Search results for: 'Slice of PI/O for Raspberry PI'

40 results

DiP-Pi PIoT for Raspberry Pi Pico

Brand: The Pi Hut
The DiP-Pi PIoT is an advanced Internet of Things (IoT) add-on board for the Raspberry Pi Pico offering a wide range of power input options, onboard...
$28.50 AUD, inc GST

Adafruit FPC Breakout for Raspberry Pi 5 DSI or RP2350 HSTX - 22 Pin 0.5mm

Brand: Adafruit
This little breakout board is specifically designed for use with Raspberry Pi 5 or our RP2350 boards that have an 'HSTX' connector. These devices...
$4.70 AUD, inc GST

Fan Controller for Raspberry Pi - Horizontal

Brand: The Pi Hut
This is a small board with a load switch that allows a Raspberry Pi to automatically temperature control a fan (not included) via GPIO3. It's an...
$9.60 AUD, inc GST

USB-C In-Line Power Switch Cable for Raspberry Pi 4

Brand: Core Electronics
This handy little guy is a female to male USB C cable with an inline switch which allows you to toggle the device ON or OFF on your Raspberry Pi 4.
$3.45 AUD, inc GST

RasPiKey: Plug And Play EMMC Module For Raspberry Pi - 32GB - 32GB

Brand: The Pi Hut
RasPiKey is a 16GB or 32GB (select version above) eMMC module which can be inserted into your Raspberry Pi’s Micro SD card slot. It works like a micro SD...
$78.10 AUD, inc GST

DiP-Pi WiFi Master for Raspberry Pi Pico

Brand: The Pi Hut
The DiP-Pi WiFi Master is an advanced WiFi connectivity add-on board for the Raspberry Pi Pico offering ESP8266 WiFi connectivity, MicroSD card slot,...
$35.40 AUD, inc GST

Giant Butterfly for Raspberry Pi

Brand: The Pi Hut
The Giant Butterfly allows four HATs or pHATs (or a mix) to be attached to a single Raspberry Pi 40-way connector. All pins are connected and the ID_SD...
$9.50 AUD, inc GST

Pilot Gateway Pro LoRa Enclosure Kit for Raspberry Pi 4 - RAK7244

Brand: Adafruit
If you have a Raspberry Pi LoRa project using our fancy 8-Channel LoRa HAT you want enclosed and need something extra durable, this...
$84.70 AUD, inc GST

Aluminium Heatsink Case for Raspberry Pi 4 Gold (Passive Cooling, Silent)

Brand: Core Electronics
Why use a heatsink and a case, when you can use a heatsink case?! This sleek, anodised aluminium case for Raspberry Pi 4 will give you 10-15°C of passive cooling under full CPU load. Pretty cool.
$14.80 AUD, inc GST

Environment Sensors Module for Raspberry Pi Pico

Brand: Waveshare
Environment Sensors Module For Raspberry Pi Pico, I2C Bus...
$57.60 AUD, inc GST

Tall Aluminium Heatsink & Fan for Raspberry Pi Compute Module 4 (CM4)

Brand: The Pi Hut
This tall heatsink + programmable fan combo for the Raspberry Pi Compute Module 4 is the ideal choice for those looking for the ultimate cooling aid for...
$23.60 AUD, inc GST

ICE Tower Cooler for Raspberry Pi 5 Single Board Computer

Brand: DFRobot
The Ice Tower-style RGB Cooling Case for Raspberry Pi 5. With its customizable, adjustable-speed, and color-changing features, it ensures efficient heat...
$30.27 AUD, inc GST

Dual Fans Metal Case for Raspberry Pi 5 Single Board Computer

Brand: DFRobot
The Dual-Fan Metal Case for Raspberry Pi 5 is made from aluminum alloy it offers effective protection and efficient heat dissipation. The case features...
$30.06 AUD, inc GST

Pimoroni Fan SHIM for Raspberry Pi

Brand: Pimoroni
Make your Raspberry Pi seriously cool with Fan SHIM! This 30mm no-solder, controllable CPU fan with RGB LED and tactile switch will give your Raspberry Pi significantly better thermal performance.
$24.75 AUD, inc GST

Adafruit DC & Stepper Motor Bonnet for Raspberry Pi

Brand: Adafruit
Let your robotic dreams come true with the new DC+Stepper Motor Bonnet from Adafruit. This Raspberry Pi add-on is perfect for any motion project as it can drive...
$43.30 AUD, inc GST

PiKVM v3 HAT for Raspberry Pi 4

Brand: HiPi.io
A hardware-based approach to remoting into a machine via a Raspberry Pi, it allows for remote power cycling, keyboard, video and mouse interactions directly via the Pi!
$244.95 AUD, inc GST

Black Zipper Sleeve Case with Handle for Raspberry Pi 400

Brand: Adafruit
How many bags and pockets does an OTG (On The Go) maker need to carry their electronics when away from their desk? The world may never...
$44.10 AUD, inc GST

PicoRelay8 for Raspberry Pi Pico

Brand: The Pi Hut
The PicoRelay8 allows eight 28V DC/10A Normally Open relays to be controlled using a Raspberry Pi Pico. Each relay is controlled by a Pico GPIO pin -...
$45.95 AUD, inc GST

Adafruit GPIO Reference Card for Raspberry Pi Pico

Brand: Adafruit
This handy GPIO reference card is the perfect pocket-friendly go-to resource for navigating your way around the Raspberry Pi Pico.
$1.20 AUD, inc GST

7inch Capacitive Touch IPS Display for Raspberry Pi

Brand: Waveshare
Vibrant, accurate colours, DSI Interface, 1024×600
$98.80 AUD, inc GST

M-Bus HAT for Raspberry Pi

Brand: The Pi Hut
With this M-Bus HAT, you can extend your Raspberry Pi with functions for smart metering! The HAT provides an M-Bus master to which other M-Bus devices...
$80.30 AUD, inc GST

Arducam High Quality IR-CUT Camera for Raspberry Pi (12.3MP)

Brand: Arducam
This Arducam module uses the same 12MP IMX477 image sensor as the Raspberry…
$109.95 AUD, inc GST

5 Inch Low-Power DSI IPS Touch Display for Raspberry Pi (800×480 Pixels)

Brand: Waveshare
5inch Capacitive IPS Touch Display For Raspberry Pi, 800×480, DSI Interface, Low Power Consumption...
$69.95 AUD, inc GST

SX1303 915M LoRaWAN Gateway Module+HAT for Raspberry Pi

Brand: Waveshare
SX130x 868M/915M LoRaWAN Gateway Module/HAT for Raspberry Pi, L76K Module(HAT only), Standard Mini-PCIe Socket, Long range Transmission, Large Capacity,...
$159.95 AUD, inc GST

PCIe To M.2 Adapter Board With Cooling Fan For Raspberry Pi 5

Brand: Waveshare
PCIe To M.2 Adapter Board (E) for Raspberry Pi 5, With Cooling Fan, Compatible with 2242 / 2230 size NVMe Protocol M.2 SSD, 8Gbps Data Rate, High-speed...
$21.15 AUD, inc GST

3.5inch Capacitive Touch Display (F) for Raspberry Pi

Brand: Waveshare
3.5inch Capacitive Touch Display (F) for Raspberry Pi, IPS Panel, 320×480 Resolution, 5-point Touch, Immersion Gold Process, Toughened Glass Panel...
$35.30 AUD, inc GST

PiCam Module for Raspberry Pi Compute Module 4 - Camera & Compute Module Not Incl

Brand: Adafruit
The PiCam Module is the mechanical solution to connect a 'standard' Raspberry Pi camera to a Raspberry Pi Compute Module 4 board, without a big...
$86.55 AUD, inc GST

PCIe To M.2 Adapter With PoE For Raspberry Pi 5

Brand: Waveshare
PCIe To M.2 Adapter With PoE Function For Raspberry Pi 5, Supports NVMe Protocol M.2 Solid State Drive, High-speed Reading/Writing, Supports 802.3af/at network standard, Raspberry Pi 5 PoE HAT
$39.30 AUD, inc GST

Argon THRML 60mm Heatsink Radiator for Raspberry Pi 5

Brand: Argon40

Keep your Raspberry PI cool with this huuuuge 60mm radiator.

$38.60 AUD, inc GST

Maker Hat Base - HAT & GPIO Extension for Raspberry Pi 400

Brand: Cytron
Maker Hat Base extends out all the GPIOs of the Raspberry Pi 400 in a quick and simple way - be it using your favorite HAT or building your own simple...
$38.50 AUD, inc GST

Argon ONE v3 NVMe PCIe Expansion Board for Raspberry Pi 5

Brand: Argon40

An add-on that replaces the stock standard base that comes with the Argon ONE V3. Allows you to upgrade your Pi with an M.2 NVMe SSD.

$33.30 AUD, inc GST

PiTray Clip Din Rail Mount (Compatible for Raspberry Pi and NVIDIA Jetson Nano)

Brand: DFRobot
PiTray clip is a Din Rail mounter for Single Board Computers like Raspberry Pi. Assembled of a 304 Stainless Steel blended plate and nylon clip with spring, it provides .. read more
$10.92 AUD, inc GST

Raspberry Pi Dual Cooling Fans Kit (Compatible for Raspberry Pi 3B/3B+/4B)

Brand: DFRobot
This is a one-fan Raspberry Pi radiator compatible with Raspberry Pi 3B/3B+/4B. The heat sink is made of high-quality aluminum, and the surface is designed with...
$10.69 AUD, inc GST

Aluminium Heatsink Case for Raspberry Pi 4 Black (Passive Cooling, Silent)

Brand: Core Electronics
Why use a heatsink and a case, when you can use a heatsink case?! This sleek, anodised aluminium case for Raspberry Pi 4 will give you 10-15°C of passive cooling under full CPU load. Pretty cool.
$15.15 AUD, inc GST

Pololu Dual G2 High-Power Motor Driver 18v18 for Raspberry Pi (Assembled)

Brand: Pololu
This add-on board makes it easy to control two high-power DC motors with a Raspberry Pi. Its twin discrete MOSFET H-bridges support a wide 6.5 V to 30 V...
$124.95 AUD, inc GST

Pololu Dual G2 High-Power Motor Driver 18v18 for Raspberry Pi (Partial Kit)

Brand: Pololu
This add-on board makes it easy to control two high-power DC motors with a Raspberry Pi. Its twin discrete MOSFET H-bridges support a wide 6.5 V to 30 V operating range and are efficient enough to deliver a continuous 18 A without a heat sink. The drivers offer basic current limiting functionality, and they accept ultrasonic PWM frequencies for quieter operation. The default pin mappings make it easy to get started, but they can be customized for more specialized applications. This version ships as a partial kit; all surface-mount components are installed, but the included through-hole connectors are not soldered in.
$114.95 AUD, inc GST

UCTRONICS PoE+ HAT for Raspberry Pi 5 (5V 4.5A)

Brand: UCTRONICS
UCTRONICS PoE+ HAT for Raspberry Pi 5, Power over Ethernet with Active Cooling Fan, Aluminum Heatsink, Supports IEEE 802.3af/at Network Standard, 5V 4.5A...
$50.40 AUD, inc GST

Multi Camera Adapter Module V2.2 for Raspberry Pi Camera Module

Brand: Arducam

This adapter module allows you to connect more cameras to your Pi via the CSI connections, multiplexing one socket to four.

$82.15 AUD, inc GST

Pololu Dual G2 High-Power Motor Driver 24v18 for Raspberry Pi (Partial Kit)

Brand: Pololu
This add-on board makes it easy to control two high-power DC motors with a Raspberry Pi. Its twin discrete MOSFET H-bridges support a wide 6.5 V to 36 V operating range and are efficient enough to deliver a continuous 18 A without a heat sink. The drivers offer basic current limiting functionality, and they accept ultrasonic PWM frequencies for quieter operation. The default pin mappings make it easy to get started, but they can be customized for more specialized applications. This version ships as a partial kit; all surface-mount components are installed, but the included through-hole connectors are not soldered in.
$154.95 AUD, inc GST

3v3 Sustain for Raspberry Pi

Brand: The Pi Hut
When rebooting a Raspberry Pi 4, the 3.3V rail is reset which causes problems for some HATs and projects. The 3v3 Sustain solves this problem! The board...
$8.60 AUD, inc GST
Feedback

Please continue if you would like to leave feedback for any of these topics:

  • Website features/issues
  • Content errors/improvements
  • Missing products/categories
  • Product assignments to categories
  • Search results relevance

For all other inquiries (orders status, stock levels, etc), please contact our support team for quick assistance.

Note: click continue and a draft email will be opened to edit. If you don't have an email client on your device, then send a message via the chat icon on the bottom left of our website.

Makers love reviews as much as you do, please follow this link to review the products you have purchased.