Actuonix PQ12-100-6-R Micro-Actuator

SKU: ROB-18591 Brand: Sparkfun

The PQ12 series of micro linear actuators are ideal for applications requiring precise positioning and compact size. Weighing in at just 22 grams, the PQ12...

$174.95 AUD, inc GST

$159.05 AUD, exc GST

Available with a lead time
Expect dispatch between Nov 18 and Nov 21

Quantity Discounts:

5-10 $154.27 (exc GST)
10+ $151.09 (exc GST)

The PQ12 series of micro linear actuators are ideal for applications requiring precise positioning and compact size. Weighing in at just 22 grams, the PQ12 is incredibly light as well as compact. The affordably-priced PQ12 is the most powerful actuator of it's size. This is why it has become a popular choice for OEM manufacturers as well as Arduino and RC hobbyists. Some industries where the PQ12 are in use include: prosthetics, robotics, medical, simulation.

The PQ12-R series of linear servos operate as a direct replacement for standard rotary servos. They use the same standard 3 wire connector, ground power and control. Regardless of how you drive your servos, be it with an RC receiver, an Arduino board, or a VEX micro-controller, the PQ12-R servo will function in place of a regular servo, but with the added benefit of providing linear motion. The PQ12-R is available in a 20mm stroke coupled with gear ratio options of 30:1, 63:1 and 100:1 cover a large variety of applications.

The PQ12-100-6-R has: a 100:1 gear ratio for maximum lifting force; 6VDC operating voltage; and a servo (PWM) interface. This powerful little actuator can lift 50N (~5kg)!

The datasheet doesn't mention a minimum operating voltage, but we've tested this actuator at 5VDC and it seems to work just fine. The maximum force and movement speed are reduced of course.

Gearing Option: 100:1
Peak Power Point: 40N @ 6mm/s
Peak Efficiency Point: 20N @ 8mm/s
Max Speed (no load): 10mm/s
Max Force (lifted): 50N
Max Side Load: 10N
Back Drive Force: 35N
Stroke: 20 mm
Input Voltage: 6 VDC
Stall Current: 550mA @ 6V
Mass: 22g
Operating Temperature -10°C to +50°C
Positional Repeatability: ±0.1mm
Mechanical Backlash: 0.25 mm
Audible Noise: 55dB @ 45cm
Ingress Protection: IP-54
Maximum Duty Cycle: 20%
PWM (Servo) signal:
- Fully retracted: 2.0ms @ 50Hz
- Fully extended: 1.0ms @ 50Hz

Documents

Product Comments

Start the conversation

Exact shipping can be calculated on the view cart page (no login required).

Products that weigh more than 0.5 KG may cost more than what's shown (for example, test equipment, machines, >500mL liquids, etc).

We deliver Australia-wide with these options (depends on the final destination - you can get a quote on the view cart page):

$3+ for Stamped Mail (typically 10+ business days, not tracked, only available on selected small items)
$7+ for Standard Post (typically 6+ business days, tracked)
$11+ for Express Post (typically 2+ business days, tracked)
Pickup - Free! Only available to customers who live in the Newcastle region (must order online and only pickup after we email to notify you the order is ready). Orders placed after 2PM may not be ready until the following business day.

Non-metro addresses in WA, NT, SA & TAS can take 2+ days in addition to the above information.

Some batteries (such as LiPo) can't be shipped by Air. During checkout, Express Post and International Methods will not be an option if you have that type of battery in your shopping cart.

International Orders - the following rates are for New Zealand and will vary for other countries:

$12+ for Pack and Track (3+ days, tracked)
$16+ for Express International (2-5 days, tracked)

If you order lots of gear, the postage amount will increase based on the weight of your order.

Our physical address (here's a PDF which includes other key business details):

Unit 18, 132 Garden Grove Parade
Adamstown
NSW, 2289
Australia

Take a look at our customer service page if you have other questions such as "do we do purchase orders" (yes!) or "are prices GST inclusive" (yes they are!). We're here to help - get in touch with us to talk shop.

Have a product question? We're here to help!