Quantity Discounts:
Out of Stock
Sign up to get notified when it's available to order.
The PiCam Module is the mechanical solution to connect a 'standard' Raspberry Pi camera to a Raspberry Pi Compute Module 4 board, without a big dev board. Perfect for making simple camera/vision boards.
The Raspberry Pi Compute Module 4 (not included!) can be plugged into the bottom of the PiCam module. The camera (also not included!) is connected to the PiCam module via FFC/FPC ribbon cable. If needed, the camera module can also be mounted directly on the PiCam module, which achieves maximum compactness. The existing mounting holes cover a variety of Raspberry camera modules. Mounting hardware is not included, you could probably use Adafruit's M2.5 mounting kit if you don't have standoffs kicking around.
Any 15-pin camera should be compatible. Additionally, the PiCam module can also be used for programming the Raspberry Pi Compute Module 4.
Usage Warning: According to the manufacturer, when connecting the camera sensor, it is essential to ensure that the 15-pin FFC/FPC cable is connected in the correct orientation! Otherwise, everything - the camera module, the Raspberry Pi Compute Module 4, and the PiCam module will be irreversibly damaged!
Product Dimensions: 56.1mm x 40.3mm x 10.2mm / 2.2" x 1.6" x 0.4"
Product Weight: 8.8g / 0.3oz
Exact shipping can be calculated on the view cart page (no login required).
Products that weigh more than 0.5 KG may cost more than what's shown (for example, test equipment, machines, >500mL liquids, etc).
We deliver Australia-wide with these options (depends on the final destination - you can get a quote on the view cart page):
Non-metro addresses in WA, NT, SA & TAS can take 2+ days in addition to the above information.
Some batteries (such as LiPo) can't be shipped by Air. During checkout, Express Post and International Methods will not be an option if you have that type of battery in your shopping cart.
International Orders - the following rates are for New Zealand and will vary for other countries:
If you order lots of gear, the postage amount will increase based on the weight of your order.
Our physical address (here's a PDF which includes other key business details):
Unit 18, 132 Garden Grove Parade
Adamstown
NSW, 2289
Australia
Take a look at our customer service page if you have other questions such as "do we do purchase orders" (yes!) or "are prices GST inclusive" (yes they are!). We're here to help - get in touch with us to talk shop.
Have a product question? We're here to help!
Makers love reviews as much as you do, please follow this link to review the products you have purchased.
Product Comments