Search results for: 'piicodev 4-pin cable'
Learn
PiicoDev Cable 100mm
Brand: PiicoDev
This 100mm cable is for connecting PiicoDev modules together - it is a 4-wire harness with 1mm pitch SH connectors on each end.
$0.85 AUD, inc GST
PiicoDev Cable 200mm
Brand: PiicoDev
This 200mm cable is for connecting PiicoDev modules together - it is a 4-wire harness with 1mm pitch SH connectors on each end.
$0.98 AUD, inc GST
PiicoDev Cable 50mm
Brand: PiicoDev
This 50mm cable is for connecting PiicoDev modules together - it is a 4-wire harness with 1mm pitch SH connectors on each end.
$0.80 AUD, inc GST
PiicoDev Prototyping Cable (Male) 200mm
Brand: PiicoDev
This 200mm cable breaks out the four wires in a PiicoDev cable for manual wiring to breadboards or development boards. It's a 4-wire harness with an SH connector on one end and four Dupont-style connectors on the other.
$0.95 AUD, inc GST
PiicoDev Cable 500mm
Brand: PiicoDev
This 500mm cable is for connecting PiicoDev modules together - it is a 4-wire harness with 1mm pitch SH connectors on each end.
$1.35 AUD, inc GST
PiicoDev Cable Expansion Kit
Brand: PiicoDev
Top up your PiicoDev Starter kit with a range of the most used cables!
$12.76 AUD, inc GST
PiicoDev Prototyping Cable (Female) 200mm
Brand: PiicoDev
This 200mm cable breaks out the four wires in a PiicoDev cable for manual wiring to breadboards or development boards. It's a 4-wire harness with an SH connector on one end and four Dupont-style connectors on the other.
$2.70 AUD, inc GST
PiicoDev Adapter for Breadboards
Brand: PiicoDev
The PiicoDev® Adapter for Breadboards allows you to break-out the 4-wires in a PiicoDev cable for prototyping on a breadboard.
$1.65 AUD, inc GST
PiicoDev Adapter for Raspberry Pi
Brand: PiicoDev
The PiicoDev® Adapter for Raspberry Pi is a great way to connect sensors to your Raspberry Pi without soldering.
$4.05 AUD, inc GST
PiicoDev Splitter
Brand: PiicoDev
Split one PiicoDev Cable in three directions, or break out for soldered connections
$3.50 AUD, inc GST
STEMMA QT / Qwiic JST SH 4-Pin Cable - 200mm Long
Brand: Adafruit
This 4-wire cable is a little over 200mm / 7.8" long and fitted with JST-SH female 4-pin connectors on both ends. Compared with the chunkier JST-PH these are 1mm...
$2.55 AUD, inc GST
PiicoDev Expansion Board for Pico (Non-Recharging)
Brand: PiicoDev
Start experimenting with high-tech sensors and modules with Raspberry Pi Pico/RP2040. Use the on-board PiicoDev connector to quickly and easily connect with the PiicoDev family of sensor modules without soldering.
$5.90 AUD, inc GST
PiicoDev Adapter for Micro:bit
Brand: PiicoDev
Connect your Micro:bit with the outside world using PiicoDev® Adapter for Micro:bit. With this adapter you can experiment with sensors from the PiicoDev range giving your Micro:bit new sensing abilities.
$13.20 AUD, inc GST
PiicoDev Servo Driver (4 Channel)
Brand: PiicoDev
Motion means exciting. Control up to 4 servos independently!
$14.65 AUD, inc GST
STEMMA QT / Qwiic JST SH 4-Pin Cable - 400mm long
Brand: Adafruit
This 4-wire cable is a little over 400mm / 15.7" long and fitted with JST-SH female 4-pin connectors on both ends. Compared with the chunkier JST-PH...
$3.25 AUD, inc GST
Gravity 4Pin IIC/I2C/UART Sensor Cable (10pcs)
Brand: DFRobot
The Gravity 4Pin IIC/I2C/UART sensor cable is a standard Gravity series 4-Pin cable with 30cm length. One side is PH2.0-4p connector and the other side is XH2.54...
$10.20 AUD, inc GST
JST PH 4-Pin Socket to Color Coded Cable - 200mm
Brand: Adafruit
This cable will let you turn a JST PH 4-pin cable socket into 4 individual tinned wires. These are great to match up with Adafruit's JST 4-PH cables, for extending and...
$2.10 AUD, inc GST
JST-SH 4-Pin SMD Connector (Side Entry) - PiicoDev Compatible Connector
Add a small 4-pin connector to your SMD PCB designs with this JST-SH 4-pin compatible connector...
$0.23 AUD, inc GST
GlowBit Pico Orb Base
Brand: GlowBit
Round and glowing! 43 GlowBit LEDs, A Pico mount and all of its IO broken out (along with a PiicoDev connector).
$16.33 AUD, inc GST
Similar matches
STEMMA QT / Qwiic JST SH 4-Pin Cable - 50mm Long
Brand: Adafruit
This 4-wire cable is 50mm / 1.9" long and fitted with JST SH female 4-pin connectors on both ends. Compared with the chunkier JST PH these are 1mm pitch instead...
$1.85 AUD, inc GST
JST SH 4-Pin Cable - Qwiic Compatible - 100mm Long
Brand: Adafruit
This 4-wire cable is a little over 100mm / 4" long and fitted with JST-SH female 4-pin connectors on both ends. Compared with the chunkier JST-PH these are 1mm pitch...
$1.90 AUD, inc GST
4-pin JST PH to JST SH Cable - STEMMA to QT / Qwiic - 200mm long
Brand: Adafruit
Are you a maker in the midst of a STEMMA dilemma? This 200mm long 4-wire cable is a fantastic chimera-cable fitted with STEMMA QT / Sparkfun Qwiic JST SH on one...
$1.95 AUD, inc GST
1.25mm Pitch 4-pin Cable 20cm long 1:1 Symmetric Cable - Molex PicoBlade Compatible
Brand: Adafruit
When 0.1" is too big, and JST PH's too chunky, this ultra-slim 1.25mm connector cable is a reliable alternative. These are 1.25mm pitch but have a nice clicky connection.
$1.85 AUD, inc GST
1.25mm Pitch 4-pin Cable Matching Pair - 40cm long - Molex PicoBlade Compatible
Brand: Adafruit
When 0.1" is too big, and JST PH's too chunky, these ultra-slim 1.25mm connectors are a reliable alternative. These are only 1.25mm pitch, but have a nice clicky connection.
$1.95 AUD, inc GST
JST PH-Style Cable with Female Pins for 0.1" Housings, 4-Pin, 12cm
Brand: Pololu
This 4-conductor, 12 cm (4.5") cable has 24 AWG wires and a 4-pin female JST PH-type connector (2mm pitch) on one end. The other ends of the wires are...
$3.75 AUD, inc GST
Panel Mount USB to 4-pin Female Header Cable - 6'
Brand: Sparkfun
You might have seen these cables used in computers. They are typically used to bring USB connections from a motherboard to the external case, or the rear expansion slots. They have a 0.1" spaced 4-pin header on one end and a USB A connector on the other.
$6.50 AUD, inc GST
5-pin (Arduino MKR) to 4-pin JST SH STEMMA QT / Qwiic Cable - 100mm long
Brand: Adafruit
Are you a maker in the midst of a STEMMA dilemma? This 100mm long cable is a fantastic chimera-cable fitted with STEMMA QT 4-pin JST SH on one end, and Arduino MKR...
$2.85 AUD, inc GST
IDE Molex 4 Pin Socket Cable - 30cm long
Brand: Adafruit
For big projects with big power needs, an AT or ATX power supply is a handy place to grab 5V or 12VDC. The only problem is that these supplies have...
$2.70 AUD, inc GST
IDE Molex 4-pin Plug Cable - 30cm long
Brand: Adafruit
If you're messing around with floppy drives, or disk drives, or other devices that are usually powered with a PC motherboard you'll often see...
$2.75 AUD, inc GST
Raspberry Pi Pico Debug Cable
Brand: Sparkfun
This 3 Pin JST-SH Cable is a 30cm cable for solderless Serial Wire Debug (SWD) connections for Raspberry Pi Pico, Pico H, and Pico WH boards. It features...
$6.30 AUD, inc GST
TinyFX 2-Pin Connection Cables (5cm, 6-Pack)
Brand: Pimoroni
Connect your TinyFX expansion boards and mono LED strips with these reliable 2-pin JST-SUR cables, available in 5cm and 15cm lengths for flexible installation options.
$8.35 AUD, inc GST
Makers love reviews as much as you do, please follow this link to review the products you have purchased.