Search results for: 'jst-sm'

This 600mm length 4-Pos JST cable has female connectors at both ends for conveying data between electronics in your project. It is the same.....

This kit includes PHR-2，PHR-3 and PHR-4 housing (20 units each)， through-hole type shrouded header （20 units each）and crimp contact (100 units).

Red and black tinned wires with a 2-pin JST PH connector on the end. 4" / 100mm long. Matches up nicely with Adafruit's Lipoly charger! Adafruit don't have the 'mating' version...

For a really long time Adafruit assumed that the JST PH didn't have a free-hanging male header version. But then Adafruit found this JST-PH 2-pin Male Cable, and Adafruit were like...

Totally 220 pieces, this JST-PH Connector Kit is a must-have for your workstation. You'll have enough sockets and plugs to fuel your maker tendencies for days on...

Are you a maker in the midst of a STEMMA dilemma? This 200mm long 4-wire cable is a fantastic chimera-cable fitted with STEMMA QT / Sparkfun Qwiic JST SH on one...

This is a 2-pin, through-hole PH series JST connector. The pins are spaced by 2mm.

This cable will let you turn a JST PH 4-pin cable port into 3 individual wires with high-quality 0.1" male header plugs on the end. Adafruit are carrying these to match...

If you're fancying to connect to the debug port on a Pico WH, or the two ports on a Pico Debug Probe or anything else with a JST SH compatible 3-pin...

This is a simple two wire cable. Great for jumping from board to board or just about anything else. There is a 2-pin JST connector on one end, bare cable on the opposite end. It also comes with the mating connector for the JST.

Totaling 560 pieces, this JST-XH Connector Kit is a must-have for your workstation. You'll have enough sockets and headers to fuel your maker tendencies for days...

This simple board serves as an adapter between a JST SH-style 6-pin male connector and breadboard-compatible 0.1"-pitch through holes. It works with our ...

This simple board serves as an adapter between a JST SH-style 6-pin male connector and breadboard-compatible 0.1"-pitch through holes. It works with our ...

This 600mm Length JST adaptor is able to plug into the encoder found on 5000 Series Motors and 52xx Series Gear Motors, using the JST XH.....

This 12 cm (4.5") cable has six 28 AWG wires and a 6-pin female JST SH-type connector that works with our Micro Metal Gearmotor Encoders with top-entry...

This is a simple four wire cable. Great for jumping from board to board or just about anything else. These cables mate with the connectors listed below. They have bare wires on one end and a 4-pin JST SH connector on the other end with a mating socket.

This is a simple jumper adapter cable that comes pre-terminated with a female JST connector on one end and a breadboard hookup pigtail on the other. This cable makes it easy to connect components with a JST connector to a breadboard or an Arduino-based device’s pins.

This 10 cm (4") cable has six 28 AWG wires and 6-pin female JST SH-type connectors on both ends. These connectors work with our Micro Metal Gearmotor ...

This is a 2-pin JST RCY connector typically used for low-voltage applications running 10A or less. They are commonly found in RC vehicles. These come in a bag of 1 male plug, 1 female plug, plus pins to connect them both. The pins crimp to your cable and are inserted into the housing.

This simple board serves as an adapter between a JST SH-style 6-pin male connector and breadboard-compatible 0.1"-pitch through holes. It works with our ...

These simple boards serve as adapters between a JST SH-style 4-pin male connector and breadboard-compatible 0.1"-pitch through holes. They work with our...

This simple board serves as an adapter between a JST PH-style 6-pin, top-entry connector and breadboard-compatible 0.1"-pitch through holes. The PH...

Designing boards with plug-n-play connectivity is a snap, with STEMMA connectors. Here's a pack of 10 of Adafruit's favorite 2mm pitch connector - the JST PH 4 pin. These...

This 30 cm (12") cable has six 28 AWG wires and a 6-pin female JST SH-type connector that works with our Micro Metal Gearmotor Encoders with top-entry...

These simple boards serve as adapters between a JST SH-style 4-pin male connector and breadboard-compatible 0.1"-pitch through holes.

This 40 cm (16") cable has six 28 AWG wires and 6-pin female JST SH-type connectors on both ends. These connectors work with our Micro Metal Gearmotor ...

This JST RCY plug is also referred to as a BEC (battery eliminator circuit) connector and is commonly used with battery packs for RC applications. The connector is keyed so that power cannot be reversed. You can use a crimping tool to attach these connectors to your own 22- to 28-AWG wires. This pack contains enough housings and crimp pins (including two spare pins) for 3 male connectors.

This 16 cm (6.3") cable has six 28 AWG wires and 6-pin female JST SH-type connectors on both ends. These connectors work with our Micro Metal Gearmotor ...