Search results for: 'y splitter cable'

This USB A to B cable is perfect for connecting microcontrollers to your PC, with a strong braided cable it is sure to last through many projects.

This USB A to mini B cable is perfect for connecting microcontrollers to your PC, with a strong braided cable it is sure to last through many projects.

This 6" (15cm) cable has two 26AWG conductors with a 2.5mm-pitch 2-pin female JST XH-style connector. The spacing is very close to 0.1", which means this connector will work with 0.1" male header pins and standard perfboards and solderless breadboards. The other ends of the wires are unterminated; they can be cut to length to match your application. The red and black wires are twisted together to reduce noise.

This USB A to micro B cable is perfect for connecting microcontrollers to your PC, with a strong braided cable it is sure to last through many projects.

Use this Mini HDMI Male to HDMI Male Adapter Cable to connect your Mini HDMI device with a standard HDMI interface! It can transfer digital video and audio to a...

Double up your power adapters with this wonderfully simple 2-way power jack splitter. All you have to do is connect a standard 5.5mm/2.1mm sized plug into one end...

This is a 150mm long single, female XT60 conector that splits off to two male XT30 connectors

Power over Ethernet (PoE) splitters can make your project wiring a breeze - and best of all they work to connect any 802.3af-capable router to any Ethernet device, even if it doesn't natively support PoE! The splitter takes a unified PoE signal (data and power) from one RJ-45 cable, and then separates the data (Ethernet) and power (5 VDC regulated) into two different lines for non-PoE devices.

Enables you to connect two USB devices together that each have a Type A Female

3.5mm Stereo plug - 2 x 3.5mm socket (Y lead), 30cm long

This 500 mm Y-cable is typically used to connect two servos to a single servo port on an RC receiver or servo controller.

This 12-inch (300-mm), flat Y-cable is typically used to connect two servos to a single servo port . It has 22-AWG wires terminated on one end by a “JR”-style female connector and on the other by two Futaba J male connectors, allowing it to work in either system or as an adapter between systems. The split occurs close to the cable’s JR input, so the two male ends can be separated by up to approximately 18" (450 mm). The cable’s conductors each consist of 60 strands, making it more flexible than standard servo cables.

Quadruple your power adapters with this wonderfully simple 4-way power jack splitter. All you have to do is connect a standard 5.5mm/2.1mm sized plug into one end...

This 12-inch (300-mm), flat Y-cable can be used to split a single RC hobby servo signal into two identical outputs. It has 22-AWG wires terminated on all three ends by “JR”-style female connectors, which are compatible with 0.1" header bins and both male JR and male Futaba J connectors. The split occurs close to the cable’s input, so the two output ends can be separated by up to approximately 18" (450 mm). The cable’s conductors each consist of 60 strands, making it more flexible than standard servo cables.

This 12-inch (300-mm), twisted Y-cable can be used to split a single RC hobby servo signal into two identical outputs. It has 22-AWG wires terminated on all three ends by “JR”-style female connectors, which are compatible with 0.1" header bins and both male JR and male Futaba J connectors. The split occurs close to the cable’s input, so the two output ends can be separated by up to approximately 18" (450 mm). The cable’s conductors each consist of 60 strands, making it much more flexible than standard servo cables, and the wires are twisted to reduce electromagnetic interference (EMI).

If you want to connect multiple EL wires/strips/panels up to one inverter, these splitters are quite useful. There is one male connector (goes to the inverter) and...

This 3.5mm stereo to 2 RCA cable is ideal for connecting the output of your cell phone, iPod, Mp3 player, Tablet or PC to your home audio system, while most mobile devices use the 3.5mm stereo headphone output, most home audio systems with an amplifier or receiver use RCA jacks for audio inputs.

This Mini-USB cable is six feet long (1.8 m) and has a male Type-A connector on one end and a male Mini-B connector on the other. This cable works with high-speed USB devices.

This cable is easy to understand - you get a 3.5mm mono audio jack on one end, and two alligator clips on the other. It's also really easy to use, perfect for clipping...