Search results for: 'avr programmer'
USBasp USBISP 3.3V/5V AVR Programmer
Brand: Core Electronics
This handy little programmer is well known by hobbyists and seasoned AVR coders alike. The drivers are compatible with 32 and 64bit operating systems.
$4.20 AUD, inc GST
Adafruit UPDI Friend - USB Serial UPDI Programmer
Brand: Adafruit
UPDI stands for Unified Program and Debug Interface, but this board is so smol and cute that we will call it the Unusually Playful Device Interfacer and...
$13.70 AUD, inc GST
Pololu USB AVR Programmer v2.1
Brand: Pololu
A USB In-system programmer, suitable for AVR controllers and AVR based boards. Can be used for general purpose serial communication, debugging or programming microcontrollers
$29.35 AUD, inc GST
Pocket AVR Programmer
Brand: Sparkfun
This new version uses an SMD 5x2 header. This is a simple to use USB AVR programmer. It is low cost, easy to use, works great with AVRDude, and is tested extensively on a Windows desktop. Based on Dick Streefland’s USBtiny and Limor Fried’s USBtinyISP. This is a low-cost programmer designed for those on a tight budget.
$34.20 AUD, inc GST
Adafruit High Voltage UPDI Friend - USB Serial UPDI Programmer
Brand: Adafruit
UPDI stands for Unified Program and Debug Interface, but this board is so smol and cute that we will call it the Unusually Playful Device Interfacer and...
$18.95 AUD, inc GST
CP2102N USB-to-Serial Adapter Carrier
Brand: Pololu
This USB-to-serial adapter lets you easily connect a TTL serial device to a PC by acting as a virtual serial port. The board is a Micro-USB carrier for ...
$25.05 AUD, inc GST
Pololu USB AVR Programmer
Brand: Pololu
This device is a programmer for AVR-based controllers, such as Pololu's Orangutan robot controllers and the 3pi robot. The programmer emulates an STK500 on a virtual serial port, making it compatible with standard AVR programming software. Two additional features help with building and debugging projects: a TTL-level serial port for general-purpose communication and a SLO-scope for monitoring signals and voltage levels. A USB cable and ISP cable are included.
$50.20 AUD, inc GST
USBtinyISP-Arduino bootloader programmer
Brand: DFRobot
This is a USB AVR programmer supported by offical Arduino IDE. Once the Arduino has lost its bootloader for some reasons, use this programmer to reburn the bootloader and save the dead Arduino.
$21.55 AUD, inc GST
Standalone AVR ISP Programmer Shield Kit - includes blank chip!
Brand: Adafruit
This shield kit pack will allow you to turn any Arduino into an AVR chip burner! It is specifically designed for people who want to program Atmega328P's to turn...
$32.55 AUD, inc GST
Mates Programmer
Brand: Sparkfun
The Mates Programmer is a simple USB programmer for all Breadboard Mates products...
$22.25 AUD, inc GST
MPLAB PICkit 4 In-Circuit Debugger
Brand: Sparkfun
This is the PICkit 4, the official programmer from Microchip. The PICkit 4 allows debugging and programming of PIC®, dsPIC®, AVR, SAM and CEC flash microcontrollers...
$259.95 AUD, inc GST
Adafruit 6-pin AVR ISP Breadboard Adapter Mini Kit
Brand: Adafruit
Programming AVR? Always Googling the pinout? Well, now no longer! It's rare to find a mini kit so elegant, it deserves its own Haiku. A simple breakout, 2x3 box...
$1.95 AUD, inc GST
AVR Programming Cable
Brand: Sparkfun
This is a handy AVR programming cable that incorporates both the 10-pin and 6-pin ISP programming interfaces.
$4.40 AUD, inc GST
6-Conductor Ribbon Cable with IDC Connectors 12"
Brand: Pololu
This 12" (30 cm), 6-conductor ribbon cable has a female 2×3 IDC connector on each end that is designed to plug into a 0.100" (2.54 mm) 2×3 shrouded box header. It can also be used with 0.100" male header pins.
$6.65 AUD, inc GST
Pin Map Sticker for ATMEGA328 with Optiboot
Brand: Sparkfun
This is a sticker sized to the ATMEGA328 IC with the pinout printed on top...
$1.80 AUD, inc GST
Similar matches
Arduino UNO Q - 2GB
Brand: Arduino
Combining a high-performance Linux CPU with real-time control - capable of running modern tasks such as machine vision, voice recognition. All bundled into a powerful, easy-to-use Uno board.
$59.00 AUD, inc GST $76.50
Arduino Mega 2560 R3
Brand: Arduino
The Arduino Mega 2560 is an update on the older Mega board and provides 54 digital IO pins, perfect for larger projects. If you've worked with the Arduino Uno, or other smaller Arduino boards, then you'll love the Mega 2560.
$88.07 AUD, inc GST
Arduino Micro
Brand: Arduino
The Arduino Micro is a small version of the Arduino Leonardo with two more analog inputs and a breadboard-friendly form factor
$41.70 AUD, inc GST
Witty Pi 4 HAT - RTC & Power Management for Raspberry Pi
Brand: Adafruit
Witty Pi 4 is an add-on board that adds real-time clock and power management to your Raspberry Pi. It can define your Raspberry Pi’s ON/OFF sequence...
$89.20 AUD, inc GST
Witty Pi 4 Mini - Realtime Clock and Power Management for Raspberry Pi
Brand: The Pi Hut
The Witty Pi 4 Mini is an add-on board that adds a real-time clock (RTC) and power management to your Raspberry Pi. It can define your Raspberry Pi’s...
$45.70 AUD, inc GST
MicroView - USB Programmer
Brand: Sparkfun
The MicroView is the first chip-sized Arduino compatible module that lets you see what your Arduino is thinking using a built-in OLED display. This USB programmer connects directly to the MicroView and lets you not only program the module, but use it to interface with your computer, Rapsberry Pi, or other USB device. The programmer has both male and female headers which allow it to be plugged into a MicroView module and a breadboard at the same time, making prototyping quick and easy.
$32.80 AUD, inc GST
3pi+ 32U4 OLED Robot - Hyper Edition (15:1 HPCB Motors), Assembled
Brand: Pololu
The Pololu 3pi+ 32U4 OLED robot is a high-performance mobile platform based on the Arduino-compatible ATmega32U4 MCU. Its many features include dual...
$329.95 AUD, inc GST
BlinkM - I2C Controlled RGB LED
Brand: Sparkfun
BlinkM is a “Smart LED”, a networkable and programmable full-color RGB LED for hobbyists, industrial designers, prototypers, and experimenters. It is designed to allow the easy addition of dynamic indicators, displays, and lighting to existing or new projects. If you’ve used up all your microcontroller PWM channels controlling RGB LEDs and still want more, BlinkM is for you. BlinkM uses a high quality, high power RGB LED and a small AVR microcontroller to allow a user to digitally control an RGB LED over a simple I2C interface. Multiple BlinkMs can be stranded together on an I2C bus allowing for some amazing light displays.
$44.40 AUD, inc GST
Pololu A-Star 32U4 Prime SV microSD
Brand: Pololu
The A-Star 32U4 Prime SV is a programmable board based on the ATmega32U4 AVR microcontroller and arranged in the common Arduino form factor. The A-Star Prime offers many additional features and improvements over competing products, including superior power management that enables efficient operation from 5 V to 36 V. This configuration of the A-Star 32U4 Prime SV includes microSD support and preinstalled female headers common to many Arduinos.
$73.60 AUD, inc GST
3pi+ 32U4 OLED Robot - Standard Edition (30:1 MP Motors), Assembled
Brand: Pololu
The Pololu 3pi+ 32U4 OLED robot is a complete, high-performance mobile platform based on the Arduino-compatible ATmega32U4 MCU. Its many features include...
$314.95 AUD, inc GST
3pi+ 32U4 OLED Robot - Turtle Edition (75:1 LP Motors), Assembled
Brand: Pololu
The Pololu 3pi+ 32U4 OLED robot is a complete, high-performance mobile platform based on the Arduino-compatible ATmega32U4 MCU. Its many features include...
$314.95 AUD, inc GST
Pololu A-Star 32U4 Prime SV microSD with LCD
Brand: Pololu
The A-Star 32U4 Prime SV is a programmable board based on the ATmega32U4 AVR microcontroller and arranged in the common Arduino form factor. The A-Star Prime offers many additional features and improvements over competing products, including superior power management that enables efficient operation from 5 V to 36 V. This configuration of the A-Star 32U4 Prime SV includes microSD support, preinstalled female headers common to many Arduinos, and a removable 8×2 character LCD.
$88.35 AUD, inc GST
Pololu A-Star 32U4 Robot Controller LV with Raspberry Pi Bridge
Brand: Pololu
This programmable module combines with a Raspberry Pi to serve as the control center of a small robot or electronics project. Its ATmega32U4 AVR microcontroller comes preloaded with an Arduino-compatible bootloader, and the board includes dual motor drivers that can deliver 1.8 A per channel to two brushed DC motors. An efficient voltage regulator (2.7 V to 11 V input) and level shifters enable it to power and communicate with a Raspberry Pi. This version (item #3117) is assembled with selected through-hole connectors and components installed for use as a Raspberry Pi add-on.
$82.20 AUD, inc GST
3pi+ 32U4 OLED Robot Kit with 30:1 MP Motors (Standard Edition Kit)
Brand: Pololu
The Pololu 3pi+ 32U4 OLED robot is a complete, high-performance mobile platform based on the Arduino-compatible ATmega32U4 MCU, and this kit contains all...
$294.95 AUD, inc GST
A-Star 32U4 Mini SV
Brand: Pololu
The A-Star 32U4 Mini SV is a programmable module based on the ATmega32U4 from Microchip (formerly Atmel). Unlike competing products, it has an on-board...
$50.05 AUD, inc GST
A-Star 328PB Micro 3.3V 12MHz
Brand: Pololu
The A-Star 328PB Micro is a tiny programmable module featuring the ATmega328PB AVR microcontroller, a backward-compatible replacement for the popular ATmega328P that features more general-purpose I/O and many additional peripherals.
$19.70 AUD, inc GST
3pi+ 32U4 OLED Robot Kit with 15:1 HPCB Motors (Hyper Edition Kit)
Brand: Pololu
The Pololu 3pi+ 32U4 OLED robot is a complete, high-performance mobile platform based on the Arduino-compatible ATmega32U4 MCU, and this kit contains all...
$314.95 AUD, inc GST
A-Star 32U4 Prime LV (SMT Components Only) (ac03b)
Brand: Pololu
Clearance: This product is being replaced by a newer ac03e version with an improved 5 V regulator that operates from 2 V to 16 V and can deliver more...
$33.55 AUD, inc GST
A-Star 328PB Micro 3.3V 8MHz
Brand: Pololu
The A-Star 328PB Micro is a tiny programmable module featuring the ATmega328PB AVR microcontroller, a backward-compatible replacement for the popular ATmega328P that features more general-purpose I/O and many additional peripherals.
$19.70 AUD, inc GST
Pololu A-Star 32U4 Prime LV (SMT Components Only)
Brand: Pololu
The A-Star 32U4 Prime LV is a programmable board based on the ATmega32U4 AVR microcontroller and arranged in the common Arduino form factor. The A-Star Prime offers many additional features and improvements over competing products, including superior power management that enables efficient operation from 2 V to 16 V (though it requires at least 3 V at start-up). This configuration of the A-Star 32U4 Prime LV has no microSD support and does not include any through-hole components; it is intended for those who want to customize the way it is assembled.
$55.80 AUD, inc GST
A-Star 32U4 Prime LV (ac03b)
Brand: Pololu
Clearance: This product is being replaced by a newer ac03e version with an improved 5 V regulator that operates from 2 V to 16 V and can deliver more...
$40.45 AUD, inc GST
Pololu A-Star 32U4 Prime SV (SMT Components Only)
Brand: Pololu
The A-Star 32U4 Prime SV is a programmable board based on the ATmega32U4 AVR microcontroller and arranged in the common Arduino form factor. The A-Star Prime offers many additional features and improvements over competing products, including superior power management that enables efficient operation from 5 V to 36 V. This configuration of the A-Star 32U4 Prime SV has no microSD support and does not include any through-hole components; it is intended for those who want to customize the way it is assembled.
$55.80 AUD, inc GST
A-Star 328PB Micro 5V 20MHz
Brand: Pololu
The A-Star 328PB Micro is a tiny programmable module featuring the ATmega328PB AVR microcontroller, a backward-compatible replacement for the popular ATmega328P that features more general-purpose I/O and many additional peripherals.
$19.70 AUD, inc GST
Pololu A-Star 32U4 Prime LV microSD (SMT Components Only)
Brand: Pololu
The A-Star 32U4 Prime LV is a programmable board based on the ATmega32U4 AVR microcontroller and arranged in the common Arduino form factor. The A-Star Prime offers many additional features and improvements over competing products, including superior power management that enables efficient operation from 2 V to 16 V (though it requires at least 3 V at start-up). This configuration of the A-Star 32U4 Prime LV includes microSD support and does not include any through-hole components; it is intended for those who want to customize the way it is assembled.
$63.35 AUD, inc GST
Pololu A-Star 32U4 Prime SV microSD (SMT Components Only)
Brand: Pololu
The A-Star 32U4 Prime SV is a programmable board based on the ATmega32U4 AVR microcontroller and arranged in the common Arduino form factor. The A-Star Prime offers many additional features and improvements over competing products, including superior power management that enables efficient operation from 5 V to 36 V. This configuration of the A-Star 32U4 Prime SV includes microSD support and does not include any through-hole components; it is intended for those who want to customize the way it is assembled.
$63.35 AUD, inc GST
Makers love reviews as much as you do, please follow this link to review the products you have purchased.