Search results for: 'power harness'

The Outlaw Chassis Kit is the tank track base you've been waiting for! It uses goBILDA Badlands Tank Tracks which are crazy robust and feature bonded rubber for fantastic traction

This is a 150mm long single, female XT30 conector that splits off to two male XT30 connectors

This 300mm length wire harness conveys power from an XT90 input to two XT30 outputs.

This 300mm length wire harness breaks out power from a XT90 input between two XT90 outputs. ...

This 150mm Length XT90 to XT30 Y-Harness triples your XT90-to-XT30 possibilities by offering a way to split out the power from an XT90...

Ribbon cable is really helpful in situations where you need to make a lot of connections without a big mess of wires. Nothing makes a project look more finished than a nice clean wiring harness.

By popular demand, we now have rugged metal buttons with a full-color NeoPixel LED ring light! These chrome-plated metal buttons are rugged, but...

A 99.5:1 Ratio, 60RPM 5203 Series Yellow Jacket Gear Motor with Encoder

This is a simple to use motion sensor. Power it up and wait 1-2 seconds for the sensor to get a snapshot of the still room. If anything moves after that period, the ‘alarm’ pin will go low.

This gearmotor is a powerful 24V brushed DC motor with a 131.25:1 metal gearbox and an integrated quadrature encoder that provides a resolution of 64 counts per revolution of the motor shaft, which corresponds to 8400 counts per revolution of the gearbox’s output shaft. The gearbox is composed mainly of spur gears, but it features helical gears for the first stage for reduced noise and improved efficiency. These units have a 16 mm-long, 6 mm-diameter D-shaped output shaft. This gearmotor is also available without an encoder.

If you need to connect an RJ-45 cable (a.k.a Ethernet) to a board that doesn't have an Ethernet socket - this adapter will come in very handy!

This is a two-cell AA battery holder with 6" (~150mm) cable that has been terminated with a JST-PH connector.

This 600mm length servo Y-harness has a single TJC8 (MH-FC) connector on one end and a pair of TJC8 (FH-MC) connectors on the opposing...

This is a 150mm long single, female XT60 conector that splits off to two male XT30 connectors

This female barrel jack plug is great for adding a common connector to the end of wires. This jack is compatible with 5.5x2.1mm barrel connectors. The outer shell unscrews to reveal solder terminals and a crimp strain relief. The outer shell has strain relief as well.

A 99.5:1 Ratio, 60RPM 5204 Series Yellow Jacket Gear Motor with Encoder

This 450mm length servo Y-harness has a single TJC8 (MH-FC) connector on one end and a pair of TJC8 (FH-MC) connectors on the opposing...

This 300mm length servo Y-harness has a single TJC8 (MH-FC) connector on one end and a pair of TJC8 (FH-MC) connectors on the opposing...

This 150mm length servo Y-harness has a single TJC8 (MH-FC) connector on one end and a pair of TJC8 (FH-MC) connectors on the opposing...

By popular demand, we now have rugged metal buttons with a full-color NeoPixel LED ring light! These chrome-plated metal buttons are rugged, but...

The Servo Power Node can provide power distribution or isolation between your servos and other PWM controlled components, from the board or.....

This 150mm length Y-harness is handy to have when wiring motors in parallel. There is a pair of red MH-FC (Male Housing - Female Contact).....

These premium wires are stranded 26AWG wires with female terminals on one end and male terminals on the other end. Together with Pololu's 0.1" crimp connector housings, these wires can be used to make custom cables with 0.1" (2.54mm) connectors. These 6" (15 cm) wires have blue insulation and ship in packs of 10.