Search results for: '12v cable'

This is a 5V/3A USB-A to Type-C cable supporting large current charging and data transfer, and compatible with all USB type-C-enabled mobile phones or controller...

This USB(input) to DC(output) boost converter can step up 5V to 9V/12V with a switch for selecting voltage and a digital LED display for showing output...

This cable will let you get rid of all those wall adapters you have stashed in the plastic bin in the basement. Instead of multiple wall warts with...

This cable will let you get rid of all those wall adapters you have stashed in the plastic bin in the basement. Instead of multiple wall warts with...

24V DC 2A switch mode plug pack...

A stepper motor to satisfy all your robotics needs! This 4-wire bipolar stepper has 1.8° per step for smooth motion and a nice holding torque. The motor was specified...

This 12 cm (4.5") cable has six 28 AWG wires and a 6-pin female JST SH-type connector that works with our Micro Metal Gearmotor Encoders with top-entry...

This cable is kinda fascinating - it has an integrated boost converter, so you can plug it into any USB port (from a computer, battery pack, etc) and it will give...

The FTDI cable is a USB to Serial (TTL level) converter which allows for a simple way to connect TTL interface devices to USB. The I/O pins of this FTDI cable are configured to operate at 5V.

There's two standard ways to power electronics - USB or 5.5mm/2.1mm DC barrel jack. This or that! With this USB to 2.1mm Male Barrel Jack Cable, you can now power...

This 4-conductor, 12 cm (4.5") cable has 24 AWG wires and a 4-pin female JST PH-type connector (2mm pitch) on one end. The other ends of the wires are...

This 2-conductor, 12 cm (4.5") cable has 24 AWG wires and a 2-pin female JST PH-type connector (2mm pitch) on one end. The other ends of the wires are...

Connect this to that! If you want to bridge those contacts out onto another PCB, you'll want this GPIO Ribbon Cable! Has a nice soft flexible 20-line...

This panel mount cable is great for making USB power connections with a panel-mount setup. On the rectangular panel-mount side you get a USB Type A...

This is an inverter for EL wire and tape, similar to Adafruit's pocket inverters, except it is a brick that takes 12V input instead of 2 AA batteries. This means its good...

The 5-Pin Power Cord for Type-C Interface features easy Connection, 5V2A Output, Ideal for Outdoor Projects and Debugging Type-C Devices...

This 12-inch (300-mm), flat cable has 22-AWG wires and female “JR”-style connectors on both ends, the same kind of connector commonly found on RC hobby servos. It can be used to make connections between devices with 0.1" 3-pin male headers, such as between RC servo controllers or RC receivers and motor controllers with an RC interface. It can also be a convenient way to connect various 3-pin sensors to a robot controller. The cable’s conductors each consist of 60 strands, making it more flexible than standard servo cables.

This 12" (30 cm), 6-conductor ribbon cable has a female 2×3 IDC connector on each end that is designed to plug into a 0.100" (2.54 mm) 2×3 shrouded box header. It can also be used with 0.100" male header pins.

These jumper cables are exactly what you need to connect common 0.1" header devices together. Sure you can tape together individual 1x1 header ...