Search results for: 'camera+cable'

40 results

Camera Cable Joiner/Extender for Raspberry Pi - 15-pin to 15-pin

Brand: The Pi Hut
Extend the range of your Raspberry Pi Camera Module, High Quality Camera or any other CSI camera module with this nifty cable joiner.
$6.85 AUD, inc GST

Raspberry Pi Zero FPC Camera Cable - 30cm long

Brand: Adafruit
This 30cm long camera cable is specifically designed to work with the Raspberry Pi Zero series (including Zero W and Zero WH) Just plug it into your Pi...
$7.90 AUD, inc GST

Zero Camera Cable Joiner for Raspberry Pi - 22-pin to 22-pin

Brand: The Pi Hut
Extend the range of your ZeroCam projects with this handy cable joiner.
$6.95 AUD, inc GST

Camera Cable Joiner for Raspberry Pi - 15-pin to 22-pin

Brand: The Pi Hut
Extend the range of your ZeroCam projects with this handy cable joiner.
$6.95 AUD, inc GST

Adafruit Raspberry Pi Camera Board Case with 1/4 Tripod Mount

Brand: Adafruit
This is a basic, classic Adafruit Raspberry Pi Camera Board Enclosure with a black base and a clear top. The case is as minimal as it gets, coming in just two pieces...
$5.95 AUD, inc GST

Pimoroni Picade Pan-Tilt Hat (Full Kit)

Brand: Pimoroni
Pimironi's Pan-Tilt HAT lets you mount and control one of their pan-tilt modules right on top of your Raspberry Pi. The HAT and its on-board microcontroller let you independently drive the two servos (pan and tilt), as well as driving up to 24 regular LED (with PWM control) or NeoPixel RGB (or RGBW) LEDs.
$74.95 AUD, inc GST

Raspberry Pi Wide Angle Camera Module

Brand: Waveshare
Raspberry Pi Wide Angle Camera Module is a low-cost Fisheye Lens, wider Field View,Camera module, designed for Raspberry Pi. Raspberry Pi Camera, supports...
$38.10 AUD, inc GST

Microscope stand with 0.12-1.8x lens kit for Raspberry Pi

Brand: Pimoroni
This kit has CS/C mount lens ideal for looking closely at stuff and a stage to mount it to for fine adjustment for easy focusing. Connect up a Raspberry Pi HQ camera and Raspberry Pi for a complete digital microscope station or to fully accessorise your pencil-lead carving hobby.
$274.95 AUD, inc GST

Arducam 12MP IMX477 Mini High Quality Camera Module

Brand: Arducam

Time to enjoy a smooth upgrade for your Raspberry Pi to the 12MP HQ camera!

$98.15 AUD, inc GST

The Pi Hut Raspberry Pi Zero Basic Mounting Plate for High Quality Camera

Brand: The Pi Hut
An affordable, simple solution to mounting your Raspberry Pi to your Raspberry Pi High Quality Camera.
$6.10 AUD, inc GST

The Pi Hut Raspberry Pi 4 Pro Mounting Plate for High Quality Camera

Brand: The Pi Hut
An affordable, simple solution to mounting your Raspberry Pi to your Raspberry Pi High Quality Camera.
$9.95 AUD, inc GST

HighPi Pro 5S Toolless Pi 5 Case

Brand: The Pi Hut
Discover the HighPi Pro 5S, a toolless case designed specifically for Raspberry Pi 5 with optimized ventilation for active cooling, flexible HAT compatibility, and easy snap-together assembly.
$25.70 AUD, inc GST

Pimoroni Pan-Tilt HAT for Raspberry Pi - without pan-tilt module

Brand: Pimoroni
The Pan-Tilt HAT from Pimoroni lets you mount and control a pan-tilt module right on top of your Raspberry Pi. The HAT and its on-board microcontroller let you independently...
$34.70 AUD, inc GST

The Pi Hut Raspberry Pi 4 Basic Mounting Plate for High Quality Camera

Brand: The Pi Hut
An affordable, simple solution to mounting your Raspberry Pi to your Raspberry Pi High Quality Camera.
$6.50 AUD, inc GST

The Pi Hut Raspberry Pi 3A+ Basic Mounting Plate for High Quality Camera

Brand: The Pi Hut
An affordable, simple solution to mounting your Raspberry Pi to your Raspberry Pi High Quality Camera.
$6.30 AUD, inc GST

Pibow Case for Raspberry Pi Zero 2 W

Brand: Pimoroni
Protect your Pi Zero 2 W in style with the Pibow Zero 2 W case, in calming violet waters - ocean blue, purple, and deep blue! Note: this case is for the...
$17.90 AUD, inc GST

IMX291 1080p Low-Light USB Wide-Angle Camera Module

Brand: Arducam

This IMX291 is a 2MP CMOS USB camera with a pre-installed IR-filtering 160° wide-angle M12 lens

$81.45 AUD, inc GST

Raspberry Pi 6mm Wide Angle Camera Lens (CS-Mount)

Brand: Raspberry Pi
A low-cost wide 6mm lens for Raspberry Pi High Quality Camera. This lens is suitable for basic photography and is also suitable for macro as it can focus objects at very short distances.
$43.60 AUD, inc GST

Arducam 5MP Plus OV5642 Mini Module Camera

Brand: Arducam
Arducam-Mini-5MP-Plus(OV5642) is performance improved version compared to its predecessor Arducam-M-5MP.
$70.55 AUD, inc GST

Megapixel 720p USB Wide-angle Camera for Raspberry Pi and NVIDIA Jetson Nano

Brand: DFRobot
This megapixel USB wide-angle camera with a resolution of 1280*720 supports 140-degree viewing angle and standard UVC communication protocol. It is...
$35.04 AUD, inc GST

Arducam High Quality IR-CUT Camera for Raspberry Pi (12.3MP)

Brand: Arducam
This Arducam module uses the same 12MP IMX477 image sensor as the Raspberry…
$109.95 AUD, inc GST

Wireless Lavalier Microphone for Smartphone and Camera

Brand: Core Electronics
Portable Rechargable Wireless Lavalier Microphone System with easy connection between portable Microphone with Transmitter and Receiver to plug into your...
$119.95 AUD, inc GST

Arducam C-Mount Lens for Raspberry Pi High Quality Camera, 35mm Focal Length with Manual Focus and Adjustable Aperture

Brand: Arducam
Arducam C-Mount Lens for Raspberry Pi HQ Camera, 35mm Focal Length with Manual Focus and Adjustable Aperture...
$92.60 AUD, inc GST

Airwood Cubee Drone Camera Kit

Brand: Airwood
The Best Toys are not just for fun, but for deep experience and knowledge. Learn while playing. Science, Technology, Engineering, Art and Mathematics (STEAM), AirWood is not just a toy, it is an engineering project for your kids.
$169.95 AUD, inc GST

Adafruit OV5640 Camera Breakout - 120 Degree Low Distortion

Brand: Adafruit
Hobby-level microcontrollers are finally getting big and powerful enough to start handling camera modules that historically would have required a full...
$24.35 AUD, inc GST

M5StickV K210 AI Camera (Without Wifi)

Brand: M5Stack
M5Stack recently launched the new AIoT(AI+IoT) Camera powered by Kendryte K210 -an edge computing system-on-chip(SoC) with dual-core 64bit RISC-V CPU and advanced neural network processor..
$98.20 AUD, inc GST

3 in 1 Camera Lens Set

Brand: The Pi Hut
This lovely little lens is the best way to expand the field of view of your Raspberry Pi camera! ...
$14.60 AUD, inc GST

3-in-1 Waterproof USB Endoscope Inspection Camera

Brand: DFRobot
Get this camera to help you see what you cannot see and touch! This small inspection camera employs a 3-in-1 USB+micro USB+Type-C design for being conveniently used...
$33.55 AUD, inc GST

Raspberry Pi Camera FPC Adapter Cable 200mm

Brand: Raspberry Pi

These cables enable communication between the Raspberry Pi 5 and current CSI-connected camera products.

$1.83 AUD, inc GST

ArduCAM USB3.0 Shield Plus: High-Speed Multi-Camera Control Board for PC & Embedded Systems

Brand: Arducam

Explore the versatile ArduCAM USB3.0 Camera Shield Plus, a high-performance USB camera control board for PCs and embedded systems, supporting a wide range of camera modules up to 21MP, featuring advanced MIPI camera support and enhanced USB3.0 bandwidth for robust imaging solutions.

$314.95 AUD, inc GST

Flex Cable for Raspberry Pi Camera - 100mm / 4"

Brand: Adafruit
This cable will let you swap out the stock 150mm long flex cable from a Raspberry Pi Camera (either 'classic' or 'NoIR' type) for a different size. Works great, just carefully open the connector on the Pi and slip this one in.
$3.65 AUD, inc GST

Adafruit OV5640 Camera Breakout - 160 Degree Wide Angle

Brand: Adafruit
Hobby-level microcontrollers are finally getting big and powerful enough to start handling camera modules that historically would have required a full...
$30.30 AUD, inc GST

The Pi Hut Raspberry Pi 3A+ Pro Mounting Plate for High Quality Camera

Brand: The Pi Hut
An affordable, simple solution to mounting your Raspberry Pi to your Raspberry Pi High Quality Camera.
$10.30 AUD, inc GST

Adafruit OV5640 Camera Breakout - 120 Degree Lens with Autofocus

Brand: Adafruit
Coming soon! Sign up to be notified when these are in stockHobby-level microcontrollers are finally getting big and powerful enough to start handling...
$25.95 AUD, inc GST

Adafruit PiCowBell Camera Breakout - Wide Angle 160 Degree Lens

Brand: Adafruit
Ding dong! Hear that? It's the PiCowbell ringing, letting you know that the new Adafruit PiCowbell OV5640 Camera Breakout with 160-Degree Wide-Angle...
$38.95 AUD, inc GST

Makeblock AI Camera 2.0

Brand: Makeblock

AI vision module with 9 built-in models, offline training and edge AI, easily add to the mBot2 and CyberPi via mBuild for face, colour, gesture tracking and many more.

$169.95 AUD, inc GST

Arducam Pico4ML TinyML Dev Kit: RP2040 Board w/ QVGA Camera

Brand: Arducam

Arducam team took the Raspberry Silicon - the  RP2040 and created Pico4ML. A microcontroller dev board for embedded machine learning.

$42.95 AUD, inc GST

Raspberry Pi 16mm Telephoto Camera Lens (C-Mount)

Brand: Raspberry Pi
The 16mm camera lens provides a higher quality image than the 6mm lens. It has a narrow-angle of view which is more suited to viewing distant objects when fitted to the Raspberry Pi HQ Camera.
$78.53 AUD, inc GST

Panel Mount Kit for Raspberry Pi Camera Module 3

Brand: The Pi Hut
We've lost count of how many times we've tried to mount a camera module onto a panel or enclosure but struggled to drill the very small M2 holes right at...
$6.45 AUD, inc GST

Adafruit AMG8833 IR Thermal Camera FeatherWing

Brand: Adafruit
A Feather board without ambition is a Feather board without FeatherWings! This is the Thermal Camera FeatherWing: thanks to the Panasonic AMG8833 8x8 GridEYE sensor...
$76.40 AUD, inc GST
Feedback

Please continue if you would like to leave feedback for any of these topics:

  • Website features/issues
  • Content errors/improvements
  • Missing products/categories
  • Product assignments to categories
  • Search results relevance

For all other inquiries (orders status, stock levels, etc), please contact our support team for quick assistance.

Note: click continue and a draft email will be opened to edit. If you don't have an email client on your device, then send a message via the chat icon on the bottom left of our website.

Makers love reviews as much as you do, please follow this link to review the products you have purchased.