Search results for: 'rp sma adapter'

25 results

Female SMA to Male RP-SMA RF Adapter

Brand: Adafruit

This RF adapter bit is great for anyone doing RF work. Depending on the dev-board and antenna you have, you may be faced with either RP-SMA or SMA connectors. 

$5.75 AUD, inc GST

Female RP-SMA to Male SMA RF Adapter

Brand: Adafruit
This RF adapter bit is great for anyone doing RF work. Depending on the dev-board and antenna you have, you may be faced with either RP-SMA or SMA connectors. Unfortunately...
$5.40 AUD, inc GST

SMA Male to RP-SMA Male Adapter

Brand: Sparkfun
This is an inner thread (outer nut) adapter that will connect to any of our wireless boards or interface cables and allow you to use an antenna/cable that has an outer thread configuration.
$4.35 AUD, inc GST

RP-SMA Male to SMA Female Adapter

Brand: Sparkfun
This is an adapter that converts an RP-SMA board to an SMA antenna. The adapter will connect to any of our 2.4GHz wireless boards (Bluetooth, Nordic, or XBee) or interface cables and will allow you to use an antenna/cable with an SMA connection.
$4.05 AUD, inc GST

SMA to uFL/u.FL/IPX/IPEX RF Adapter Cable

Brand: Adafruit
This RF adapter cable is super handy for anyone doing RF work. Often times, small electronics save space by having a pick-and-placeable u.FL connector (also called...
$7.80 AUD, inc GST

RP-SMA to w.FL / MHF3 / IPEX3 Adapter

Brand: Adafruit
Most antennas have SMA or RP-SMA connectors on them, how are you going to connect them to your little RF module? This little cable will bridge the...
$5.95 AUD, inc GST

Edge-Launch SMA Connector for 0.8mm / 0.031 Slim PCBs

Brand: Adafruit
This is a great connector for anyone doing RF work, when an SMA connector is required. It hugs the edge of a "half thickness" 0.031" thick PCB (or thinner!) and...
$4.50 AUD, inc GST

Directional Patch 2.4Ghz SMA Articulated Antenna (Seeed Studio)

Brand: Seeed Studio
The 2.4Ghz directional antenna is a high gain, excellent choice to use RF Explorer analyzer to scan in a specific direction. As opposed to omnidirectional...
$25.85 AUD, inc GST

Edge-Launch SMA Connector for 1.6mm / 0.062 Thick PCBs

Brand: Adafruit
This is a great connector for anyone doing RF work, when an SMA connector is required. It hugs the edge of a standard 0.063" thick PCB and 'launches' off of the...
$5.05 AUD, inc GST

RP-SMA to uFL/u.FL/IPX/IPEX RF Adapter Cable

Brand: Adafruit
This RF adapter cable is super handy for anyone doing RF work. Often times, small electronics save space by having a pick-and-placeable u.FL connector (also called...
$7.40 AUD, inc GST

iPEX to RP-SMA Connector (65mm)

Brand: RAKwireless

Securely link LoRa modules to external antennas with iPEX MHF-1 to RP-SMA/SMA RF coaxial cables for stable signal reception.

$8.50 AUD, inc GST

u.FL SMT Antenna Connector

Brand: Adafruit
u.FL connectors are very small surface-mount parts used when an external RF antena is desired but a big bulky SMA connector takes up too much space. Adafruit use this part...
$1.50 AUD, inc GST

SiK Telemetry Radio V3 - 915MHz, 100mW

Brand: Sparkfun
The 915MHz SiK Telemetry Radio V3 is a lightweight and inexpensive open source radio platform that can allow for ranges of 300m or more out of the box...
$289.95 AUD, inc GST

SMA adapter SMA Plug to SMA Jack right angle (Seeed Studio)

Brand: Seeed Studio
This RF connector is ideal to use RF Explorer deployed horizontally, with any antenna connected onto it. For instance when you are on the road and you...
$8.70 AUD, inc GST

SMA Adapter SMA Plug to SMA Jack straight - SMA Port Saver (Seeed Studio)

Brand: Seeed Studio
All RF connectors wear with use. The RF Explorer SMA ports are subject to minimal wear each time the connector interface is coupled and de-coupled with...
$16.25 AUD, inc GST

SMA-BNC adapter SMA Plug to BNC Jack straight (Seeed Studio)

Brand: Seeed Studio
Most HAM and two-way handheld radio antennas and devices are designed for BNC connectors. This BNC-female to SMA-male connector will easily interface your...
$8.60 AUD, inc GST

DIN Rail RJ-45 To Terminal Block Adapter - Right Angle

Brand: Adafruit
This one going out to all the makers and designers who use DIN railing in their builds. This adapter plate was recommended by a customer, its perfect for simplifying...
$29.25 AUD, inc GST

USB to Multi-Protocol Serial Adapter: RS-232 / TTL UART / RS-485

Brand: Adafruit
No matter what serial-esque protocol you need to interface with, this USB to Multi-Protocol Serial adapter will be able to get this-connected-to-that. It...
$39.95 AUD, inc GST

SMA Male to SMA Male Adapter

Brand: Sparkfun
This adapter has a standard polarity Male SMA connection at both ends. It allows you to convert a standard polarity Female SMA connection to Male. You c...
$7.10 AUD, inc GST

Adafruit PC Joystick to seesaw I2C Adapter - STEMMA QT / Qwiic

Brand: Adafruit
Back in my day, we used to have these big chunky PC joysticks that would plug into the back of your PC. No, not through USB, they had a DE-15 port and...
$11.65 AUD, inc GST

Bus Pirate 5 KF141 Quick Connect Adapter - Right Angle

Brand: Adafruit
This accessory makes wiring up sensors to your Bus Pirate 5 "a snap", with snap-open quick connects that plug into the BP5s header port....
$10.45 AUD, inc GST

Camera and Tripod 3/8 to 1/4 Adapter Screw

Brand: Adafruit
Whaddya got a screw loose or something? This 3/8" to 1/4" Adapter Screw is super handy if you're building projects that connect to a tripod or a camera. It's a simple...
$2.80 AUD, inc GST

FlexyPin Adapter - Raspberry Pi Pico

Brand: Pimoroni
These boards allow you to use various modules with a breadboard (and more) without having to solder the module in place. All you need are FlexyPins! It's...
$7.75 AUD, inc GST

Adafruit DS2482S-800 8 Channel I2C to 1-Wire Bus Adapter - STEMMA QT / Qwiic

Brand: Adafruit

This is a DS2482S-800 Stemma QT board that uses a I2C-to-1W controller chip, with 8 selectable channels, built-in parasitic-power-pullups,...

$34.20 AUD, inc GST

FlexyPin Adapter - RFM9x

Brand: Pimoroni
These boards allow you to use various modules with a breadboard (and more) without having to solder the module in place. All you need are FlexyPins! It's...
$3.40 AUD, inc GST
Feedback

Please continue if you would like to leave feedback for any of these topics:

  • Website features/issues
  • Content errors/improvements
  • Missing products/categories
  • Product assignments to categories
  • Search results relevance

For all other inquiries (orders status, stock levels, etc), please contact our support team for quick assistance.

Note: click continue and a draft email will be opened to edit. If you don't have an email client on your device, then send a message via the chat icon on the bottom left of our website.

Makers love reviews as much as you do, please follow this link to review the products you have purchased.