Search results for: 'expander'

50 results

Adafruit MCP23017 I2C GPIO Expander Breakout - STEMMA QT / Qwiic

Brand: Adafruit
We’ve gotten a lot of requests for a MCP23017 breakout and we’ve always sorta been like “ehh why not just use the DIP chip?” but...
$11.25 AUD, inc GST

MCP23017 IO Expansion Board, Expands 16 I/O Pins

Brand: Waveshare
The MCP23017 IO Expansion Board expands 2 signal pins as 16 I/O pins based on the I2C bus, up to 8 MCP23017 IO Expansion Board can be used at the same time, providing up to 128 I/O pins, it is compatible with both 3.3V and 5V levels.
$10.90 AUD, inc GST

Adafruit PCF8574 I2C GPIO Expander Breakout - STEMMA QT / Qwiic

Brand: Adafruit
Expand your project possibilities, with the Adafruit PCF8574 GPIO Expander Breakout - an affordable 8 channel I2C expander.GPIO expanders work like this:...
$8.95 AUD, inc GST

Gravity: MCP23017 IIC 16 Digital IO Expansion Module

Brand: DFRobot
This is an IO expansion module that based on the chip MCP23017. The module can expand additional 16 IOs. It can set 8 IIC addresses, which means with this module...
$9.93 AUD, inc GST

Pimoroni Pico Omnibus (Dual Expander)

Brand: Pimoroni
Double up your GPIO pins and attach two add-ons to a single Raspberry Pi Pico with our expansive Pico Omnibus!
$21.55 AUD, inc GST

Adafruit AW9523 GPIO Expander and LED Driver Breakout - STEMMA QT / Qwiic

Brand: Adafruit
Expand your project possibilities, with the Adafruit AW9523 GPIO Expander and LED Driver Breakout - a cute and powerful I2C expander with a lot of tricks up it's sleeve.
$9.70 AUD, inc GST

I/O Expander - MCP23008

Brand: SparkFun
Add another eight pins to your microcontroller using a MCP23008 port expander. The MCP23008 uses two I2C pins which can be shared with other I2C devices, and in...
$3.70 AUD, inc GST

MCP23008 - i2c 8 input/output port expander

Brand: Adafruit
Add another 8 pins to your microcontroller using a MCP23008 port expander. The MCP23008 uses two i2c pins (these can be shared with other i2c devices), and in exchange...
$3.95 AUD, inc GST

MCP23017 - i2c 16 input/output port expander

Brand: Adafruit
Add another 16 pins to your microcontroller using a MCP23017 port expander. The MCP23017 uses two i2c pins (these can be shared with other i2c devices), and in exchange...
$13.60 AUD, inc GST

Adafruit TCA8418 Keypad Matrix and GPIO Expander Breakout - STEMMA QT / Qwiic

Brand: Adafruit
It's a GPIO expander, it's a keypad matrix driver... its the Adafruit TCA8418 Keypad Matrix and GPIO Expander Breakout - a cute and powerful I2C...
$10.60 AUD, inc GST

SparkFun Qwiic GPIO

Brand: SparkFun
Do you find yourself wishing that you had just a few more GPIO pins? What if you only need that one more pin? You could add another microcontroller to your project...
$11.70 AUD, inc GST

GPIO Multi-Function Expansion Board (Pi 4B/3B/3B+)

Brand: Core Electronics

This handy HAT sits right on the top of your Pi, and will break out the 40-Pin header on your Raspberry Pi 3B, 3B+ and 4B into 3 banks of pins, and adjacent pins to these connect to screwless spring terminals on the outside of the board.

$6.10 AUD, inc GST

Arduino Opta Ext D1608S

Brand: Arduino
Arduino Pro Opta Ext D1608S enhances your Arduino Opta’s real-time control, monitoring  and predictive maintenance applications with the addition of 16...
$279.95 AUD, inc GST

Gravity: Expansion Board for Raspberry Pi Pico

Brand: DFRobot
This Gravity Expansion Board, specifically designed for Raspberry Pi Pico, is compatible with a variety of Gravity sensors and modules, offering...
$9.44 AUD, inc GST

LCD Keypad Shield For Arduino

Brand: DFRobot
This is a very popular LCD Keypad shield for Arduino or Freeduino board. It includes a 2x16 LCD display and 6 momentary push buttons. Pins 4, 5, 6, 7, 8, 9 and 10 are used to interface with the LCD. Analog Pin 0 is used to read the pushbuttons. The LCD shield supports contrast adjustment and backlit on/off functions. It also expands analog pins for easy analog sensor reading and display.
$15.76 AUD, inc GST

SparkFun 16 Output I/O Expander Breakout - SX1509

Brand: SparkFun

The SX1509 Breakout is a 16-channel GPIO expander that adds fully configurable digital I/O to your microcontroller using just two I2C wires. It also handles PWM for LED dimming, can blink or breathe pins, and has a built-in keypad engine for up to 64 buttons.

$13.35 AUD, inc GST

Adafruit PCF8575 I2C 16 GPIO Expander Breakout - STEMMA QT / Qwiic

Brand: Adafruit
Expand your project possibilities, with the Adafruit PCF8575 GPIO Expander Breakout - an affordable 16 channel I2C expander.GPIO expanders work like this:...
$10.70 AUD, inc GST

Pimoroni IO Expander Breakout

Brand: Pimoroni
Add oodles of extra analog-friendly input and output pins to your Raspberry Pi project!
$16.45 AUD, inc GST

Pimoroni Pico Decker (Quad Expander)

Brand: Pimoroni
Quadruplicate your GPIO pins and attach up to four add-ons to a single Raspberry Pi Pico with our formidable Pico Decker expander board!
$33.80 AUD, inc GST

Adafruit GPIO Expander Bonnet - 16 Additional I/O over I2C

Brand: Adafruit
The Raspberry Pi is an amazing single board computer - and one of the best parts is that GPIO connector! 40 pins of digital goodness you can twiddle to control LEDs...
$18.25 AUD, inc GST

Pololu RP5/Rover 5 Expansion Plate RRC07A (Narrow) Solid Black

Brand: Pololu
This expansion plate for the Rover 5 tracked chassis is made of 1/8" (3mm) acrylic. The numerous 3 mm wide slots give you the flexibility to mount components in a variety of orientations almost anywhere on the plate.
$12.75 AUD, inc GST

Pololu RP5/Rover 5 Expansion Plate RRC07B (Wide) Solid White

Brand: Pololu
This expansion plate for the Rover 5 tracked chassis is made of 1/8" (3mm) acrylic. The numerous 3 mm wide slots give you the flexibility to mount components in a variety of orientations almost anywhere on the plate.
$20.75 AUD, inc GST

micro:bit Expansion Board for Boson (Gravity Compatible)

Brand: DFRobot
micro:bit is a pocket-sized microcontroller designed for kids and beginners to learn coding and electronics, letting them easily bring ideas into DIY digital games...
$15.44 AUD, inc GST

TPIC6B595 High Power Shift Register - TPIC6B595

Brand: Adafruit
Add a bunch of high-power outputs to a microcontroller system with chainable shift registers. These chips take a serial input (SPI) of 1 byte (8 bits) and then output...
$3.85 AUD, inc GST

IO Zero 32

Brand: AB Electronics
32 channel IO expander for the Raspberry Pi B+ computer boards...
$25.65 AUD, inc GST

PiicoDev LiPo Expansion Board for Raspberry Pi Pico

Brand: PiicoDev

The PiicoDev® LiPo Expansion Board for Raspberry Pi Pico is a great way to start experimenting with Raspberry Pi Pico/RP2040. Use the on-board PiicoDev connector to quickly and easily connect with the PiicoDev family of sensor modules without soldering.

$5.40 AUD, inc GST

Seeeduino XIAO Expansion board

Brand: Seeed Studio
A functional expansion board for Seeeduino XIAO of only half Raspberry Pi 4 size. With OLED display, embedded RTC, expandable memory mini SD card slot,...
$28.45 AUD, inc GST

PiicoDev Expansion Board for Pico (Non-Recharging)

Brand: PiicoDev

Start experimenting with high-tech sensors and modules with Raspberry Pi Pico/RP2040. Use the on-board PiicoDev connector to quickly and easily connect with the PiicoDev family of sensor modules without soldering.

$5.90 AUD, inc GST

PiicoDev Platform for Raspberry Pi

Brand: PiicoDev
Our PiicoDev® Platform For Raspberry Pi is perfect for rapid prototyping projects with Raspberry Pi Boards and hardware
$5.95 AUD, inc GST

Argon ONE M.2 Expansion Board

Brand: Argon40
Argon ONE M.2 Expansion Board extends support for M.2 SATA SSDs to maximize the true potential speeds of your Raspberry Pi 4. You will now be able to boot via an M.2 SATA SSD for faster boot times and larger storage capacity compared to the traditional microSD Card.
$40.55 AUD, inc GST

Adafruit Qwiic / Stemma QT Breakout Board

Brand: Adafruit
We got a request from a customer for a board that makes connecting between a breadboard and Stemma QT or Qwiic components easy, and here's what we...
$3.80 AUD, inc GST

IO Expansion Board for Raspberry Pi Pico

Brand: DFRobot
This IO expansion board brings out all IO pins of the Raspberry Pi Pico onto male and female connectors. All pins are clearly labeled to allow beginners...
$6.95 AUD, inc GST

GreatFET One

Brand: Great Scott Gadgets

Open-source USB development board for hardware debugging and embedded systems, with logic-level GPIO, protocol sniffing and scriptable peripheral emulation.

$154.95 AUD, inc GST

Acrylic Case for Seeeduino XIAO expansion board

Brand: Seeed Studio
It is a good plastic box for Seeeduino XIAO expansion board, which can protect it with one of these snazzy plastic enclosures....
$6.35 AUD, inc GST

M5Stack 1 to 3 HUB Expansion Unit

Brand: M5Stack
HUB is a unit that is used in order to expand the GROVE ports over the M5Stack device. For example, if we want sensors with different IIC addresses or output to 3 devices at the same time. (M5Stack device usually can output one device at a time to to limited amount of grove ports)
$7.25 AUD, inc GST

IO Expansion Hat for Raspberry Pi 3/4/400

Brand: DFRobot
When making Raspberry Pi projects or learning to use Raspberry Pi for python programming, we may often need to check its Pinout Table to find out the BCM and WiringPi...
$8.77 AUD, inc GST

IO Expansion HAT for Raspberry Pi 4B/3B+

Brand: DFRobot
This IO Expansion HAT from DFRobot is the perfect companion for your Raspberry Pi 4B/3B+! It leads out all of the IO ports on Raspberry Pi including digital port...
$15.67 AUD, inc GST

UPS Expansion HAT for LattePanda Sigma Single Board Computer

Brand: DFRobot
The UPS HAT is an expansion board for LattePanda Sigma SBC, featuring 18650 lithium-ion batteries, TypeC PD and 5.5mm DC interfaces for external power...
$82.92 AUD, inc GST

Vertical M.2 Expansion Support Case in Aluminum Alloy for LattePanda Sigma

Brand: DFRobot
The expandable Aluminum Alloy Vertical M.2 Expansion Support Case is designed for LattePanda Sigma, suitable for installing various non-standard M.2...
$68.25 AUD, inc GST

Expander Pi

Brand: AB Electronics
Expander Pi is a versatile digital and analogue expansion board. It allows you to connect your Raspberry Pi to switches, lights, sensors, and many other devices giving you a way to communicate with the outside world.
$46.50 AUD, inc GST
Feedback

Please continue if you would like to leave feedback for any of these topics:

  • Website features/issues
  • Content errors/improvements
  • Missing products/categories
  • Product assignments to categories
  • Search results relevance

For all other inquiries (orders status, stock levels, etc), please contact our support team for quick assistance.

Note: click continue and a draft email will be opened to edit. If you don't have an email client on your device, then send a message via the chat icon on the bottom left of our website.

Makers love reviews as much as you do, please follow this link to review the products you have purchased.