Search results for: 'sound level meter'
Gravity: Analog Sound Level Meter
Brand: DFRobot
This is an Arduino compatible sound level meter(also known as decibel meter, noise meter). It uses instrument circuit, low noise microphone, which make it accurately...
$66.25 AUD, inc GST
Pro Sounds Level Meter with Calibrator
This professional-grade sound level meter is designed for all kinds of environmental sound measurement projects. It features a wide dynamic range from 30dB to 130dB, fast (125ms) or slow (1s) time weighting to get an ambient reading or a short noise.
$394.95 AUD, inc GST
Electret Microphone Amplifier - MAX4466 with Adjustable Gain
Brand: Adafruit
Add an ear to your project with this well-designed electret microphone amplifier. This fully assembled and tested board comes with a 20-20KHz electret microphone...
$13.40 AUD, inc GST
Sound detection Sensor Module
Brand: Core Electronics
Detects sound that is greater than the ambient noise (adjustable sensitivity). Can operate from 3.3V to 5V.
$0.95 AUD, inc GST
Electret Microphone Amplifier - MAX9814 with Auto Gain Control
Brand: Adafruit
Add an ear to your project with this well-designed electret microphone amplifier with AGC. This fully assembled and tested board comes with a 20-20KHz electret microphone...
$14.30 AUD, inc GST
Analog Sound Sensor
Brand: DFRobot
This is an updated version of the Analog Sound Sensor. Analog Sound Sensor is typically used in detecting the loudness in ambient, the Arduino can collect its output signal by imitating the input interface.
$6.90 AUD, inc GST
Sound Detector
Brand: Sparkfun
The Sound Detector is a small and very easy to use audio sensing board with three different outputs. The Sound Detector not only provides an audio output, but also a binary indication of the presence of sound, and an analog representation of its amplitude. The 3 outputs are simultaneous and independent, so you can use as many or as few as you want at once.
$20.85 AUD, inc GST
Sound input module (4-pin)
Brand: Core Electronics
An all-in-one module for easily sensing sound!
$1.20 AUD, inc GST
Audio Analyzer
Brand: DFRobot
This module features the MSGEQ7 graphic equalizer display filter.It will give your arduino ears.
$30.75 AUD, inc GST
Grove - Loudness Sensor (Seeed Studio)
Brand: Seeed Studio
The Grove - Loudness Sensor is designed to detect the loudness of environmental sound. Based on amplifier LM2904 and a built-in microphone, it amplifies...
$11.05 AUD, inc GST
SparkFun Sound Detector (with Headers)
Brand: Sparkfun
The SparkFun Sound Detector is a small and very easy-to-use audio sensing board with three different outputs. The Sound Detector not only provides an audio output...
$23.25 AUD, inc GST
Similar matches
Piezo Buzzer
Brand: Core Electronics
Add a loud buzzer alarm or indicator to your projects. Drive this using PWM or code to switch between 0 and 3-5V for loud output.
$0.34 AUD, inc GST
Active Buzzer (5V)
Brand: Core Electronics
Apply a voltage and hear a tone! This active buzzer doesn't require any external circuitry like a passive buzzer.
$0.38 AUD, inc GST
Mute Sounds Mini Submersible Pump DC 3V-5V
Brand: Core Electronics
This small water pump is submersible, runs on 3-4.5VDC and can move 100 Liters per hour. Perfect for small projects where you need to get water from A to B.
$1.70 AUD, inc GST
Piezo Buzzer - PS1240
Brand: Adafruit
Piezo buzzers are used for making beeps, tones and alerts. This one is petite but loud! Drive it with 3-30V peak-to-peak square wave. To use, connect one pin to...
$3.05 AUD, inc GST
Thin Speaker - 4 Ohm, 2.5W, 28mm
Brand: Sparkfun
Upgrade your sound system with our Thin Speaker! Measuring just 28mm, this 4 Ohm, 2.5W speaker is sleek and powerful. Perfect for any DIY audio project.
$3.75 AUD, inc GST
Mini Metal Speaker w/ Wires - 8 ohm 0.5W
Brand: Adafruit
Listen up! This tiny 1" diameter speaker cone is the perfect addition to any small audio project where you need an 8 O impedance and will be using 0.5W or less of...
$3.95 AUD, inc GST
Digital Buzzer Module
Brand: DFRobot
Buzz! Buzz! The buzzer module makes sound for your project.
$3.45 AUD, inc GST
Small Enclosed Piezo w/Wires
Brand: Adafruit
This small (14mm diameter) piezo element is nicely enclosed so you can attach easily. Piezo elements convert vibration to voltage or voltage to vibration. That means...
$1.80 AUD, inc GST
Through-Hole Speaker
Brand: Sparkfun
This is a small 15mm round speaker that operates around the audible 2kHz range...
$5.60 AUD, inc GST
3W Mini Audio Stereo Amplifier (W2.54)
Brand: DFRobot
This is a Mini Audio Stereo Amplifier from DFRobot. It has left and right channels that can realize stereo surround sound. The module has a mini body and 2.54mm...
$9.90 AUD, inc GST
Adjustable Dual Channel Audio Amplifier
Brand: Core Electronics
Pump up the tunes!! Use this feature-packed audio amplifier to bring a whole new sense to your projects.
$1.95 AUD, inc GST
Thin Speaker - 0.5W
Brand: Sparkfun
If you want to get some sound out of your project but have a tight space budget, this is a good way to do it. This 0.5W, 8Ohm speaker is only 40mm in diameter and...
$2.65 AUD, inc GST
Medium Surface Transducer with Wires - 4 Ohm 3 Watt
Brand: Adafruit
Turn any surface/wall/table etc into a speaker with a surface transducer. This type of speaker does not have a moving cone like most speakers you've seen. Instead...
$28.20 AUD, inc GST
Thin Plastic Speaker w/Wires - 8 ohm 0.25W
Brand: Adafruit
Listen up! This 1.5" diameter speaker cone is the perfect addition to any audio project where you need an 8O impedance and are using 0.25W of power. The speakers...
$3.80 AUD, inc GST
Large Piezo Alarm - 16 Tone
Brand: Sparkfun
This Piezo Alarm is a great option for when you need an audible alarm (or are just looking for a way to prank your friends). This alarm has 16 different output options...
$15.30 AUD, inc GST
Audio Amplifier Module with Speaker for Arduino
An easy way to add audio effects or music to your next project. The compact board measures just 47mmm long and features a 23mm diameter speaker, 2W amplifier, and a trimpot for volume control. Powered from 5V.
$11.95 AUD, inc GST
Speaker - 0.5W (8 ohm)
Brand: Sparkfun
A small audio speaker that is ideal for radio and amplifier projects and is small enough to fit in robot projects.
$7.35 AUD, inc GST
Large Surface Transducer with Wires - 4 Ohm 5 Watt
Brand: Adafruit
Turn any surface/wall/table etc into a speaker with a surface transducer. This type of speaker does not have a moving cone like most speakers you've seen. Instead...
$48.05 AUD, inc GST
386AMP audio amplifier Module (Arduino compatible)
Brand: DFRobot
This DFRobot 386AMP audio amplifier module uses the National Semiconductor LM386 audio power amplifier chip. It has 20 voltage gain.
$20.70 AUD, inc GST
Makers love reviews as much as you do, please follow this link to review the products you have purchased.