Polymaker PolyDissolve S1 0.75Kg 3mm

SKU: CE05091 Brand: Polymaker Guides (1)
PolyDissolve™ S1 is a water dissolvable support for PLA, TPU, PVB and Nylon based filaments from Polymakers portfolio. It is specifically engineered to have a perfect interface with these materials while also displaying good solubility.
$96.95 AUD, inc GST
$88.14 AUD, exc GST

Quantity Discounts:

  • 3-5 $87.25 (exc GST)
  • 5+ $86.37 (exc GST)
  • 10+ $85.49 (exc GST)

Out of Stock

Sign up to get notified when it's available to order.

0 from local stock, 1 supplier stock; your order will dispatch between Dec 1 to Dec 10. And yes, stock levels and lead times are accurate!

Favourite product

Shipping:

  • $6+ Standard (5+ days*, tracked)
  • $10+ Express (2+ days*, tracked)
  • FREE Pickup (Newcastle only - must order online*)

Shipping costs may increase for heavy products or large orders.

Exact shipping can be calculated on the view cart page.

*Conditions apply, see shipping tab below.

PolyDissolve™ S1 is a water dissolvable support for PLA, TPU, PVB and Nylon based filaments from Polymakers portfolio. It is specifically engineered to have a perfect interface with these materials while also displaying good solubility.

Features

  • Complex Geometry - PolyDissolve™ S1 is a preferable solution when printing complex geometries, overhangs, internal cavities and complicated structures. It liberates you from support removal problems, and enables greater design freedom.
  • Wide material support - PolyDissolve™ S1 is engineered to have a good adhesion and perfect interface with a variety of supported materials from Polymaker including Nylon, PLA, TPU and PVB.
  • Water Soluble - Optimized to dissolve in water, supports printed in PolyDissolve™ S1 will dissolve in tap water. Safe and easily accessible!
  • Improved surface quality - Greatly improve the surface quality where supports interface with your prints when using PolyDissolve™ S1.
  • ​Quality Control - Polymakers leading quality control process and rigorous in-house testing, ensure reliable printing and consistency across spools and batches.

Specifications

Print Settings

  • Nozzle Temperature: 215˚C – 225˚C
  • Printing Speed: 20mm/s – 40mm/s
  • Bed Temperature: 25˚C – 60˚C
  • Bed Surface: Glass with glue, Blue Tape
  • Cooling Fan: ON

Material Compatibility

  • PLA based material from Polymaker’s portfolio + +
  • PVB based material from Polymaker’s portfolio + +
  • TPU based material from Polymaker’s portfolio + +
  • Nylon based material from Polymaker’s portfolio + +
  • PETG based material from Polymaker’s portfolio +
  • ABS based material from Polymaker’s portfolio – –
  • PC based material from Polymaker’s portfolio – –

+ + support the model very well
+ generally support the model depending on its geometry
– generally doesn’t support the model depending on its geometry
– – do not support the model

Notes

Product Comments

Exact shipping can be calculated on the view cart page (no login required).

Products that weigh more than 0.5 KG may cost more than what's shown (for example, test equipment, machines, >500mL liquids, etc).

We deliver Australia-wide with these options (depends on the final destination - you can get a quote on the view cart page):

  • $3+ for Stamped Mail (typically 10+ business days, not tracked, only available on selected small items)
  • $6+ for Standard Post (typically 6+ business days, tracked)
  • $10+ for Express Post (typically 2+ business days, tracked)
  • Pickup - Free! Only available to customers who live in the Newcastle region (must order online and only pickup after we email to notify you the order is ready). Orders placed after 2PM may not be ready until the following business day.

Non-metro addresses in WA, NT, SA & TAS can take 2+ days in addition to the above information.

Some batteries (such as LiPo) can't be shipped by Air. During checkout, Express Post and International Methods will not be an option if you have that type of battery in your shopping cart.

International Orders - the following rates are for New Zealand and will vary for other countries:

  • $11+ for Pack and Track (3+ days, tracked)
  • $16+ for Express International (2-5 days, tracked)

If you order lots of gear, the postage amount will increase based on the weight of your order.

Our physical address (here's a PDF which includes other key business details):

Unit 18, 132 Garden Grove Parade
Adamstown
NSW, 2289
Australia

Take a look at our customer service page if you have other questions such as "do we do purchase orders" (yes!) or "are prices GST inclusive" (yes they are!). We're here to help - get in touch with us to talk shop.

Have a product question? We're here to help!

Write Your Own Review

Videos

View All

Guides

3D Printing Better Print-in-Place Mechanisms

Print-in-Place mechanism is one of the special things about additive manufacturing that all other ma...
Print-in-Place mechanism is one of the special things about additive manufacturing that all other ma...

More Exciting Features - Ultimaker Cura

Cura is constantly being improved upon and half the fun is keeping on top of all the new changes and...
Cura is constantly being improved upon and half the fun is keeping on top of all the new changes and...

3D Printing Onto Fabrics

One of the swell things about 3D printers is being able to lay fabric onto a build plate and create ...
One of the swell things about 3D printers is being able to lay fabric onto a build plate and create ...

Unleash your creativity: 3D Printing with Soluble Supports

Recently, we got a brand new Dual Extruder v3 Tool Head from LulzBot and took a dive into the design...
Recently, we got a brand new Dual Extruder v3 Tool Head from LulzBot and took a dive into the design...

Projects

BuzzBox

Do you ever wanna pump up some tunes but you don't know how to play a MIDI file? Fear not, the Piico...
Do you ever wanna pump up some tunes but you don't know how to play a MIDI file? Fear not, the Piico...

Concrete Lamp

The concrete body of the lamp (which, to my eye look a bit like a leek) is made is two halves. The 1...
The concrete body of the lamp (which, to my eye look a bit like a leek) is made is two halves. The 1...

The Hipster Coaster

We wanted to make a interactive display of the fun that can be had with DIY projects to take to Sydn...
We wanted to make a interactive display of the fun that can be had with DIY projects to take to Sydn...

Educational Workshops

3D Printing (FFF) Workshop

Welcome to the 3D Printing Workshop! I'm Aidan from Core Electronics and in this workshop we are g...
Welcome to the 3D Printing Workshop! I'm Aidan from Core Electronics and in this workshop we are g...
Feedback

Please continue if you would like to leave feedback for any of these topics:

  • Website features/issues
  • Content errors/improvements
  • Missing products/categories
  • Product assignments to categories
  • Search results relevance

For all other inquiries (orders status, stock levels, etc), please contact our support team for quick assistance.

Note: click continue and a draft email will be opened to edit. If you don't have an email client on your device, then send a message via the chat icon on the bottom left of our website.

Makers love reviews as much as you do, please follow this link to review the products you have purchased.