Search results for: 'pogo pin header'

40 results

Through Hole Inline Pogo Pin Header - 9 Pins with 0.1" Spacing

Brand: Adafruit
Pogo pins are little spring-loaded contacts, very handy for making jigs, or making momentary (but electrically solid) contacts. We use them by the dozen...
$3.50 AUD, inc GST

Through Hole Dual Inline Pogo Pin Header - 2x3 with 0.1" Spacing

Brand: Adafruit
Pogo pins are little spring-loaded contacts, very handy for making jigs, or making momentary (but electrically solid) contacts. We use them by the dozen...
$3.35 AUD, inc GST

Pogo Pin Probe Clip - 6 Pins with 2.54mm / 0.1" Pitch

Brand: Adafruit
The Pogo Pin Probe Clip with 6 pins in a 2.54 / 0.1" pitch spacing is a great way to test and connect with pin-point accuracy without soldering!...
$23.40 AUD, inc GST

Pogo Pin Probe Clip - 2x5 1.27mm Pitch SWD

Brand: Adafruit
The Pogo Pin Probe Clip with 2x5 0.05" pitch SWD spacing is a great way to test and connect with pin-point accuracy without soldering! It's sort...
$37.50 AUD, inc GST

Pimoroni Pogo-a-go-go Solderless GPIO Pogo Pins

Brand: Pimoroni
Fit a pHAT fiddle-free! These solderless pogo GPIO pins, nuts, bolts, and spacers make fitting a pHAT to your Pi Zero (or Zero W) super-quick and easy. Pogo-a-go-go!
$14.30 AUD, inc GST

Pogo Pins Spear Head (10 pack) - P75-LM3

Brand: Adafruit
Pogo pins are little spring-loaded contacts, very handy for making jigs, or making momentary (but electrically solid) contacts. Adafruit use them by the dozen for making...
$14.45 AUD, inc GST

SparkFun ISP Pogo Adapter v2

Brand: SparkFun
The ISP Pogo Adapter, a simple and easy way to adapt pogo pins to a 6-pin ISP header allowing you to program an IC still without soldering a header...
$27.50 AUD, inc GST

Pogo Pins Crown Head (10 pack) - P75-H2

Brand: Adafruit
Pogo pins are little spring-loaded contacts, very handy for making jigs, or making momentary (but electrically solid) contacts. Adafruit use them by the dozen for making...
$8.60 AUD, inc GST

Pogo Pin w/ Concave Tip

Brand: SparkFun
These 33mm (1.3") spring loaded pogo pins are great for programming and applications where you don’t always want headers soldered onto your boards. We use them for our programming jigs in production. The pins fit snugly into most standard perf board holes. Solder them just like you would normal wire.
$4.20 AUD, inc GST

Industrial 8-Channel Relay Module for Raspberry Pi Pico

Brand: Waveshare
Industrial 8-Channel Relay Module For Raspberry Pi Pico, Power Supply Isolation, Photocoupler Isolation...
$33.35 AUD, inc GST

Pogo Pin w/ Pointed Tip

Brand: SparkFun
These 33mm (1.3") spring loaded pogo pins are great for programming and applications where you don’t always want headers soldered onto your boards. We use them for our programming jigs in production. The pins fit snugly into most standard perf board holes. Solder them just like you would normal wire. This unit has a conical pointed tip.
$2.50 AUD, inc GST

Uninterruptible Power Supply UPS HAT For Raspberry Pi Zero

Brand: Waveshare

UPS module for Pi Zero delivers 5V output while charging batteries. I2C monitoring and auto battery switchover ensure continuous Pi Zero operation.

$39.65 AUD, inc GST

Pogo Pin w/ Round Tip

Brand: SparkFun
These 33mm (1.3") spring loaded pogo pins are great for programming and applications where you don’t always want headers soldered onto your boards. We use them for our programming jigs in production. The pins fit snugly into most standard perf board holes. Solder them just like you would normal wire.
$2.55 AUD, inc GST

DIY Magnetic Connector - Right Angle Three Contact Pins

Brand: Adafruit
If you love power adapters or toys & gadgets that have magnetic connections, you can now experiment with these futuristic connectors easily. It's...
$11.60 AUD, inc GST

Raspberry Pi Zero 2W To 3B Adapter

Brand: Waveshare
Use Pi Zero 2W To Reproduce The Original Appearance Of The 3B Series
$33.65 AUD, inc GST

5inch DSI Capacitive Touch Display (720×1280, IPS Panel)

Brand: Waveshare

Sharp 720 × 1280 IPS touch panel that bolts straight onto a Raspberry Pi and leaves every GPIO pin free.

$107.85 AUD, inc GST

RoboClaw 2x45A Motor Controller (V6B, pin header I/O)

Brand: Pololu
The RoboClaw motor controllers from Basicmicro can control a pair of brushed DC motors using USB serial, TTL serial, RC, or analog inputs. Integrated dual...
$319.95 AUD, inc GST

Male Pin Header 2.54mm (1x40)

Brand: Core Electronics
Perfect for prototyping, the straight male header is a super common header type so grab a few and put your ideas to the test!
$0.45 AUD, inc GST

Male Pin Header 2.54mm (2x20)

Brand: Core Electronics
Perfect for prototyping, the straight male header is a super common header type so grab a few and put your ideas to the test!
$1.50 AUD, inc GST

Male Pin Header 2.54mm (1x20)

Brand: Core Electronics
Perfect for prototyping, these straight male headers are a super common header type so grab a few and put your ideas to the test!
$0.35 AUD, inc GST

Maker Pi Pico Mini - Without Raspberry Pi Pico / Pico W (Pre-Soldered Pin Header)

Brand: Pimoroni
Simplifying Projects with Raspberry Pi Pico Small but Mighty Love the Maker Pi Pico but can't fit it into your project? Now we have the Maker Pi Pico...
$24.40 AUD, inc GST

40-Pin 2.54mm Round Male Pin Header

Brand: Core Electronics

Great for low-profile designs or prototyping with DIP IC's.

$1.40 AUD, inc GST

Breadboard-friendly Mini PIR Motion Sensor with 3 Pin Header

Brand: Adafruit
PIR sensors are used to detect motion from pets/humanoids from about 5 meters away (possibly works on zombies, not guaranteed). This sensor is much smaller than most PIR modules, which makes it great for unobtrusive projects. It's also fully-contained - only needs power and ground, and it's breadboard or perfboard friendly.
$7.50 AUD, inc GST

Male Pin Header 2.54mm (2x40)

Brand: Core Electronics

Need a customisable connector for random projects?

$0.85 AUD, inc GST

40-Pin 2.54mm Round Female Pin Header

Brand: Core Electronics

Great for low-profile designs or prototyping with DIP IC's.

$0.54 AUD, inc GST

2.54mm / 0.1" Pitch Press-Fit Male Pin Header

Brand: Adafruit
If your soldering isn't quite up to scratch, or you yet don't own a soldering iron, then these nifty 0.1"/2.54mm standard pitch press-fit...
$4.95 AUD, inc GST

DRV8434S SPI Stepper Motor Driver Carrier, 2A Max. Current Limit (Header Pins Soldered)

Brand: Pololu
This version of our DRV8434S SPI Stepper Motor Driver Carrier, 2A Max. Current Limit ships with male header pins installed, so no soldering is required to...
$24.70 AUD, inc GST

Motoron M2U550 Dual Serial Motor Controller (Header Pins Soldered)

Brand: Pololu
The Motoron M2U550 Dual I²C Motor Controller offers a compact solution for controlling two DC motors using a UART interface. Multiple Motoron controllers...
$28.30 AUD, inc GST

Motoron M2T256 Dual I²C Motor Controller (Header Pins Soldered)

Brand: Pololu
The Motoron M2T256 Dual I²C Motor Controller offers a compact solution for controlling two DC motors using an I²C interface. Multiple Motoron controllers...
$41.65 AUD, inc GST

Motoron M2U256 Dual Serial Motor Controller (Header Pins Soldered)

Brand: Pololu
The Motoron M2U256 Dual I²C Motor Controller offers a compact solution for controlling two DC motors using a UART serial interface. Multiple Motoron...
$41.65 AUD, inc GST

Motoron M1U256 Single Serial Motor Controller (Header Pins Soldered)

Brand: Pololu
The Motoron M1U256 Single I²C Motor Controller offers a compact solution for controlling one DC motor using a UART serial interface. Multiple Motoron...
$29.50 AUD, inc GST

Motoron M1U550 Single Serial Motor Controller (Header Pins Soldered)

Brand: Pololu
The Motoron M1U550 Single I²C Motor Controller offers a compact solution for controlling one DC motor using a UART serial interface. Multiple Motoron...
$22.15 AUD, inc GST

DRV8434A Stepper Motor Driver Carrier (Header Pins Soldered)

Brand: Pololu
This version of our DRV8434A Stepper Motor Driver Carrier ships with male header pins installed, so no soldering is required to use it with an appropriate...
$24.70 AUD, inc GST

10 Pcs 40 Pin Headers - Straight

Brand: DFRobot
This is 40 Pin 2.54 mm Single Row Pin Header Strip. It is great for our FIO and custom PCBs or general custom headers.
$4.59 AUD, inc GST

Set of header pins for PYBv1.1

Brand: Micropython
A set of female header pins for PYBv1.0, PYBv1.1, PYBLITEv1.0 and PYBLITEv1.0-AC.
$7.20 AUD, inc GST

Motoron M1T256 Single I²C Motor Controller (Header Pins Soldered)

Brand: Pololu
The Motoron M1T256 Single I²C Motor Controller offers a compact solution for controlling one DC motor using an I²C interface. Multiple Motoron controllers...
$29.15 AUD, inc GST

A5984 Stepper Motor Driver Carrier, Fixed 750mA@5V / [email protected] (Soldered Header Pins)

Brand: Pololu
This version is item #5348 with soldered header pins, so no soldering is required to use it with an appropriate 16-pin socket or solderless breadboard. It...
$10.40 AUD, inc GST

DRV8434S SPI Stepper Motor Driver Carrier, Potentiometer for Max. Current Limit (Header Pins Soldered)

Brand: Pololu
This version of our DRV8434S SPI Stepper Motor Driver Carrier, Potentiometer for Max. Current Limit ships with male header pins installed, so no soldering...
$24.70 AUD, inc GST

DRV8434 Stepper Motor Driver Carrier (Header Pins Soldered)

Brand: Pololu
This version of our DRV8434 Stepper Motor Driver Carrier ships with male header pins installed, so no soldering is required to use it with an appropriate...
$20.05 AUD, inc GST

MP6500 Stepper Motor Driver Carrier, Digital Current Control (Header Pins Soldered)

Brand: Pololu
This version of our MP6500 Stepper Motor Driver Carrier with Digital Current Control ships with male header pins installed, so no soldering is required to...
$18.40 AUD, inc GST
Feedback

Please continue if you would like to leave feedback for any of these topics:

  • Website features/issues
  • Content errors/improvements
  • Missing products/categories
  • Product assignments to categories
  • Search results relevance

For all other inquiries (orders status, stock levels, etc), please contact our support team for quick assistance.

Note: click continue and a draft email will be opened to edit. If you don't have an email client on your device, then send a message via the chat icon on the bottom left of our website.

Makers love reviews as much as you do, please follow this link to review the products you have purchased.