Single CR2032 / 20mm Coin Cell Battery Holder with Switch

Rating:
100% of 100
SKU: ADA4856 Brand: Adafruit
This tiny coin cell battery holder is ideal for small portable or wearable projects. It holds one 20mm coin cell (also known as CR2032) in series to generate 3V nominal. 20mm coin cells are popular as they are used in keychain lights and remotes, so they are easy to get and fairly low cost. They tend to have about 220mAh capacity.
$2.15 AUD, inc GST
$1.95 AUD, exc GST

In stock, ships same business day if ordered before 2PM
Delivered by Mon, 18th of Nov

Quantity Discounts:

  • 10-25 $1.87 (exc GST)
  • 25+ $1.82 (exc GST)

Restrictions apply to this equipment as it uses button/coin cell batteries:

  • The equipment is intended to be used in trades, professions or industries
  • The equipment is not intended for sale to the general public
  • The equipment is not intended to be used where children are present
  • You are aware that this equipment may not meet child safety testing requirements as it is not intended to be used by consumers or general public, but rather, is intended to be used in trades, professions or industries in conjunction with the limitations and restrictions listed above
  • You are aware that these restrictions are due to a change in Australian legislation in 2022 for button/coin cell batteries

Button Battery Warning

A declaration of use will need to be submitted during checkout.

- +

27 from local stock, 1 supplier stock; your order will dispatch between Dec 1 to Dec 10. And yes, stock levels and lead times are accurate!

Shipping:

  • $7+ Standard (5+ days*, tracked)
  • $11+ Express (2+ days*, tracked)
  • FREE Pickup (Newcastle only - must order online*)

Shipping costs may increase for heavy products or large orders.

Exact shipping can be calculated on the view cart page.

*Conditions apply, see shipping tab below.

This tiny coin cell battery holder is ideal for small portable or wearable projects. It holds one 20mm coin cell (also known as CR2032) in series to generate 3V nominal. 20mm coin cells are popular as they are used in keychain lights and remotes, so they are easy to get and fairly low cost. They tend to have about 220mAh capacity.

The holder is made of plastic and fastens with two small plastic snaps. There is a 13cm-long plain wire on the end, for easy attachment or soldering to whatever circuitry you wish to power.

We also have a version with 2 battery slots for a nominal 6V

Technical Specifications

  • Weight: 3.2g when empty, 5.4g with CR2032 battery installed
  • Size: 34.2mm x 24mm x 6.2mm
  • ~5" long (~13cm) wires

This product is listed in:

Power & Batteries>Battery Holders

Product Comments

Exact shipping can be calculated on the view cart page (no login required).

Products that weigh more than 0.5 KG may cost more than what's shown (for example, test equipment, machines, >500mL liquids, etc).

We deliver Australia-wide with these options (depends on the final destination - you can get a quote on the view cart page):

  • $3+ for Stamped Mail (typically 10+ business days, not tracked, only available on selected small items)
  • $7+ for Standard Post (typically 6+ business days, tracked)
  • $11+ for Express Post (typically 2+ business days, tracked)
  • Pickup - Free! Only available to customers who live in the Newcastle region (must order online and only pickup after we email to notify you the order is ready). Orders placed after 2PM may not be ready until the following business day.

Non-metro addresses in WA, NT, SA & TAS can take 2+ days in addition to the above information.

Some batteries (such as LiPo) can't be shipped by Air. During checkout, Express Post and International Methods will not be an option if you have that type of battery in your shopping cart.

International Orders - the following rates are for New Zealand and will vary for other countries:

  • $12+ for Pack and Track (3+ days, tracked)
  • $16+ for Express International (2-5 days, tracked)

If you order lots of gear, the postage amount will increase based on the weight of your order.

Our physical address (here's a PDF which includes other key business details):

Unit 18, 132 Garden Grove Parade
Adamstown
NSW, 2289
Australia

Take a look at our customer service page if you have other questions such as "do we do purchase orders" (yes!) or "are prices GST inclusive" (yes they are!). We're here to help - get in touch with us to talk shop.

Have a product question? We're here to help!

Write Your Own Review

Videos

View All

Guides

Control Multiple Fully-Addressable WS2812B RGB LED Strips with a Raspberry Pi Single Board Computer

This is an update to an older guide done so that we can provide you with the fastest, most modern, ...
This is an update to an older guide done so that we can provide you with the fastest, most modern, ...

WS2812 / NeoPixel Addressable LEDs: Arduino Quickstart Guide

This tutorial is aimed at getting some instant gratification from your WS2812 LEDs (also known as Ne...
This tutorial is aimed at getting some instant gratification from your WS2812 LEDs (also known as Ne...

WS2812 / NeoPixel Addressable LEDs: Raspberry Pi Quickstart Guide

--- NEW UPDATED GUIDE CLICK HERE ---This tutorial is aimed at getting some instant gratification fr...
--- NEW UPDATED GUIDE CLICK HERE ---This tutorial is aimed at getting some instant gratification fr...

WS2812 / NeoPixel Addressable LEDs: Particle Quickstart Guide

This tutorial is aimed at getting some instant gratification from your WS2812 LEDs (trade name: NeoP...
This tutorial is aimed at getting some instant gratification from your WS2812 LEDs (trade name: NeoP...

Projects

Wireless QI Phone Charger Powered by Raspberry Pi

I have a new phone and want the battery health to last as long as possible. Charging it to 100% ove...
I have a new phone and want the battery health to last as long as possible. Charging it to 100% ove...

Control Multiple Fully-Addressable WS2812B RGB LED Strips with a Raspberry Pi Single Board Computer

This is an update to an older guide done so that we can provide you with the fastest, most modern, ...
This is an update to an older guide done so that we can provide you with the fastest, most modern, ...

WLED Phone App | Control Addressable LEDs with an ESP32 or ESP8266

Today will be all about controlling Fully Addressable LED Lights using any Espressif ESP32 Dev...
Today will be all about controlling Fully Addressable LED Lights using any Espressif ESP32 Dev...
Feedback

Please continue if you would like to leave feedback for any of these topics:

  • Website features/issues
  • Content errors/improvements
  • Missing products/categories
  • Product assignments to categories
  • Search results relevance

For all other inquiries (orders status, stock levels, etc), please contact our support team for quick assistance.

Note: click continue and a draft email will be opened to edit. If you don't have an email client on your device, then send a message via the chat icon on the bottom left of our website.

Makers love reviews as much as you do, please follow this link to review the products you have purchased.