Search results for: 'rubber pad'
Silicone Heat Mat
Brand: Core Electronics
Keep your workbench burn and flux-free with a silicon heat mat!
$14.40 AUD, inc GST
Little Rubber Bumper Feet - Pack of 4
Brand: Adafruit
Keep your electronics from going barefoot, give them little rubber feet! These small sticky bumpers are Adafruit's favorite accessory for any electronic kit or device...
$1.90 AUD, inc GST
Silicone Bumpers - 5x11mm (4 Pack)
Brand: Sparkfun
Protect your board or project with this four pack of silicone bumpers! Rubber feet raise your PCB or project up off your desk. This helps prevent short circuiting...
$1.90 AUD, inc GST
12mm Tall Rubber Foot (1-1) - 8 Pack
Brand: goBilda
This is an 8 Pack of 12mm tall Rubber Feet
$6.20 AUD, inc GST
Rubber Feet (Pack of 100)
Brand: Core Electronics
Keep your projects from sliding around your workbench with some Rubber Feet!
$20.40 AUD, inc GST
Silicone Bumpers - Large (10x16.5mm, 4 pack)
Brand: Sparkfun
Rubber feet raise your PCB or project up off your desk. This helps prevent short circuiting from bits of scrap wire floating about or setting a project down on a conductive surface. They also prevent your enclosure or PCB from sliding around. They can also be used as feet for enclosures. These are self-adhesive and 16.5mm in diameter and about 10mm tall. They taper to roughly 12mm at the top. They come in a set of 4.
$2.30 AUD, inc GST
Silver Anodized Aluminum Bumper Feet - Pack of 2
Brand: Adafruit
Keep your electronics from going barefoot, and give them sleek cyberpunk metal feet! These aluminum bumpers are originally designed for keyboard enclosures that are made of anodized aluminum with a black rubber nubbin embedded inside for no-slip support. They're so cool looking we figure they could be your new favorite accessory.
$16.90 AUD, inc GST
Rubber Slide Potentiometer Nubbin - Pack of 3
Brand: Adafruit
We dig the lil' rubber nubbin on the popular 75mm long 10KΩ slide potentiometer so much, we thought folks might like a pack of three for their...
$1.80 AUD, inc GST
Red Anodized Aluminum Bumper Feet - Pack of 2
Brand: Adafruit
Keep your electronics from going barefoot, and give them sleek cyberpunk metal feet! These aluminum bumpers are originally designed for keyboard enclosures that are made of anodized aluminum with a black rubber nubbin embedded inside for no-slip support. They're so cool looking we figure they could be your new favorite accessory.
$16.80 AUD, inc GST
Purple Anodized Aluminum Bumper Feet - Pack of 2
Brand: Adafruit
Keep your electronics from going barefoot, and give them sleek cyberpunk metal feet! These aluminum bumpers are originally designed for keyboard enclosures that are made of anodized aluminum with a black rubber nubbin embedded inside for no-slip support. They're so cool looking we figure they could be your new favorite accessory.
$16.80 AUD, inc GST
PanaVise Neoprene Pads - 204
Brand: PanaVise
Protect the finish of your project with these add-on Jaw Pads. For for 201, 203, 207 and 209
$9.70 AUD, inc GST
Insulated Silicone Rework Mat - 34cm x 23cm x 4mm Work Surface
Brand: Adafruit
This silicone mat is made of 4mm thick rubber and can take just about anything you throw at it. It's stable, strong, non-slip, non-conductive and heat-resistant...
$49.05 AUD, inc GST
PanaVise Vacuum Base Repair Kit - 380-RK
Brand: PanaVise
Repair your torn or damaged vacuum base pad!
$27.90 AUD, inc GST
Black Anodized Aluminum Bumper Feet - Pack of 2
Brand: Adafruit
Keep your electronics from going barefoot, and give them sleek cyberpunk metal feet! These aluminum bumpers are originally designed for keyboard enclosures that are made of anodized aluminum with a black rubber nubbin embedded inside for no-slip support. They're so cool looking we figure they could be your new favorite accessory.
$16.80 AUD, inc GST
Blue Anodized Aluminum Bumper Feet - Pack of 2
Brand: Adafruit
Keep your electronics from going barefoot, and give them sleek cyberpunk metal feet! These aluminum bumpers are originally designed for keyboard enclosures that are made of anodized aluminum with a black rubber nubbin embedded inside for no-slip support. They're so cool looking we figure they could be your new favorite accessory.
$16.80 AUD, inc GST
Gray Anodized Aluminum Bumper Feet - Pack of 2
Brand: Adafruit
Keep your electronics from going barefoot, and give them sleek cyberpunk metal feet! These aluminum bumpers are originally designed for keyboard enclosures that are made of anodized aluminum with a black rubber nubbin embedded inside for no-slip support. They're so cool looking we figure they could be your new favorite accessory.
$16.85 AUD, inc GST
Green Anodized Aluminum Bumper Feet - Pack of 2
Brand: Adafruit
Keep your electronics from going barefoot, and give them sleek cyberpunk metal feet! These aluminum bumpers are originally designed for keyboard enclosures that are made of anodized aluminum with a black rubber nubbin embedded inside for no-slip support. They're so cool looking we figure they could be your new favorite accessory.
$16.80 AUD, inc GST
Raspberry Pi 3 Model B+ Enclosure (Official)
Brand: Raspberry Pi
If your Pi is in need of a safe place to chill out and look fantastic at the same time, then look no further than the official case/enclosure by the Raspberry Pi Foundation.
$12.50 AUD, inc GST
FLIRC Raspberry Pi 4 Case
Brand: FLIRC
The perfect home for your new Raspberry Pi 4. We will ensure our case is adjusted to fit the latest Raspberry Pi specifications. Our case is made of a beautiful aluminum core heat sink that is sandwiched between two black, soft touch shells that feel amazing in your hands. But once it's out of your hands, it blends in with your entertainment system.
$24.95 AUD, inc GST
Raspberry Pi 3 Model B+ Enclosure - Black (Official)
Brand: Raspberry Pi
The same official case for your Raspberry Pi 3B+ now comes in Black!
$11.35 AUD, inc GST
Double-Sided Adhesive Foam (23x12mm)
Brand: Core Electronics
Stick sensors and parts of your project down!
$0.55 AUD, inc GST
MG Chemicals Rubber Renue, 125mL
MG Chemicals Rubber Renue rejuvenates and conditions rubber. Apply with a cloth, brush, or swab to bring belts, platens, rollers, and rubber parts back to life.
$26.85 AUD, inc GST
Professional Desktop PCB Holder
Brand: Core Electronics
This fancy and ultra-adjustable PCB holder was recommended to Adafruit by Collin, who is not only a master at soldering but also has impeccable taste in furnishings, so...
$31.25 AUD, inc GST
KKSB Silent Pi 5 Heatsink Case
Brand: KKSB
Discover the KKSB Silent Pi 5 Heatsink Case, featuring premium aluminium passive cooling, wireless-optimized design, and industrial mounting options for your Raspberry Pi 5 single-board computer.
$51.40 AUD, inc GST
Clear Acrylic Case for Raspberry Pi 5
Brand: Waveshare
Clear Acrylic Case for Raspberry Pi 5, Supports installing Official Active Cooler...
$9.70 AUD, inc GST
KKSB Raspberry Pi 5 Aluminum Thermal Case - Black
Brand: KKSB
Explore KKSB's premium aluminum case for Raspberry Pi 5, featuring integrated heatsink design, hexagonal ventilation, and precision-cut ports for optimal cooling and protection of your single-board computer.
$31.95 AUD, inc GST
52Pi Game5 Pi Case Enclosure for Raspberry Pi 5
The Game 5Pi Case from 52Pi is a retro gaming enclosure designed for Raspberry Pi 5, offering a retro aesthetic along with epic cooling capabilities!
$39.10 AUD, inc GST
Universal Multifunction Camera Screw Desk Clamp
Brand: The Pi Hut
If you need a solid, robust and secure way to mount camera 'things' on to a desk, pole or another surface - check out our chunky universal camera screw...
$25.65 AUD, inc GST
Metal Rework Station Stand with Two Clips and Four PCB Holders
Brand: Adafruit
This mini rework station is great for electronic work and repair. These were initially marketed for people doing cell phone repair and rework, and...
$139.95 AUD, inc GST
CircuitWorks Rubber Keypad Repair Kit
CircuitWorks® Rubber Keypad Repair Kit permanently repairs rubber keypads by restoring conductivity to worn, intermittent, and nonconductive carbon contacts. This product easily returns rubber keypads to like-new condition.
$78.45 AUD, inc GST
Plastic mounting plate for breadboard and Arduino - rubber feet!
Brand: Adafruit
By popular demand! Adafruit now have the plates from the ARDX available separately. Acrylic plate is engraved and cut here at the Adafruit factory. There are mounting...
$14.05 AUD, inc GST
Cooling Case for Jetson Nano B01
Brand: DFRobot
This cooling case, with a reset switch and a blue backlit power button, is an efficient thermal solution customized for Jetson Nano. It includes two fans, one is pre-installed inside the case, the other is a PWM controllable fan for cooling CPU.
$62.25 AUD, inc GST
Similar matches
Six Arm Soldering Station
Brand: DFRobot
This is a third hand soldering station with six flexible helping arms and an aluminum alloy base, allowing you to finish all kinds of complicated welding work. Aluminum-made...
$58.09 AUD, inc GST
Biometric Sensor Pad (10 pack)
Brand: Sparkfun
This is a 10 pack of Biomedical Sensor Pads, disposable electrodes that can be used to measure EEG, ECG and EMG levels. these little pads are perfect for short-term monitoring of Neurofeedback and Biofeedback purposes. They are to be used once and are very handy because of integrated, latex-free gel. Each pad adheres very well to the skin and the snap connector can be pushed on or removed from the electrode lead with no issue.
$16.70 AUD, inc GST
Conductive Rubber Sheet / Stretch Sensor- 200mm x 200mm x 0.5mm
Brand: Adafruit
This rubber sheet is made of the same carbon-black impregnated rubber material that our conductive rubber cord uses. Traditionally it would be used for...
$12.85 AUD, inc GST
Heating Pad - 5x10cm
Brand: Sparkfun
These DC powered heating pads are perfect for near-body heating applications. They get warm to the touch but not too hot. Simply apply 5VDC to the wire leads and within minutes, the pad will begin to warm up.
$8.50 AUD, inc GST
Electric Heating Pad - 10cm x 5cm
Brand: Adafruit
This is hot! Literally! Apply 5-12VDC and the stainless steel fibers in this heating fabric will warm up, creating a little heating pad. On one hand, it's just a...
$11.90 AUD, inc GST
Black Rubber Joystick Nubbin Cap for Navigation Joystick
Brand: Adafruit
A new tiny squishy delight! This Black Rubber Joystick Nubbin Cap is the perfect add-on to any of your projects with a 5-way navigation joystick, like the Adafruit Mini Color TFT with Joystick FeatherWing or Adafruit 128x64 OLED Bonnet for Raspberry Pi. Fits perfectly on classic 5-way navigation joysticks.
$0.99 AUD, inc GST
Conductive Rubber Sheet / Stretch Sensor- 200mm x 200mm x 1mm
Brand: Adafruit
This rubber sheet is made of the same carbon-black impregnated rubber material that our conductive rubber cord uses. Traditionally it would be used for...
$18.25 AUD, inc GST
Sealed Membrane 4*4 button pad with sticker
Brand: DFRobot
The 4x4 Keypad is a general purpose 16 button (4x4) matrix keypad. It comes ready to work, simply peel-off the adhesive backing, stick it to your surface and plug it in.
$3.07 AUD, inc GST
Makers love reviews as much as you do, please follow this link to review the products you have purchased.