it up with an incredible amount of processing power, Wi-Fi, Bluetooth and USB connectivity, plus enough extra ports to connect sensors, cameras, HDMI displays, motors, anything else you can imagine!

Fit a pHAT fiddle-free! These solderless pogo GPIO pins, nuts, bolts, and spacers make fitting a pHAT to your Pi Zero (or Zero W) super-quick and easy. Pogo-a-go-go!

Nano Base Board (B) for Raspberry Pi Compute Module 5, Same Size As The CM5...

Here is an easy solution for extending your Raspberry Pi's GPIO capabilities. This is a 40-pin FPC to Straight 2x20 IDC Male Plug Header Adapter

This is the SparkFun Pi Wedge, a small board that connects to the 40-pin GPIO connector on the Raspberry Pi and breaks the pins out to breadboard-friendly arrangement and spacing, and even adds a couple of decoupling capacitors on the power supply lines. The “Wedge” also makes the initial bring-up process easier - you can plug an FTDI Basic module into the built-in serial port. Each version of this Pi Wedge comes preassembled and can be inserted into the RPi’s GPIO port that allows you to prototype - no soldering required!

Isolated RS485 CAN HAT (B) For Raspberry Pi, 2-Ch RS485 and 1-Ch CAN, Multi Protections...