Search results for: 'force sensitive resistors'
Learn
Force Sensitive Resistor (7mm, 5KG)
Brand: Core Electronics
Use the force...sensitive resistor! Add an easy-to-implement haptic analog sensor to your projects.
$8.20 AUD, inc GST
Round Force-Sensitive Resistor (FSR) - Interlink 402
Brand: Adafruit
FSRs are sensors that allow you to detect physical pressure, squeezing and weight. They are simple to use and low cost. This sensor is a Interlink model 402 FSR...
$7.30 AUD, inc GST
Force Sensitive Resistor 0.5"
Brand: Sparkfun
This is a force sensitive resistor with a round, 0.5" diameter, sensing area. This FSR will vary its resistance depending on how much pressure is being applied to the sensing area. The harder the force, the lower the resistance. When no pressure is being applied to the FSR its resistance will be larger than 1MΩ. This FSR can sense applied force anywhere in the range of 100g-10kg.
$18.20 AUD, inc GST
Force Sensitive Resistor - Square
Brand: Sparkfun
This is a force sensitive resistor with a square, 1.75x1.5", sensing area. This FSR will vary its resistance depending on how much pressure is being applied to the sensing area. The harder the force, the lower the resistance. When no pressure is being applied to the FSR its resistance will be larger than 1MΩ. This FSR can sense applied force anywhere in the range of 100g-10kg.
$32.45 AUD, inc GST
RP-C7.6-LT Thin Film Pressure Sensor
Brand: DFRobot
This is a circular flexible thin film pressure sensor of long legs with a diameter of 7.6mm, which can be used to realize highly sensitive detection of pressure...
$6.50 AUD, inc GST
RP-L-170 Thin Film Pressure Sensor
Brand: DFRobot
This is a long flexible thin film pressure sensor with a length of 170mm, which can be used to realize highly sensitive detection of pressure. The sensor is durable...
$10.70 AUD, inc GST
RP-C18.3-ST Thin Film Pressure Sensor
Brand: DFRobot
This is a circular flexible thin film pressure sensor of short legs with a diameter of 18.3mm, which can be used to realize highly sensitive detection of pressure...
$8.40 AUD, inc GST
RP-S40-ST Thin Film Pressure Sensor 40mmx40mm
Brand: DFRobot
This is a square flexible thin film pressure sensor of short legs with a side length of 40mm, which can be used to realize highly sensitive detection of pressure...
$12.70 AUD, inc GST
Flexiforce Pressure Sensor - 100lbs.
Brand: Sparkfun
This is a piezoresistive force sensor from Tekscan. The harder you press, the lower the sensor’s resistance. Pressing hard, the resistance changes from infinite to ~300k. The sensor itself is thin and flexible, but the resistance does not change while being flexed. Resistance changes only when pressure is applied to the round area at the end of the sensor. Used as a presence sensor (someone standing), weight sensor, pressure sensor (impact testing), etc.
$44.65 AUD, inc GST
Gravity: Thin-film Pressure Sensor for Pressure Science Course
Brand: DFRobot
The Gravity: Thin-film Pressure Sensor is ideal for science and engineering courses, it measures pressure from 20g to 6kg. Seamlessly integrates with...
$8.75 AUD, inc GST
RP-L-400 Thin Film Pressure Sensor
Brand: DFRobot
This is a long flexible thin film pressure sensor with a length of 400mm, which can be used to realize highly sensitive detection of pressure. The sensor is durable...
$17.50 AUD, inc GST
RP-C7.6-ST Thin Film Pressure Sensor
Brand: DFRobot
This is a circular flexible thin film pressure sensor of short legs with a diameter of 7.6mm, which can be used to realize highly sensitive detection of pressure...
$4.75 AUD, inc GST
Force Sensitive Resistor - Small
Brand: Sparkfun
This is a small force sensitive resistor. It has a 0.16" (4 mm) diameter active sensing area. This FSR from Interlink Electronics will vary its resistance depending on how much pressure is being applied to the sensing area. The harder the force, the lower the resistance. When no pressure is being applied to the FSR, its resistance will be larger than 1MΩ, with full pressure applied the resistance will be 2.5kΩ.
$20.30 AUD, inc GST
Force Sensitive Resistor - Long
Brand: Sparkfun
This very long force sensitive resistor - over 2 feet - has a sensing area of 0.25x24". This FSR from Interlink Electronics will vary its resistance depending on how much pressure is being applied to the sensing area. The harder the force, the lower the resistance. When no pressure is being applied to the FSR its resistance will be larger than 1MΩ. This FSR can sense applied force anywhere in the range of 100g-10kg.
$59.05 AUD, inc GST
Extra-long force-sensitive resistor (FSR) - Interlink 408
Brand: Adafruit
FSRs are sensors that allow you to detect physical pressure, squeezing and weight. They are simple to use and low cost. This sensor is a Interlink model 408 FSR...
$41.10 AUD, inc GST
Force-Sensing Resistor: 1.5″ Square
Brand: Pololu
This force-sensing resistor (FSR) from Interlink Electronics is a passive component that exhibits a decrease in resistance when there is an increase in the force applied to the 1.5″ × 1.5″ (4 cm × 4 cm) active area, allowing you to create a sensor that is able to detect force or pressure. With a force sensitivity range of a few grams to a few kilograms, this sensor is optimized for use in human touch control applications.
$38.70 AUD, inc GST
Force-Sensing Resistor: 0.6″-Diameter Circle
Brand: Pololu
This force-sensing resistor (FSR) from Interlink Electronics is a passive component that exhibits a decrease in resistance when there is an increase in the force applied to the 0.58″-diameter (1.5 cm) active area, allowing you to create a sensor that is able to detect force or pressure. With a force sensitivity range of a few grams to a few kilograms, this sensor is optimized for use in human touch control applications.
$30.05 AUD, inc GST
Force-Sensing Resistor: 0.2″-Diameter Circle
Brand: Pololu
This force-sensing resistor (FSR) from Interlink Electronics is a passive component that exhibits a decrease in resistance when there is an increase in the force applied to the 0.2″-diameter (0.5 cm) active area, allowing you to create a sensor that is able to detect force or pressure. With a force sensitivity range of a few grams to a few kilograms, this sensor is optimized for use in human touch control applications.
$29.30 AUD, inc GST
Force-Sensing Resistor: 0.6″-Diameter Circle, Short Tail
Brand: Pololu
This force-sensing resistor (FSR) from Interlink Electronics is a passive component that exhibits a decrease in resistance when there is an increase in the force applied to the 0.58″-diameter (1.5 cm) active area, allowing you to create a sensor that is able to detect force or pressure. With a force sensitivity range of a few grams to a few kilograms, this sensor is optimized for use in human touch control applications.
$29.30 AUD, inc GST
Force-Sensing Resistor: 0.25″-Diameter Circle, Short Tail
Brand: Pololu
This force-sensing resistor (FSR) from Interlink Electronics is a passive component that exhibits a decrease in resistance when there is an increase in the force applied to the 0.25″-diameter (0.5 cm) active area, allowing you to create a sensor that is able to detect force or pressure. With a force sensitivity range of a few grams to a few kilograms, this sensor is optimized for use in human touch control applications.
$29.30 AUD, inc GST
RP-C18.3-LT Thin Film Pressure Sensor
Brand: DFRobot
This is a circular flexible thin film pressure sensor of long legs with a diameter of 18.3mm, which can be used to realize highly sensitive detection of pressure...
$11.55 AUD, inc GST
Pressure-Sensitive Conductive Sheet (Velostat/Linqstat)
Brand: Adafruit
This conductive material (also known as "Velostat" or "Linqstat") is a nice addition for your wearable/sensor hacking toolkit. It's pressure-sensitive: squeezing...
$10.45 AUD, inc GST
Circular Soft Potentiometer (Ribbon Sensor)
Brand: Adafruit
Manufactured by Spectra Symbol, these are nice little ribbon controllers (also known as 'soft potentiometers') with an adhesive backing. This shape is a circular...
$25.60 AUD, inc GST
Piezo Element
Brand: Sparkfun
Piezo elements come in handy when you need to detect vibration or a knock. You can use these for tap or knock sensors pretty easily by reading the voltage on the output. They can also be used for a very small audio transducer such as a buzzer.
$2.95 AUD, inc GST
Piezo Vibration Sensor - Large
Brand: Sparkfun
This basic piezo sensor from Measurement Specialties is often used for flex, touch, vibration and shock measurements. A small AC and large voltage (up to +/-90V) is created when the film moves back and forth. A simple resistor should get the voltage down to ADC levels. Can also be used for impact sensing or a flexible switch.
$20.45 AUD, inc GST
Gravity: Analog Sensor Cable for Arduino - 50cm (10 Pack)
Brand: DFRobot
This high-quality 50cm analog sensor cable is equipped with a 3-pin PH2.0 plug connector on one side and a 3-pin DuPont connector on the other side. They are specially...
$11.50 AUD, inc GST
Force-Sensing Linear Potentiometer: 4.0″×0.4″ Strip, Customizable Length
Brand: Pololu
Force-sensing linear potentiometers (FSLPs) from Interlink Electronics are passive components with resistances that depend on the magnitude and location of the force applied to the strip, making it easy to add novel touch interfaces or tactile sensors to your project. This 4″ (10 cm) strip can be cut to shorter, predefined lengths (1″, 2″, or 3″) to better suit your application. An external resistor (typically 4.7 kΩ to 10 kΩ) is required but not included.
$52.45 AUD, inc GST
Force-Sensing Linear Potentiometer: 1.4″×0.4″ Strip
Brand: Pololu
This force-sensing linear potentiometer (FSLP) from Interlink Electronics is a passive component with resistances that depend on the magnitude and location of the force applied at some point along the 1.4″ (3.6 cm) active length of the strip, making it easy to add novel touch interfaces or tactile sensors to your project. An external resistor (typically 4.7 kΩ to 10 kΩ) is required but not included.
$42.30 AUD, inc GST
Similar matches
Resistor 220 Ohm 1/4th Watt PTH
Brand: Core Electronics
This is a simple, 220 Ohm, 1/4th Watt, +/- 5% tolerance PTH resistor. Sold as single units...
$0.10 AUD, inc GST
Resistor 10K Ohm 1/6th Watt PTH - 20 pack
Brand: Sparkfun
1/6th Watt, +/- 5% tolerance PTH resistors. Commonly used in breadboards and perf boards, these 10K resistors make excellent pull-ups, pull-downs, and current limiters. We’ve opted for a new and more breadboard-friendly lead thickness (they’re a bit thicker than our last ones).
$1.65 AUD, inc GST
Resistor 1K Ohm 1/4 Watt PTH - 20 pack (Thick Leads)
Brand: Sparkfun
These are your run-of-the-mill ¼ Watt, +/- 5% tolerance PTH resistors. Commonly used in breadboards and other prototyping applications, these 1K ohm resistors make...
$2.30 AUD, inc GST
Tactile Button - SMD (6mm)
Brand: Sparkfun
This is an SMD 6mm square SPST button. What we really like is the little button head and good tactile feel (it ‘clicks’ really well). This button is great for user input or a good reset button on a PCB. As this is an SMD component make sure you are well versed in soldering before attempting to incorporate this button into your project.
$1.25 AUD, inc GST
Piezo Vibration Sensor - Large with Mass
Brand: Sparkfun
This basic piezo sensor from Measurement Specialties is often used for flex, touch, vibration and shock measurements. A small AC and large voltage (up to +/-90V) is created when the film moves back and forth. A simple resistor should get the voltage down to ADC levels. Can also be used for impact sensing or a flexible switch.
$22.10 AUD, inc GST
Gravity: Flexible Piezo Film Vibration Sensor
Brand: DFRobot
This is an Arduino compatible piezo film vibration sensor. It is made up of flexible piezo film and converter board. The sensor is able to detect vibration, flexibility...
$10.20 AUD, inc GST
Piezo Vibration Sensor - Small Vertical
Brand: Sparkfun
The Minisense 100 from Measurement Specialties is a low-cost cantilever-type vibration sensor loaded by a mass to offer high sensitivity at low frequencies. Useful for detecting vibration and ‘tap’ inputs from a user. A small AC and large voltage (up to +/-90V) is created when the film moves back an forth. A simple resistor should get the voltage down to ADC levels. Can also be used for impact sensing or a flexible switch.
$27.55 AUD, inc GST
Power Resistor 10 Ohm 15W
Brand: Core Electronics
High Power Package.
$7.25 AUD, inc GST
Tactile Button - SMD (12mm)
Brand: Sparkfun
This is an SMD 12mm square SPST button. What we really like is the large button head and good tactile feel (it ‘clicks’ really well). This button is great for user input or a good reset button on a PCB, heck, we use this guy on our PicoBoard! As this is an SMD component make sure you are well versed in soldering before attempting to incorporate this button into your project.
$1.50 AUD, inc GST
Makers love reviews as much as you do, please follow this link to review the products you have purchased.