Search results for: '12v power supply'

DC-DC Adjustable Step Down Module 5A 75W XL4015

This compact (0.32"×0.515") switching step-up (or boost) voltage regulator efficiently generates 12 V from input voltages as low as 1.3 V and handles...

This DC-DC boost power supply module steps up any input voltage from 2.5V~VOUT to the output voltage of 5V/8V/9V/12V(default to 12V) at a conversion...

This DC-DC Boost Converter is well into the heavy duty end of the spectrum @ 150W; as you can tell by the huge toroidal inductor and dual heatsinks.

This synchronous switching step-up/step-down regulator efficiently produces 12 V from input voltages between 2.8 V and 22 V. Its ability to convert both...

This compact (0.6"×0.6") switching step-up (or boost) voltage regulator efficiently generates 12 V from input voltages as low as 1.3 V and handles...

*Actual achievable maximum continuous current is a function of input voltage and is limited by thermal dissipation. See the output current graphs on the...

This is a waterproof DC-DC converter. With 15-40V DC input, it converts to 12V@10A which is an ideal supply for embedded PC and robots.

This small synchronous switching step-down (or buck) regulator takes an input voltage of up to 50 V and efficiently reduces it to 12 V

This is a waterproof DC-DC converter. With 8-40V DC input, it converts to 12V 6A which is an ideal supply for embedded PC and robot power.

This small synchronous switching step-down (or buck) regulator takes an input voltage of up to 36 V and efficiently reduces it to 12 V. The board measures...

The D42V110Fx family of synchronous buck (step-down) voltage regulators generates lower output voltages from input voltages as high as 60 V.

Need those tricky split-rail voltages for your vintage electronics? The Adafruit TPS65131 Split Rail Boost Converter generates both positive and negative...

This powerful step-up/step-down regulator efficiently produces a fixed 12 V output from input voltages between 3 V and 30 V while allowing a typical output current of up to 2 A when the input voltage is close to the output voltage and offering typical efficiencies of 80% to 90%. Its ability to convert both higher and lower input voltages makes it useful for applications where the power supply voltage can vary greatly, as with batteries that start above but discharge below the regulated voltage.

The 12A DC-DC Buck Converter is an efficient 5-24V to 12V step-down module with over-temperature & short-circuit protection. Ideal for drones, robots &...

1 Minimum input voltage is subject to dropout voltage considerations; see the dropout voltage section of product pages for more information...

The compact (0.4″ × 0.5″) D24V6F12 switching step-down (or buck) voltage regulator takes an input voltage between 15 V and 42 V and efficiently reduces it to 12 V while allowing for a maximum output current of 600 mA. The pins have a 0.1″ spacing, making this board compatible with standard solderless breadboards and perfboards.

This is the basic L7812 voltage regulator, a three-terminal positive regulator with a 12V fixed output voltage. This fixed regulator provides a local regulation, internal current limiting, thermal shut-down control, and safe area protection for your project. Each one of these voltage regulators can output a max current of 1.5A.

The compact (0.5" × 0.7") D24V10F12 synchronous buck voltage regulator takes an input voltage of up to 36 V and efficiently reduces it to 12 V while...

This powerful synchronous switching boost regulator efficiently generates an output voltage of 12 V from an input voltage as low as 2.9 V while using an...

Note 1: Minimum input voltage is subject to dropout voltage considerations; see the dropout voltage section of product pages for more information...