xTool Selected Valved N95 Respirator Mask (50pcs)

Fine particulate is the unavoidable by-product of cutting, welding and machining - and a respirator only helps if it is comfortable enough that you actually keep it on.

These cup-style masks filter at least 95% of non-oil-based particulates across four bonded layers. A non-woven polypropylene outer blocks dust, a dual-layer polypropylene filter captures fine particles, an activated carbon layer takes on the odours and gases that come with scorched acrylic, MDF and welding flux, and a skin-friendly inner layer sits against the face.

The one-way exhalation valve is what makes the difference on a long job. It vents warm, humid air straight out rather than forcing it back around the seal, which lowers breathing resistance and keeps humidity down inside the mask - so safety glasses and laser goggles stop fogging. An adjustable nose clip backed by a foam nose piece closes the seal across the bridge of the nose, and the stretchable woven headband holds position without pinching.

Sold as a box of 50.

Features

• Filters ≥95% of non-oil-based particulate, keeping laser cutting, CNC and welding by-products out of your airway
• One-way exhalation valve vents humid air, cutting breathing resistance and stopping goggles and safety glasses from fogging up mid-job
• Activated carbon layer absorbs odours and harmful gases, not just particulate — useful when cutting acrylic and MDF
• Adjustable nose clip and foam nose piece close the seal across the bridge of the nose, where cup masks most often leak
• Stretchable woven headband holds the mask in position through extended wear without digging in
• Sized and specified by xTool as the companion respirator for the MetalFab Laser Welder and CNC Cutter, and equally at home at any workshop bench

What's Included

• 50x xTool Selected valved N95 respirator mask