RP2040 Stamp Carrier

SKU: SP012 Brand: Pimoroni

A reference design for the RP2040 Stamp, also a full-fledged RP2040 Uno form-factor development board! The Carrier is a reference design for the RP2040...

$17.75 AUD, inc GST

$16.14 AUD, exc GST

Available with a lead time
Expect dispatch between Apr 10 and Apr 15

Quantity Discounts:

10+ $15.49 (exc GST)
25+ $15.01 (exc GST)

A reference design for the RP2040 Stamp, also a full-fledged RP2040 Uno form-factor development board!

The Carrier is a reference design for the RP2040 Stamp. It comes with a combo SMD/TH Stamp footprint, you can solder the Stamp directly to the Carrier or use 2mm pin headers + sockets to be able to plug it in and out.

The Carrier extends the functionality of the Stamp by adding a BOOTSEL button, LiPo and Qwiic connectors, USR and PWR LEDs, an SWD header, and a USB Type-C connector.

The board can be powered from the LiPo, over USB, or with a DC jack.

By using the RP2040 Stamp Carrier, you get everything that comes with the Stamp itself:

8MB of FLASH
500mA 3.3V LDO
A Neopixel
LiPo supply and charging circuit (with charging LED)
A reset button
12MHz crystal

On top of that you get:

A bootsel button
3.7/4.2V LiPo connector
Qwiic connector
USR LED
Power (3.3V) LED
SWD header
USB Type-C connector
DC Jack

The DC Jack input is center-positive and supports voltages in the range of 7-12V. If you have the LiPo and either DC or USB connected, the battery will begin charging.

The board follows the Uno shield pinout, making it compatible with a large ecosystem of shields, as long as they work on 3.3V IOs. The pins are not 5V-tolerant.

The SWD header follows the Cortex 10-pin standard.

The CircuitPython firmware for the RP2040 Stamp comes with a built-in board file for the Carrier, you can access it using import stamp_carrier_board as board. After that, you can access all the Carrier pins and interfaces like you would with any other CPY board.

Specs and Docs

Product Comments

Start the conversation

Exact shipping can be calculated on the view cart page (no login required).

Products that weigh more than 0.5 KG may cost more than what's shown (for example, test equipment, machines, >500mL liquids, etc).

We deliver Australia-wide with these options (depends on the final destination - you can get a quote on the view cart page):

$3+ for Stamped Mail (typically 10+ business days, not tracked, only available on selected small items)
$7+ for Standard Post (typically 6+ business days, tracked)
$11+ for Express Post (typically 2+ business days, tracked)
Pickup - Free! Only available to customers who live in the Newcastle region (must order online and only pickup after we email to notify you the order is ready). Orders placed after 2PM may not be ready until the following business day.

Non-metro addresses in WA, NT, SA & TAS can take 2+ days in addition to the above information.

Some batteries (such as LiPo) can't be shipped by Air. During checkout, Express Post and International Methods will not be an option if you have that type of battery in your shopping cart.

International Orders - the following rates are for New Zealand and will vary for other countries:

$12+ for Pack and Track (3+ days, tracked)
$16+ for Express International (2-5 days, tracked)

If you order lots of gear, the postage amount will increase based on the weight of your order.

Our physical address (here's a PDF which includes other key business details):

40 Aruma Place
Cardiff
NSW, 2285
Australia

Take a look at our customer service page if you have other questions such as "do we do purchase orders" (yes!) or "are prices GST inclusive" (yes they are!). We're here to help - get in touch with us to talk shop.

Have a product question? We're here to help!