Search results for: 'jst mx crimp kit'

Red and black tinned wires with a 2-pin JST PH connector on the end. 4" / 100mm long. Matches up nicely with Adafruit's Lipoly charger! Adafruit don't have the 'mating' version...

This kit includes JST XHP-2, XHP-3 and XHP-4 housing (20 units each), through-hole type shrouded header (20 units each) and crimp contact (100 units).

Totally 220 pieces, this JST-PH Connector Kit is a must-have for your workstation. You'll have enough sockets and plugs to fuel your maker tendencies for days on...

This kit includes PHR-2，PHR-3 and PHR-4 housing (20 units each)， through-hole type shrouded header （20 units each）and crimp contact (100 units).

Totaling 560 pieces, this JST-XH Connector Kit is a must-have for your workstation. You'll have enough sockets and headers to fuel your maker tendencies for days...

This crimping tool can be used to crimp both male and female versions of Pololu's Tamiya connector crimp pins, mini Tamiya connector crimp pins, JST connector crimp pins, JR crimp pins, Futaba J crimp pins, and crimp pins for 0.1″ housings onto 16-28 AWG wires to make custom cables. The crimping die has a width of 7 mm, and the tool offers ratcheting action for increased consistency and ease of use.

These 2-wire cables are 16cm long and come as a set. One side has a 2-pin JST SM type connector plug on the end. The other side has a matching 2-pin JST SM type...

These solid 2.5mm pitch connector cable pairs are great when you need something that can carry a couple amps of current, easy to connect and disconnect, and is just-about 0.1" pitch compatible.

These 3-wire cables are 163mm (6.4") long and come as a set. One cable has a JST SM type connector plug on the end. The other cable has a matching JST SM type receptacle...

This JST RCY plug is also referred to as a BEC (battery eliminator circuit) connector and is commonly used with battery packs for RC applications. The connector is keyed so that power cannot be reversed. You can use a crimping tool to attach these connectors to your own 22- to 28-AWG wires. This pack contains enough housings and crimp pins (including two spare pins) for 3 male connectors.

This simple board serves as an adapter between a JST SH-style 6-pin male connector and breadboard-compatible 0.1"-pitch through holes. It works with our ...

This cable will let you turn a JST PH 3-pin cable socket into 3 individual tinned wires. These are great to match up with Adafruit's JST 3-PH cables, for extending and...

This is a 4-pin JST-ZHR cable that's terminated on the end with breadboard compatible Dupont connectors. The four male pins that terminate one side of the cable...

This product includes 2-pin 2.0mm mating connector housing(10 units) and crimp pins (20 units).

These simple boards serve as adapters between a JST SH-style 5-pin male connector and breadboard-compatible 0.1"-pitch through holes. They work with our...

These simple boards serve as adapters between a JST SH-style 4-pin male connector and breadboard-compatible 0.1"-pitch through holes.

This 2-conductor, 25 cm (10") cable has 28 AWG wires and 2-pin female JST SH-type connectors on both ends...

This simple board serves as an adapter between a JST PH-style 4-pin, top-entry connector and breadboard-compatible 0.1"-pitch through holes. The PH...

This JST RCY plug is also referred to as a BEC (battery eliminator circuit) connector and is commonly used with battery packs for RC applications. The connector is keyed so that power cannot be reversed. You can use a crimping tool to attach these connectors to your own 22- to 28-AWG wires. This pack contains enough housings and crimp pins (including two spare pins) for 3 female connectors.

This is a 2-pin JST RCY connector typically used for low-voltage applications running 10A or less. They are commonly found in RC vehicles. These come in a bag of 1 male plug, 1 female plug, plus pins to connect them both. The pins crimp to your cable and are inserted into the housing.

This is a 6-pin JST-ZHR cable that's terminated on the end with breadboard compatible Dupont connectors. The six male pins that terminate one side of the cable feature...

This simple board serves as an adapter between a JST PH-style 6-pin, top-entry connector and breadboard-compatible 0.1"-pitch through holes. The PH...

Here is a six pin vertical 1.0mm pitch connector. It is useful if you need something very tiny as a connection. These are not the standard JST type connectors we use on most of our boards, but are actually the much smaller JST-SH type.

This simple board serves as an adapter between a JST PH-style 3-pin, side-entry connector and breadboard-compatible 0.1"-pitch through holes. The PH...

This is a simple four wire cable. Great for jumping from board to board or just about anything else. These cables mate with the connectors listed below. They have bare wires on one end and a 4-pin JST SH connector on the other end with a mating socket.

These 4-wire cables are 15cm long and come as a set, one side has a JST SM type connector plug on the end. The other side has a matching JST SM type receptacle connector...

These 5-wire cables are 168mm (6.6") long and come as a set. One cable has a JST SM type connector plug on the end. The other cable has a matching JST SM type receptacle...

This is a simple six wire cable. Great for jumping from board to board or just about anything else. These cables mate with the connectors listed below. They have bare wires on one end and a 6-pin JST SH connector on the other end with a mating socket.

This simple board serves as an adapter between a JST PH-style 2-pin, top-entry connector and breadboard-compatible 0.1"-pitch through holes. The PH...

This pack contains everything you need to add up to three male JR connectors — the connectors that mate with those commonly found on generic RC servos — to custom cables. You can use a crimping tool to attach the included pins to your own 22–26 AWG wires. This pack contains enough housings and crimp pins (including 3 spare pins) for 3 male connectors. The crimp pins have gold-flashed male contacts.

Add connectors to your micro metal gearmotors with these boards that feature side-entry, 2-pin male JST SH-type connectors. These boards are compatible...

These shrouded, 2-pin JST XH-style male connectors have straight leads and match the female connector on the 2-pin female XH-style cable, and they also work with other many other 0.1″-pitch female connectors, such as Pololu's female premium jumper wires. They are sold in packs of four units.

Designing boards with plug-n-play connectivity is a snap, with STEMMA connectors. Here's a pack of 10 of Adafruit's favorite 2mm pitch connector - the JST PH 4 pin. These...

If you're a DIY enthusiast who likes to micro-manage your project's connections, here is a 10-pack of some micro JST SH connectors! They're solid plastic with 4...

If you're a DIY enthusiast who likes to micro-manage your project's connections, here is a 10-pack of some micro JST SH connectors! They're solid plastic with 4...

This product includes 4-pin 2.0mm mating connector housing(10 units) and crimp pins (40 units).

Add connectors to your micro metal gearmotors with these boards that feature side-entry, 2-pin male JST SH-type connectors. These boards are compatible...