Search results for: 'usb to i2c'
Adafruit MCP2221A Breakout - General Purpose USB to GPIO ADC I2C - Stemma QT / Qwiic
Brand: Adafruit
Wouldn't it be cool to drive a tiny OLED display, read a color sensor, or even just flash some LEDs directly from your computer? Sure you can program an Arduino...
$12.30 AUD, inc GST
Adafruit FT232H Breakout - General Purpose USB to GPIO, SPI, I2C - USB C & Stemma QT
Brand: Adafruit
Wouldn't it be cool to drive a tiny OLED display, read a color sensor, or even just flash some LEDs directly from your computer? Sure you can program an Arduino...
$27.80 AUD, inc GST
USB To UART/I2C/SPI/JTAG Converter
Brand: Waveshare
USB To UART/I2C/SPI/JTAG Converter, Supports Multiple Interfaces, Compatible with 3.3V and 5V, Multiple Protection Circuits, Multiple Systems Support,...
$28.55 AUD, inc GST
Pololu Isolated USB-to-I²C Adapter with Isolated Power
Brand: Pololu
This USB-to-I²C adapter enables a PC or other USB host to act as the controller on an I²C bus, reading and writing data from I²C target devices connected...
$24.60 AUD, inc GST
Pololu Isolated USB-to-I²C Adapter
Brand: Pololu
This USB-to-I²C adapter enables a PC or other USB host to act as the controller on an I²C bus, reading and writing data from I²C target devices connected...
$19.45 AUD, inc GST
RP2040 Interfacer (UART/I2C)
Brand: The Pi Hut
The RP2040 Interfacer is a small low-cost USB to UART and I2C Adapter (both 3.3V) powered by an RP2040 microcontroller that plugs straight into a USB Type-A...
$11.65 AUD, inc GST
I2CDriver by Excamera Labs
Brand: Adafruit
I²CDriver is an easy-to-use, open source tool for controlling I²C devices and a great tool to help with quick driver development and debugging. It works with Windows...
$65.15 AUD, inc GST
I2CMini by Excamera Labs
Brand: Adafruit
I²CMini is an easy-to-use, open-source tool for controlling I²C devices over USB, 100% compatible with I²CDriver. Its a small friend that will make working with I2C a breeze, especially if they have a Qwiic/Stemma QT or even Grove I2C connector!
$31.95 AUD, inc GST
Jrk G2 21v3 USB Motor Controller with Feedback (Connectors Soldered)
Brand: Pololu
This compact motor controller makes closed-loop speed or position (but not both!) control of a brushed DC motor easy, with quick configuration over USB...
$92.85 AUD, inc GST
Similar matches
USB to TTL Serial UART RS232 Adaptor (PL2303TA)
Brand: Core Electronics
USB to TTL converters are essential for prototyping - they provide a direct interface with the target device. This module connects to your computer USB port and there are 4 wires which connect with your target device.
$5.65 AUD, inc GST
TCA9548A I2C Multiplexer
Brand: Adafruit
You just found the perfect I2C sensor, and you want to wire up two or three or more of them to your Arduino when you realize "Uh oh, this chip has a fixed I2C address...
$13.85 AUD, inc GST
ESP32-S3-Pico Microcontroller
Brand: Waveshare
ESP32-S3 Microcontroller, 2.4 GHz Wi-Fi Development Board, dual-core processor with frequency up to 240 MHz...
$15.05 AUD, inc GST
ESP32-S3 4.3inch Capacitive Touch Display Development Board
Brand: Waveshare
ESP32-S3 4.3inch Capacitive Touch Display Development Board, 800×480, 5-point Touch, 32-bit LX7 Dual-core Processor, Up to 240MHz Frequency, Supports WiFi...
$61.85 AUD, inc GST
Adafruit 16-Channel 12-bit PWM/Servo Driver - I2C interface - PCA9685
Brand: Adafruit
You want to make a cool robot, maybe a hexapod walker, or maybe just a piece of art with a lot of moving parts. Or maybe you want to drive a lot of LEDs with precise...
$26.80 AUD, inc GST
USB to TTL UART RS232 Serial Converter Module PL2303HXA
Brand: Core Electronics
USB to TTL converters are an essential for prototyping - they provide a direct interface with the target device. This module connects to your computer USB port and there are 4 wires which connect with your target device. This model is the bare version of our enclosed model.
$1.25 AUD, inc GST
Adafruit ESP32 Feather V2 - 8MB Flash + 2 MB PSRAM - STEMMA QT
Brand: Adafruit
One of our star Feathers is the Adafruit HUZZAH32 ESP32 Feather - with the fabulous ESP32 WROOM module on there,
$36.90 AUD, inc GST
Adafruit USB Type C Power Delivery Dummy - I2C or Switchable - HUSB238 - STEMMA QT / Qwiic
Brand: Adafruit
The HUSB238 USB PD sink chip is neat in that you can either use switches (really, resistor selection) to set the desired PD voltage or use I2C for dynamic...
$18.45 AUD, inc GST
Adafruit USB Type C Power Delivery Dummy Breakout - I2C or Fixed - HUSB238
Brand: Adafruit
The HUSB238 USB PD sink chip is neat in that you can either use jumpers (really, resistor selection) to set the desired PD voltage and current or you can...
$10.55 AUD, inc GST
Adafruit I2C to 8 Channel Solenoid Driver - STEMMA QT / Qwiic
Brand: Adafruit
Solenoids are a little like cats: if your project has one solenoid you'll probably stick with just one and in such cases our single MOSFET driver will...
$28.40 AUD, inc GST
USB to RS485 converter
Brand: Core Electronics
Featuring a MAX485 and CH340, this converter will take USB and turn it into an RS485 signal.
$1.80 AUD, inc GST
USB to RS485 Converter (FT232)
Brand: Core Electronics
Featuring a MAX485 and FTDI232, this converter will take USB and turn it into an RS485 signal.
$3.60 AUD, inc GST
Gravity: I2C HUB
Brand: DFRobot
This Gravity: I2C HUB module is designed to connect up to 8 I2C devices to a main-controller, which allows you easily to hook up multiple I2C devices in project...
$2.65 AUD, inc GST
I2C/TWI LCD2004 Module (Arduino/Gadgeteer Compatible)
Brand: DFRobot
I2C/TWI LCD2004 module compatible with Gadgeteer is a cool lcd display with a high speed I2C serial bus (400kHz) from DFRobot. With the limited pin resources, your project may be out of resources using normal LCD shield. The LCD display is a 4x20 character STN white display with a blue LED backlight.
$26.84 AUD, inc GST
Gravity: I2C 4-20mA DAC Module (Arduino Compatible)
Brand: DFRobot
This is an I2C DAC module that outputs 0-25mA current. It offers more accurate 4-20mA current output after calibration, which can be used with most 4-20mA...
$18.55 AUD, inc GST
CP2102N USB-to-Serial Adapter Carrier
Brand: Pololu
This USB-to-serial adapter lets you easily connect a TTL serial device to a PC by acting as a virtual serial port. The board is a Micro-USB carrier for ...
$25.05 AUD, inc GST
USB/Serial Converter - FT232RL
Brand: Adafruit
This USB cable adds a DB9 serial port to your computer or laptop. Works with MacOS X, Linux and Windows. Note that this provides (approximately) +-10V serial (RS232)...
$39.20 AUD, inc GST
I2C CAN-BUS Module based on MCP2551 and MCP2515
Brand: Seeed Studio
We launched the Serial CAN Bus Module years ago, which is very practical and easy to use. Now we have slightly modified the Serial CAN Bus...
$36.65 AUD, inc GST
Breakout Board for MCP4725 I2C DAC
Brand: Sparkfun
You’ve always wanted to output analog voltages from a microcontroller, the MCP4725 is the DAC that will let you do it! The MCP4725 is an I2C controlled Digital-to-Analog converter (DAC). A DAC allows you to send analog signal, such as a sine wave, from a digital source, such as the I2C interface on the Arduino microcontroller. Digital to analog converters are great for sound generation, musical instruments, and many other creative projects!
$11.55 AUD, inc GST
Waveshare 3.5inch HDMI Touch LCD IPS 640x480 (E)
Brand: Waveshare
Crisp 640×480 IPS touch in a 3.5-inch footprint, driven over plain HDMI - no GPIO pins used, and it works with any Pi, Jetson or PC.
$73.61 AUD, inc GST
Adafruit ANO Rotary Navigation Encoder to I2C Stemma QT Adapter - Pre-Soldered Encoder
Brand: Adafruit
The ANO rotary encoder wheel is a funky user interface element, reminiscent of the original clicking scroll wheel interface on the first iPods. It's a...
$24.80 AUD, inc GST
USB to Multi-Protocol Serial Cable - RS-232 / TTL UART / RS-485
Brand: Adafruit
No matter what serial-esque protocol you need to interface with, this USB to Multi-Protocol Serial adapter cable will be able to get...
$51.95 AUD, inc GST
Gravity: GP8413 2-Channel 15-bit I2C to 0-5V/10V DAC Module
Brand: DFRobot
High-resolution, high-precision, dual-channel DAC voltage module. Expandable to 16 output channels through I2C cascading...
$23.58 AUD, inc GST
Adafruit ISO1540 Bidirectional I2C Isolator - STEMMA QT / Qwiic
Brand: Adafruit
Sometimes you'll find yourself with an I2C bus controller on one side, and an I2C bus device on the other and you gotta keep em (electrically) separated. Maybe because one is Earth-grounded, maybe because you've got some funky power monitoring setup, maybe you want to reduce noise.
$17.25 AUD, inc GST
M5Stack ADC I2C Unit v1.1 (ADS1110)
Brand: M5Stack
A 16-bit self-calibrating analog-to-digital converter that operates on I2C
$11.95 AUD, inc GST
M5Stack DAC Converter Digital to Analog I2C Unit (MCP4725)
Brand: M5Stack
DAC, is a unit with the ability to convert digital signal to analog signal (voltage waveform signal) with support for audio waveform and more. It integrates a 12-bit high resolution DAC chip named MCP4725 which has an on-board non-volatile memory (EEPROM). The unit communicates with the M5Core using the I2C protocol.
$11.95 AUD, inc GST
Adafruit TCA4307 Hot-Swap I2C Buffer with Stuck Bus Recovery - STEMMA QT / Qwiic
Brand: Adafruit
The Adafruit TCA4307 Hot-Swap I2C Buffer breakout here solves that problem. It's specifically designed to take a non-hot-swap protocol (I2C) and protect the controller from wayward peripherals messing with the bus during attach/detach.
$8.80 AUD, inc GST
USB to TTL Serial Cable
Brand: Sparkfun
This is a USB to TTL Serial Cable which allows for a simple way to connect TTL interface devices to USB. The I/O pins of this cable are configured to operate at 3.3V specifically with a Raspberry Pi with each serial pin broken apart. Thanks to its separated pins, this cable is a perfect candidate for powering, connecting, and accessing the login and debug console on the Raspberry Pi.
$39.45 AUD, inc GST
LANA TNY - CH32V203 mini microcontroller board by PHVX BV
Brand: Adafruit
TNY is PHVX BV's take on our Adafruit QT Py and Seeed studio XIAO bite-sized development boards but with added SMD pins for optional extra IO...
$14.10 AUD, inc GST
Pololu I²C Isolator with Connectors, ISO1640
Brand: Pololu
This module enables galvanically isolated bidirectional I²C communication between two devices. The bidirectionality applies to both SDA and SCL, which...
$9.70 AUD, inc GST
Adafruit PC Joystick to seesaw I2C Adapter - STEMMA QT / Qwiic
Brand: Adafruit
Back in my day, we used to have these big chunky PC joysticks that would plug into the back of your PC. No, not through USB, they had a DE-15 port and...
$11.65 AUD, inc GST
Makers love reviews as much as you do, please follow this link to review the products you have purchased.