Search results for: 'gpio header pins'

Perfect for prototyping, the straight male header is a super common header type so grab a few and put your ideas to the test!

This 2x20 pin female header is meant to allow you to extend the reach of any board with the standard 2x20 GPIO pin footprint like the Raspberry Pi, Google Coral...

This 2x20 “tall” header has the same number and spacing of pins as a Raspberry Pi and provides your board with the ability to extend the heights of your GPIO to...

This 2x20 shrouded header has the same number and spacing of pins as the Raspberry Pi B+ so you can easily connect via ribbon cable to the low-level peripherals and get hacking! This through-hole header has 40 0.1"-spaced pins and is keyed for polarity.

If you already own the GPIO Hammer Headers Jig and just want some more headers, then these are the headers you are after.

Extend your Raspberry Pi's functionality with this rainbow ribbon cable!

This 0.1mm pitch 2x2 Female Header is the perfect boost to use with boards that use the 4-pin 'PoE' header on the Raspberry Pi 3 and 4, like the Raspberry Pi PoE HAT! It's a great pairing to the 2x20 socket riser header to get a full lift.

If you're after a quick and easy to way to connect external circuitry up to your Raspberry Pi, then look no further! This breakout board has a form factor perfect for connecting to breadboards using the included 40-pin ribbon cable.

That new Raspberry Pi 400 computer you just got has a row of 2x20 pin headers on the right side - those are the GPIO (general purpose input/output) pins, and for those of Adafruit who like to hack electronics, they are where the real fun lies

This adapter board allows you to use our range of Raspberry Pi boards with the Arduino Uno, Genuino UNO and other Arduino boards which use the same pin layout as the Uno design.

If you already own the GPIO Hammer Headers Jig and just want some more headers, then these are the headers you are after.

These 40-pin 2x20 male GPIO headers can be used on a Raspberry Pi Zero and come in a multi-pack containing all 5 colours! Great for any version of...

Nano Base Board (B) for Raspberry Pi Compute Module 5, Same Size As The CM5...

Connect your own PCB to a Raspberry Pi with this normal-height female header. The female header part is about 8.5mm tall, good for small HATs that do not to clear...

Connect your own PCB to a Raspberry Pi with this extra-tall female header. The female header part has extra spaces to make it 13.6mm tall: when placed on your Pi...

If your soldering isn't quite up to scratch, or you just don't own a soldering iron yet, then these nifty hammer headers form Pimoroni might be just what you need...

Connect your own PCB to a Raspberry Pi B+ and stack on top with this normal-height female header with extra long pins. The female header part is about 8.5mm tall...

This programmable module combines with a Raspberry Pi to serve as the control center of a small robot or electronics project. Its ATmega32U4 AVR microcontroller comes preloaded with an Arduino-compatible bootloader, and the board includes dual motor drivers that can deliver 1.7 A per channel to two brushed DC motors. An efficient voltage regulator (5.5 V to 36 V input) and level shifters enable it to power and communicate with a Raspberry Pi. This version (item #3119) is assembled with selected through-hole connectors and components installed for use as a Raspberry Pi add-on.

The Breakout Pi Plus is a useful and versatile prototyping expansion board for the Raspberry Pi.

The Power + Relay HAT for Pi Zero is designed as an all-in-one simple automation add on for the Raspberry Pi Zero. It combines the beefy 5V 3A power...

Connect your own PCB to a Raspberry Pi B+ with this extra-tall female header. The female header part has extra spaces to make it 16.5mm tall: when placed on your...

Add a tiny yet convenient power switch to your Pi with Pimoroni's On-Off SHIM! Pimoroni's SHIMs (Shove Hardware in the Middle) are a new range of boards designed...

Is this not the cutest little display for the Raspberry Pi? It features a 2.8" display with 320x240 16-bit color pixels and a capacitive touch overlay. That's right...

For super-slim SMT designs, this custom-made, 2x20 short SMT female header can be used to plug a Raspberry Pi HAT onto a B+ or A+ or Pi 2. It's harder to use than...

PCIe To M.2 Adapter With PoE Function (C) For Raspberry Pi 5, Supports NVMe Protocol M.2 Solid State Drive, High-speed Reading / Writing...

This neat little board plugs directly into the Raspberry Pi GPIO header and provides 2 or 4 connectors for small stepper motors

Enhance your Raspberry Pi projects with this dual-access GPIO extension board, featuring both vertical and horizontal pin headers for flexible GPIO access on all 40-pin Raspberry Pi models including Pi 5, 4, and Zero.

Imagine the project you've always dreamed about. Now beef it up with an incredible amount of processing power, Wi-Fi, Bluetooth and USB connectivity, plus enough extra ports to connect sensors, cameras, HDMI displays, motors, anything else you can imagine!

Here is an easy solution for extending your Raspberry Pi's GPIO capabilities. This is a 40-pin FPC to Straight 2x20 IDC Male Plug Header Adapter

This 'shorty' 2x20 header is great for a slim connection to your Raspberry Pi model A+ or B+, it's basically the through-hole version of the SMT GPIO Header for...

Fit a pHAT fiddle-free! These solderless pogo GPIO pins, nuts, bolts, and spacers make fitting a pHAT to your Pi Zero (or Zero W) super-quick and easy. Pogo-a-go-go!

This 2x20 flat ribbon-cable fits the GPIO headers on the Raspberry Pi B+ so you can easily connect to the low-level peripherals and get hacking! This cable has 0.1"-spaced connectors and is keyed for polarity.

We put a PermaProto full-sized proto board in a blender with a Pi Cobbler and out emerged this very tasty confection - the 40-Pin PermaProto for Pi! It has the Cobbler...

Here is an easy solution for extending your Raspberry Pi's GPIO capabilities. This is a 40-pin FPC to Right Angle 2x20 IDC Male Plug Header Adapter.

The A206 carrier board has nearly the same design and function with NVIDIA® Jetson Xavier™ NX carrier board but could work well with Jetson Nano module,...

Prototype like a pro, add automation or raise the bar in robotics: Portenta Hat Carrier makes high performance easy for you.

Isolated RS485 CAN HAT (B) For Raspberry Pi, 2-Ch RS485 and 1-Ch CAN, Multi Protections...

Simplifying Projects with Raspberry Pi Pico Small but Mighty Love the Maker Pi Pico but can't fit it into your project? Now we have the Maker Pi Pico...