Search results for: '6-pin cable'

50 results

2.0mm Pitch 6-pin Cable Matching Pair - JST PH Compatible

Brand: Adafruit
These solid 2.0mm pitch connector cable pairs are great when you need something that can carry a couple of amps of current and are easy to connect and disconnect.
$2.35 AUD, inc GST

2.5mm Pitch 6-pin Cable Matching Pair - JST XH compatible

Brand: Adafruit
These solid 2.5mm pitch connector cable pairs are great when you need something that can carry a couple amps of current, easy to connect and disconnect, and is just-about 0.1" pitch compatible.
$3.10 AUD, inc GST

6-Pin Single-Ended Female JST SH-Style Cable 30cm

Brand: Pololu
This 30 cm (12") cable has six 28 AWG wires and a 6-pin female JST SH-type connector that works with our Micro Metal Gearmotor Encoders with top-entry...
$4.95 AUD, inc GST

USB Type C Screw Panel Mount to 6 pin JST PH Cable

Brand: Adafruit
This panel mount cable is great for making USB Type C connections with a panel-mount setup. On the small panel-mount side you get a USB C connector, the...
$6.35 AUD, inc GST

JST GH 1.25mm Pitch 6 Pin Cable - 100mm long

Brand: Adafruit
This cable is a little over 100mm / 4" long and fitted with JST-GH compatible 6-pin connectors on either end. We dig the solid and compact nature of...
$1.95 AUD, inc GST

6-Pin Single-Ended Female JST SH-Style Cable 12cm

Brand: Pololu
This 12 cm (4.5") cable has six 28 AWG wires and a 6-pin female JST SH-type connector that works with our Micro Metal Gearmotor Encoders with top-entry...
$3.50 AUD, inc GST

JST PH-Style Cable, 6-Pin, Female-Female, 10cm

Brand: Pololu
This 6-conductor, 10 cm (4") cable has 24 AWG wires and 6-pin female JST PH-type connectors (2mm pitch) on both ends...
$5.40 AUD, inc GST

6-Pin Female-Female JST SH-Style Cable 10cm

Brand: Pololu
This 10 cm (4") cable has six 28 AWG wires and 6-pin female JST SH-type connectors on both ends. These connectors work with our Micro Metal Gearmotor ...
$5.60 AUD, inc GST

Ribbon Cable - 6 wire (15ft/4.5m)

Brand: SparkFun
Ribbon cable is really helpful in situations where you need to make a lot of connections without a big mess of wires. Nothing makes a project look more finished than a nice clean wiring harness.
$9.20 AUD, inc GST

6-Pin Female-Female JST SH-Style Cable 16cm

Brand: Pololu
This 16 cm (6.3") cable has six 28 AWG wires and 6-pin female JST SH-type connectors on both ends. These connectors work with our Micro Metal Gearmotor ...
$6.05 AUD, inc GST

6-Pin Female-Female JST SH-Style Cable 25cm

Brand: Pololu
This 25 cm (10") cable has six 28 AWG wires and 6-pin female JST SH-type connectors on both ends. These connectors work with our Micro Metal Gearmotor ...
$6.85 AUD, inc GST

Breadboard to JST-ZHR Cable - 6-pin x 1.5mm Pitch

Brand: SparkFun
This is a 6-pin JST-ZHR cable that's terminated on the end with breadboard compatible Dupont connectors. The six male pins that terminate one side of the cable feature...
$4.75 AUD, inc GST

6-Pin Female-Female JST SH-Style Cable 40cm

Brand: Pololu
This 40 cm (16") cable has six 28 AWG wires and 6-pin female JST SH-type connectors on both ends. These connectors work with our Micro Metal Gearmotor ...
$7.95 AUD, inc GST

6-pin Socket/Socket IDC cable - 6

Brand: Adafruit
Connect this to that with an IDC cable! This cable has 6 pins (2x3) in 0.1"x0.1" spacing. Often used for programming AVRs. 6" long with two sockets crimped onto...
$3.90 AUD, inc GST

6-pin JST SM Plug + Receptacle Cable Set

Brand: Adafruit
These 6-wire cables are 162mm (6.4") long and come as a set. One cable has a JST SM type connector plug on the end. The other cable has a matching JST SM type receptacle...
$4.10 AUD, inc GST

6-Conductor Ribbon Cable with IDC Connectors 12"

Brand: Pololu
This 12" (30 cm), 6-conductor ribbon cable has a female 2×3 IDC connector on each end that is designed to plug into a 0.100" (2.54 mm) 2×3 shrouded box header. It can also be used with 0.100" male header pins.
$6.65 AUD, inc GST

Jumper Wire - 0.1", 6-pin, 6"

Brand: SparkFun
This is a simple six wire cable. Great for jumping from board to board or just about anything else. There is a 6-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.
$3.70 AUD, inc GST

XRP Motor to Breadboard Jumper Cable - 6in. (6-pin JST-SH)

Brand: SparkFun
This is a jumper adapter cable that comes pre-terminated with a 6-pin JST-SH connector on one end and a breadboard hookup pigtail on the other...
$3.55 AUD, inc GST

6-Pin Single-Ended Female JST SH-Style Cable 75cm

Brand: Pololu
This 75 cm (30") cable has six 28 AWG wires and a 6-pin female JST SH-type connector that works with our Micro Metal Gearmotor Encoders with top-entry...
$8.75 AUD, inc GST

6-Pin Female-Female JST SH-Style Cable 63cm

Brand: Pololu
This 63 cm (25") cable has six 28 AWG wires and 6-pin female JST SH-type connectors on both ends. These connectors work with our Micro Metal Gearmotor ...
$10.05 AUD, inc GST

JST SH Jumper 6 Wire Assembly - 8"

Brand: SparkFun
This is a simple six wire cable. Great for jumping from board to board or just about anything else. These cables mate with the connectors listed below. They have bare wires on one end and a 6-pin JST SH connector on the other end with a mating socket.
$3.80 AUD, inc GST

JST PH-Style Cable with Female Pins for 0.1" Housings, 6-Pin, 75cm

Brand: Pololu
This 6-conductor, 75 cm (30") cable has 24 AWG wires and a 6-pin female JST PH-type connector (2mm pitch) on one end. The other ends of the wires are...
$11.35 AUD, inc GST

1.25mm Pitch 6-pin Cable Matching Pair - 10 cm long - Molex PicoBlade Compatible

Brand: Adafruit
1.25mm Pitch 6-pin Cable Matching Pair - 10 cm long - Molex PicoBlade Compatible
$2.15 AUD, inc GST

1.25mm Pitch 6-pin Cable 20cm long 1:1 Cable - Molex PicoBlade Compatible

Brand: Adafruit
When 0.1" is too big, and JST PH's too chunky, this ultra-slim 1.25mm connector cable is a reliable alternative. These are 1.25mm pitch but have...
$2.45 AUD, inc GST

Breadboard to GHR-06V Cable - 6-Pin x 1.25mm Pitch

Brand: SparkFun
This is a handy cable for connecting a six pin GHR-06V type locking connector to breadboard friendly male pins. The six male pins that terminate one side of the...
$4.80 AUD, inc GST

6-conductor 0.1 socket-socket cable - 6 long

Brand: Adafruit
6" (150mm) long jumper cable of 6 conductors, 0.1" spacing with two 'female'/sockets on either end. Great for wiring up ShiftBrites together!
$3.60 AUD, inc GST

Jumper Wire - 0.1", 6-pin, 12"

Brand: SparkFun
This is a simple six wire cable. Great for jumping from board to board or just about anything else. There is a 6-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.
$4.95 AUD, inc GST

Molex Jumper 6 Wire Assembly

Brand: SparkFun
This is a simple six wire cable. Great for jumping from board to board or just about anything else. There is a 6-pin Molex connector with 0.1" spacing on one end, bare cable on the opposite end. It also comes with the mating connector for the Molex.
$5.30 AUD, inc GST

Breakout for JST SH-Style Connector, 6-Pin Male Side-Entry (3-Pack, Untested)

Brand: Pololu
This simple board serves as an adapter between a JST SH-style 6-pin male connector and breadboard-compatible 0.1"-pitch through holes. It works with our ...
$4.95 AUD, inc GST

N20 Motor With Encoder and Cable (Pair)

Brand: SparkFun
N20 motors are very popular for small-scale robots applications, because they're super compact, powerful, and durable. The entire motor fits within the...
$36.90 AUD, inc GST

IDC Breakout Helper - 2x3 (6 pin)

Brand: Adafruit
This little 2x3 (6 pin - 0.1 spaced) IDC Breadboard Helper is great in conjunction with Adafruit's 6-pin IDC cable. It comes in two parts, a 'pin-through' socket and a...
$1.95 AUD, inc GST

PCIex1 to PCIex16 Graphics Card Extension Board (Compatible with LattePanda Sigma)

Brand: DFRobot
The PCIex1 to PCIex16 graphics card Adapter Card features a PCIex16 card slot and high-speed transmission. Offers plug-and-play convenience...
$13.69 AUD, inc GST

USBtinyISP-Arduino bootloader programmer

Brand: DFRobot
This is a USB AVR programmer supported by offical Arduino IDE. Once the Arduino has lost its bootloader for some reasons, use this programmer to reburn the bootloader and save the dead Arduino.
$18.73 AUD, inc GST

Pololu USB AVR Programmer

Brand: Pololu
This device is a programmer for AVR-based controllers, such as Pololu's Orangutan robot controllers and the 3pi robot. The programmer emulates an STK500 on a virtual serial port, making it compatible with standard AVR programming software. Two additional features help with building and debugging projects: a TTL-level serial port for general-purpose communication and a SLO-scope for monitoring signals and voltage levels. A USB cable and ISP cable are included.
$50.20 AUD, inc GST
Similar matches

Raspberry Pi GPIO 40-Pin Ribbon Cable

Brand: Core Electronics
Extend your Raspberry Pi's functionality with this rainbow ribbon cable!
$3.70 AUD, inc GST

1.25mm Pitch 2-pin Cable 20cm long 1:1 Cable - Molex PicoBlade Compatible

Brand: Adafruit
When 0.1" is too big, and JST PH's too chunky, this ultra-slim 1.25mm connector cable is a reliable alternative. These are 1.25mm pitch but have a nice clicky connection.
$1.50 AUD, inc GST

10-pin 2x5 Socket-Socket 1.27mm IDC (SWD) Cable - 150mm long

Brand: Adafruit
These little cables are handy when programming or debugging a tiny board that uses 10-pin 1.27mm (0.05") pitch SWD programming connectors. Adafruit see these connectors...
$6.20 AUD, inc GST

1.25mm Pitch 8-pin Cable Matching Pair - 10 cm long - Molex PicoBlade Compatible

Brand: Adafruit
These solid 1.25mm pitch connector cable pairs are great when you need something that can carry a couple of amps of current and are easy to connect and...
$2.65 AUD, inc GST

1.25mm Pitch 4-pin Cable 20cm long 1:1 Symmetric Cable - Molex PicoBlade Compatible

Brand: Adafruit
When 0.1" is too big, and JST PH's too chunky, this ultra-slim 1.25mm connector cable is a reliable alternative. These are 1.25mm pitch but have a nice clicky connection.
$1.85 AUD, inc GST

1.25mm Pitch 4-pin Cable Matching Pair - 40cm long - Molex PicoBlade Compatible

Brand: Adafruit
When 0.1" is too big, and JST PH's too chunky, these ultra-slim 1.25mm connectors are a reliable alternative. These are only 1.25mm pitch, but have a nice clicky connection.
$1.95 AUD, inc GST
Feedback

Please continue if you would like to leave feedback for any of these topics:

  • Website features/issues
  • Content errors/improvements
  • Missing products/categories
  • Product assignments to categories
  • Search results relevance

For all other inquiries (orders status, stock levels, etc), please contact our support team for quick assistance.

Note: click continue and a draft email will be opened to edit. If you don't have an email client on your device, then send a message via the chat icon on the bottom left of our website.

Makers love reviews as much as you do, please follow this link to review the products you have purchased.